Dice Cap Molds- No pressure pot required!
ฝัง
- เผยแพร่เมื่อ 11 มี.ค. 2021
- The most asked for video on my channel is finally here. This is a step-by-step process video for making dice molds without the use of a pressure pot. I discuss the whys behind every step along the way, so whether you’re new to the dice-making hobby or a master caster, I hope everyone takes away something new! If you enjoy this video, make sure to check out my other ones and like and subscribe! You can also follow me on Instagram @piercefamilyresins and check out my other links on link tree: linktr.ee/PierceFamilyDesigns
Full List of Supplies:
1. Dice masters
2. Mold making silicone (I use Let’s Resin)
3. Disposable cup and stir stick (NOT SILICONE)
4. PVC fittings (1 or 1.5” for individual molds, 4” for a slab mold)
5. Packing tape (I use 3M scotch tape)
6. High heat glue gun and hot glue sticks
7. Small items to use as keys (I use cabochons and fake gems)
8. Exacto Knife
9. Toothpicks
10. Petroleum jelly
11. Clean eyeshadow/mica applicator OR cotton swab
12. PATIENCE - แนวปฏิบัติและการใช้ชีวิต
I got a little over excited trying to get into dice making and didn't realize that a lot of the stuff I bought was dependent on using a pressure pot and I got very discouraged, very quickly. So this video is an absolute life saver and I am so excited to try again at making my own! Thank you so much!!
3fffdf
I totally understand you, I bought a lot of stuff and I was very very sad that I couldn't have my own molds without a pressure pot
The little hint of a kitty watching just as intently as we are was positively charming
I've found a way to keep the Let's Resin silicone liquid long enough for it to release all the bubbles without using a pressure pot! I put my silicone in the fridge for 30-60 minutes before I begin working, then I mix the silicone, pour the mold, and put the whole thing back in the fridge to de-gas for another 30-60 minutes before removing it and letting it cure as normal. It's legit magic to come back and see the mold come out of the fridge completely bubble-free and still liquid. I've also done small-scale tests and managed to keep the silicone liquid in the fridge for over 3 hours! I also didn't mix slowly and ALL of the bubbles were released from my small sample batch within 30 minutes. The next time I make molds I'm going to let the silicone de-gas in the fridge after mixing and before pouring the mold, then again after pouring the mold to attempt to reduce the chance of bubbles around the numbers even more. I didn't have any issues with bubbles in the numbers last time using your pre-treatment method, but it's a lot of work (as you said) and I want to see if the fridge method works just as well.
Any updates on how this went? Really cool idea to try to de-gas the silicone with slightly less work.
@@samanthaklaver8541 The silicone degassing (putting it in the fridge both before and after pouring) went super well! I'm running into issues with my masters, so I haven't tested the whole process to see if it means you can totally skip the number pre-treatment. But I can confirm that putting the mixed silicone in the fridge for 30 minutes before you pour will totally de-gas the silicone prior to pouring, and putting it in the fridge after pouring will eliminate bubbles that may have formed during pouring (except possibly any bubbles caught in numbers, which as I said I haven't tested yet).
I'll try to remember to post an update once the test is complete (I think I have the issues with my masters mostly solved), but if there isn't an update in like 1-2 months, feel free to remind me in case I forgot.
@@tephwilliams Hi! Did you have a chance to see if one could skip the pre treatment with your method?
@@tephwilliams any updates?
@@katiekoo-koohead2551 No, sorry for being a flake. I keep meaning to test it, but I haven't had much time to do resin stuff so it hasn't happened.
You gave me hope to make a nice dice without a pressure pot! Thank you very much, it's a great wideo ❤️
So happy I could help
It's been 5 months, update?
I watched this video, then I purchased everything to do this. Totally had you within reach while making this mold! It worked, the mold is amazing and I know you made this awhile ago but God thank you thank you so much for making and sharing. All this so I could hand make a dice set for my bf and anyone else in the group who'd like a pair! Lol!! ❤️❤️❤️
Never apologize for cat. Excellent tutorial, thank you for creating!
Thank you for watching!
Exactly! It's lovely when the fur babies know something is important to us, and they want to participate!
I just made my first set of dice with cap molds before watching this video. Lot of bubbles and I wasn't happy with how they sealed. This video was very informative and I'm confident that I can make a slab mold myself now!
I’m so glad to hear that!
Hey I used your technique to make my own dice! They came out awesome, but my main problem is im really bad at sanding down the side with all the extra resin from the mold. Ended up ruining that side :(. Have you thought about making a sanding and polishing video? Would love to see your technique.
Hi Jack! I’m glad to hear about your adventure in dice making! As a matter of fact, I am hoping to film and edit a video on that topic this weekend
Oh my gosh I'm so happy to have come across this! I just started getting into resin and really want to make dice but I was panicking when I saw all the makers using pressure pots. I can't afford that right now so, this is SO helpful thank you so much!
You’re welcome! You can still get a good set of dice without a pressure pot, it’s just trickier and requires practice and patience. I was eventually able to sell enough dice made without a pressure pot to buy a pressure pot when I decided to start seriously selling dice.
Can I just say that I love you? Lol... but seriously, thank you! This is brilliant and so helpful to those that don't have the finances to buy all the fancy equipment.
I can now make my D&D group their own character dice ♡
You are most welcome!
I was very iffy about trying my hand at dice making but honestly this is probably the best how to on how to make your own molds I've come across and I am excited to try it now. Between what I've seen from you and rybonator I'm certain I can come up with something good!!
So happy to hear it! Happy dicing 🎲
Fantastic video and explanation, exactly what I needed to see to give me the confidence to give dice making a try!
This is such a great video. Thanks so much! Great detail! Ready to make another mold!
Wonderful video! Clear explanations and images, and I really appreciate all the detail. Looking forward to giving this a try!
Wow i didn't know this was possible, i will attempt to make my own molds with your technique, thank you for the tutorial!
Thank you so so so much for this video!!!! I made my first cap mold with this video and it came out absolutely perfect
This gave me hope on making my own molds for resin art!!
This was the most helpful video. Thank you.
Wow these videos are really good and informative. Can't wait to see sanding and finishing.
Thank you so much!
I usually use a pressure pot for making my moulds but this video has a lot of useful info to making great moulds. Thanks for the great information 😁
This an awesome video! I want to make dice for my son for Christmas, and after watching so many videos THIS is the one I will use!! It is so clear, and your technique is fantastic. Thank you for taking the time to share! Happy Holidays!! (of course now I have to look at your other videos hahaha)
I have watched so many videos and yours is fantastic. I often wondered about doing the technique you did, pre swabbing them. I also had wondered about doing it with the resin. Anyway, you did a fantastic job with this video.
Thank you for turning me onto Arcana Cast. I'm looking forward to buying some masters soon.
Absolutely fantastic!! I'm not new to making molds, but I am new to making molds of 3D objects. This is a lifesaver!!
This was fantastically informative. I've been wanting to make dice for a while. I'm glad there is a way to do it without a vacuum chamber setup and a pressure pot. I wasn't looking to invest a lot to get started.
I wanted to say thank you so much for sharing this process. I really wanted to get into making dice but I lack room and cash for pressure pots and vacuum chambers (maybe someday though if I really get into it) and I just tried this method out to make my first slab mold. It's winter where I am and its a pretty dry cold so I found putting my mold out on the porch for about 45-60 minutes right after pouring the silicone also helped reduced the bubbles a lot though it extended the time it took to cure once I brought it back inside. I got little nervous that things wouldn't turn out but it all worked out in the end. Now I can't wait to get to pouring some resin in my brand new mold. :D
I have watched a few of your videos about dice making without pressure pot. I was about to give up on my dream of making my own dice because a pressure pot is way out of my reach at this moment, but because of your video's and your tips I am ready to give it a try :)
A friend of mine will print my own designed dice and from there I'll use your methods of getting molds (without cure inhibition I hope) and dice.
So massive thank you!!
I've been using Let's Resin and it works really well amd I'm brand new to the scene.
your videos are just amazing!! i'm searching on how to make molds for rpg dice set for a week now and let me tell u someting.... i've learned A LOT more in your videos than the other more views. Thanks a lot for sharing your exp with us!!
I’m happy I could help!
Thank you! This was a great tutorial
This is so informative! My first set of molds was quite full of bubbles on numbers and the work time was so short! Next time I'll follow your instructions, thank you so much for this!
You are most welcome!
Oh I totally need to try this
Thank you! I want to make my own dice but I felt so discouraged bc I can't get a pressure pot rn. Excited to try it after watching your video
Really good video, thanks!
This is a very informative video and I really like the way you explain each step. This method is way better than the molds you buy from Wish and Amazon. Don't get me wrong, they make really good chocolate and candy molds.
I was using PVC pipe or connectors for a long time for making 8", 6", 4", 2" and 1.25" molds pretty much doing exactly as you are doing with creating a new bottom and hot gluing it on to the each time. As I got busier and was producing more and more molds this added a great deal of extra time that added up to a good bit of what seemed like time I was wasting simply making new bottom seals for the mold. In the hardware store on day picking up another length of PVC for cutting to length for how deep I wanted my molds I stumbled on a sales bin where the were getting rid of old stock PVC end caps that come in the same dimensions of pipe I use. The caps are more then sufficient in height for my molds and the upside was since it was a cap to terminate the pipe, it came with a bottom that was all part of the cap so not huge messes as there is no way it can spring a leak unless you drill a hole in it. You can make both the mold itself and the cap in it, just using different depths of the silicone. I do use a mold release product that I apply a good spray of after I remove a mold and clean the cap, let it dry with the open end down so the mold release stays well and ready for next use. I like to use a mold release if I have fine detail in the face I pretreat with silicone as you do, not just the numbers but engraved areas for the style of dice I am making. Those areas are always fragile and nothing is so depressing as to remove several die or jewelry items from the hardened silicone and have even just one small ridge, number or detail tear away because it stuck to the Item I was making the mold from, or no matter how carefully you check to make sure the PVC is still shiny and the mold tears as it sticks to the PVC when removing it, its not a mold one can then sell. Using the PVC cap also gives a much more professional look to a finished mold without spending time time having to clean up where the pipe was hot glued to the parchment and tape or cellophane for the bottom. And you not going to have a nasty surprise when you come to check the mold some time later and a slow leak, not noticeable at first, has leaked out 25% of your silicone and part of what you are trying to copy has no longer covered in the original silicone pour, and you may have bubbles that have invaded at the leak point and your mold is probbaly not salvageable except for your own use. Using the caps has really cut down my loss of product, which can be costly, buy eliminating leaks from the mold bottom
I've been wanting to make dice for so long now, I have everything I need already but I've always put it off because of the molds and this video helps a lot more than other's I've seen. Also I had no idea that chessex dice designs were copyrighted and unsellable and that's really useful info cause I was totally planning on doing that! So thank you very much!
You’re very welcome!
A very well done tutorial. Having made molds, of all types, I was thinking wouldn't it save time if instead of separate tape and large tape tape base, you did the three tape base and stick the dice directly to that. You can test fit before laying tape and mark the dice positions on the paper.
This is just what I needed thank you!! :D
You are most welcome ☺️
This was a really great video. But I need to give a gigantic thanks for linking the testing video by Richard Thompson. I've been looking for months for a video just like this one and despite searching all the words used in the title I was never given this video in my results. So yeah, thanks a bunch for referencing that because it's been mighty helpful :)
I have always been nervous about making dice because it uses chemicals and pressure pots can be dangerous. This video eased my nerves and I am preparing the materials to make my first dice set! Thanks!
really really good Tutorial, You have a nice voice to listen to and your Videos are well structured. Well made I hope you will make more Videos soon and keep on doing :)
Gosh thank you so much!
My mom bought me molds off wish so I don't know much about them but I am gonna try all this cause I don't have a pot so thankyou much love 💕
I just did a mold like it is shown in this video and I have to say: THANKS a lot! THe silicone rubber ist just perfectly bubble free and my dice came out perfectly shine and I have to do almost nothing for a finish. It is so good and I really recommend investing a little in the silicone as it is not the cheapest, but it definitely pays off.
I started off using the well know cheap dice mold with the little whole in the top - you guy know which I mean - and i had to do a lot to the dice afterwards or do a several step pouring. This cost time and is really not as satifying but rather disappointing. In this case i just made the dice in one pour and i am really happy with the results.
Thanks so much for sharing this with us and showing a step by step tutorial. I am so happy, I found the video. :)
Pixiss Silicone works great. I have used it for all of my molds with no pressure pot and no bubble issues.
I always had trouble with my numbers so gonna try that tip
Great video thanks
Thank you for this video! :-)
I just wanna share a few tips I have on this after doing various techniques and arriving at what works for me:
- You can use the top of a spray can if you don't have any fittings. Yes, getting fittings is for sure best, but I got that urge to create that MUST be scratched on a day where the stores were closed. So lids from spray paint or, in my case, lighter gas cannisters, works well too. They're even flexible to help with removal.
- I have had the same issue with not being able to visually tell when my silicone is mixed. I fixed this by adding alcohol dye, though it dawned on me after that powder pigment might work better. I now have one pink and one green! And as you can dye silicone anyway, this doesn't seem to impact the final product. The only downside is that you no longer have the colourless silicone, so if you do more than just moulds with your silicone where colour might matter, this is not a good way to do it. But I like it
- If your silicone arrives in big jugs instead of convenient bottles(like mine did), bakers and cake decorators use these sort of "condiment bottles" often for decoratively running lines of chocolare or whatever over your food. If you cut the tip off of these to make the hole slightly larger, they work amazingly for dosing silicone
ball bearings are good for mold keys but you are the video expert shower I'm just the new year's eve drinker.
Great video. It's interesting to hear about the 3D printing option.
The big thing I wonder with that is the horizontal lines that come with all printed objects.
Note: I'm just interested in learning the processes for making dice. I'm most likely not going to get into the hobby myself. Short of winning a small lottery.
In regard to the use of keys, it makes sense to leave a few cabochons in there so they too become molds for more cabochons from excess resin when forming the cap, i like that you have lots of keys and just see that some are possible additional places to use resin, moreso if its a color mix you really like.
Good tutorial, though if I could impart one lil bit of advice;
When pouring the silicone into the cast, you're correct it's important to pour from a high stream, but also consider pouring it from one spot (not moving it around everywhere). Moving the stream around whilst slowly pouring things can also trap air bubbles, so it's advised to simply pour in one spot, and simple let the silicone slowly creep and fill in the entire area (preferably away from any of the molds themselves).
Your nails looks so great and beauty)
I've had good luck using the smooth on slow 15 ...pot about 50 minute work time and 4 hr set up... I cast small things in it, so it can reach into corners well and smaller Impressions... I was curious about the let's resin so good to know!
I’m working my way around the smooth-on products. So far I’ve found the ecoflex might work ok without a pressure pot and sorta clear is a definite no go with no pot. I have not tried the slow 15 so thanks for sharing about it!
WOW, this looks great!!! You are so informative for these molds. I just recently started using Zona papers for sanding my dominos. Do you notice a huge difference between dry sanding and wet sanding? I noticed that although the zona does a great job, I can never get close to the original resin flawless finish by dry sanding by using all the different papers.
Hi Sandra! I find there’s a lot more resistance (friction) when dry sanding which leads me to apply too much pressure and get scratches. That said, the 2 and 1 micron zones are magic with or without water. I also do wet sanding just because it keeps the nasty resin dust down.
hi, can you possibly link to the silicone and where to get the dice masters?
great video!!! ty
A tip for trimming the tape @ 11:00 Just use scissors instead of an xacto knife. Kind of a duh moment there. The only problem you might have with using scissors to cut tape is an eventual build up of sticky residue on the blades, but that's easy to clean off with some acetone, and really barely an inconvenience compared to slicing open your hand with an xacto.
Hi! This is a great video! I started doing my own. Quick question: the consistency seems a bit runny and runs off the numbers. How do you keep it from doing so? Is there a way to thicken it? Thanks!
What the heck why would someone thumbs down such a clear and concise video. Excellent work now I have a new idea how to make my molds.
I’m glad to hear I could help!
I wanna see how these came out when you used them!
This is super helpful! You mention having read the MSDS for the Let's Resin silicone, but I can't find it on their website. Do you have a link to it?
I've done the bottom so far and I'm waiting for more silicone to finish the top. If I notice a bubble or two on the top near the embedded dice, will those hopefully fill up when I do the top as long as I don't coat them with the petroleum jelly?
Love your videos and your dice looked awesome. What do you use to polish?
I use a mix of regular wet/dry sandpaper and zona polishing papers
How many pulls do you generally get with the Let's Resin molds vs the other brand you mentioned?
Hi, just me again . . . just noticed, you're doing this on your beige carpet, Brave girl to say the least!!!!!!
😅 using the space I have lol.
Ya know, there is this "new" product out there called "a self-healing cutting mat" which probably would be sooooooo much better than your non-self healing fingers!!! Safety first!!! Aside from that, I love your video, thank you so much for sharing! Cheers!!!
Yeah I’ve rewatched this and just end up back at “what was I thinking???”
At 999 subscribers so I subscribed
Thank you so much!
Have you tried any other brands of silicone for making molds without a pressure pot? Ive been using the Alumilite Mold Maker silicone that I can get at my local hobby/craft store. Any other suggestions?
"Kid legos" SO there are adult legos. Sickkkkkkkk
So I just got a set of masterdice finished sanding and them and getting them nice and pretty for casting molds. Then I use the lets resin silicone and followed this method and had to stop after covering the numbers in silicone. For some reason the silicone is not curing wherever it touches the dice. Any ideas what might be happening? It cures wherever it pools around the dice but won’t no matter how long I let it sit on the dice. 😩
Thank you for this video. It gave me hope for making molds without pressure pots. Also have you tried putting Vaseline on the inside of the pvc pipe for the bottom or would that not work because it's not solidified yet?
Yes I have. I just don’t love the mess it makes and it works fine without doing it if you are patient in removal. I know plenty of makers who do that successfully though
I'm curious if you ever used something that's "door knob" shape so it would actually lock into place as opposed to just a round ball?
do you have to clean the petroleum jelly off after separating the lid?
Not planning on making dice anytime soon, but I want to make little resin doll parts and I'd like to make a mold out of them so I can make multiple dolls - but I don't have a pressure pot. This gives me hope that I could apply these techniques to put together a mold that can work easily for multiple dolls. (I've been trying to use Mold Maker Putty to make my molds, but that's been a struggle for me and it'd be nicer to make molds with something pourable.)
Yes, you can absolutely apply these techniques for dolls. Just make sure you aren’t using a sulfur based clay to make the parts, of if you do, dealt them well before mold making. Otherwise you might see inhibition
@@KaitlinPierce Does Sculpey have a sulfur base? Because that's the type of clay I have. (It says it's nontoxic...)
The sculpey site says it is sulphide free, so you should be ok! A quick internet search showed that a lot of sculpy artists bake and seal their pieces with something called “crystal clear” to get nice clean molds. I hope that helps!
With the silicone-ing of the numbers: have you ever had it that the number did not peel away from the die as intended? Also now you’ve had a chance to use both your single molds and one giant one, do you have a preference? I super appreciate your your videos. Gives hope to the common hobbiest. Thanks!
Hi Carole. I have not had an issue with the numbers. Silicone bonds to itself really well so as long as you don’t put any sort of release on it before pouring the base, it will bond.
As for preference, even though the big slab molds use less silicone and are easier to handle in some ways, I still prefer singles. I find it easier to prevent voids and if one mold gets damaged, I can replace just that one instead of the whole thing.
i really feel like you made that a hundred times more complicated than it needed to be
Could I hot glue or somehow tape some toothpicks on the master dice to make sprues so I don't have to fiddle with a blank side?
Is there any issue using a silicone mold in a pressure pot that wasn’t pressure treated before hand? Can you just fill this with resin and not get air bubbles in the finished dice if you don’t put it in a pressure pot?
What do you use to clean the Vaseline off of the mold?
can you make keys with hot glue?
like, obviously not durning but ahead of time?
could I use some kind of plastic container instead of the pvc? also can I just cut the keys in the sides instead of all the internal keys?
Yes and yes. I know some makers who use those plastic deli containers. I also know some who buy a small spring form cake on designated for mold making. I’m experimenting with different key placement right now to see what I can come up with for optimal placement to see about avoiding those internal bits. I’ve seen makers do it without them
So I used this method, I am making dice for the first time. The mold came out perfectly thx to this amazing video! But when I put the cap on, it sometimes creates bubbles on the edges of some of the dice/epoxy. Any tips on that?
There are a couple of ways to deal with those “voids.” I should probably do a video on that too. The first thing to try is to put some resin on the cap before closing it. The other is to make sure the resin is spread to all the edges and especially the corners.
Could you not use a hairdryer on the silicone to get rid of bubbles... Kind of like the same way that heat helps resin release bubbles??
Certainly! My little Jamberry heater just happens to be what I have handy and is more compact, but works exactly the same
I can now feed my hidden dice goblin at fraction of the cost.
Hey, I found some mold making stuff at Hobby Lobby called Amazing Remelt. I was wondering if you could do a review on this and give your opinion? Thanks!
I can look into it!
Where can I get the molds from great job
I haven't seen any videos of dice makers trying this, I suppose it's harder to make but... Have you considered doing 'half and half' style molds for dice so that the profile is split in half, you join the molds, pour from the top and once the resin is cured you separate the halves and the die is easier to pull out?
So there is one person trying this. Kingsfell mold system operates in this principle. I have not tried it myself, but it looks intriguing: th-cam.com/video/BAgr6F67Up0/w-d-xo.html
I just ordered some Let's Resin silicone to make some dice molds! Is it possible to add mica powder to the mix to color the silicone? My thought being that it'd make it slightly easier to see where to put the jelly.
Absolutely! I sometimes add about a quarter teaspoon or so to a batch of mica for color. Generally, I leave my lids clear though to see if there are voids while capping.
Thank you so much for your tutorial! I had a question. Do you know if we don't have a pressure pot, if we could just use a pressure cooker? I'll still try this method, without a pressure pot, though.
That’s a great question. I have never considered it. I assume you are talking about something like an instant pot? I suppose you could if you could meet certain conditions: the ability to apply steady pressure of at least 15-20 (though most makers use 40psi) for the duration of your resin cure which is usually between 12 and 22 hours or your silicone cure which is usually 4-12 hours. Then it would need to able to obtain and hold that pressure without heat as that would speed cures up which you definitely don’t want. Lastly, it would need to work without water as humidity is not friendly with resin or with silicone.
Many people have had success putting molds to cure in their refrigerator to slow the cure and allow more time for bubbles to surface.
I looked into this and because an instant pot uses steam it won’t work.
Even doing (mostly dangerous) modifications, to a cooking pressure pot, they have a maximum allowed pressure of 15 PSI, while silicone and resin requires at least 30-40 PSI to remove bubbles.
This also gives me hope to some day make my own molds. It's just coming up with the masters. Ever consider making and selling your molds for those of us who cant well, acquire everything? Everywhere I see for molds sell them for like 30-50+ for a single dice. It's just... damn. I'd have thought such would = the cost of the silicone + time or something.. not... breaking bank. I can see why they say its cheaper to make your own. The only issue I'm finding really is getting the masters to even start such a project and those cost even more than the pre-made molds for a single dice again. Do you know of any other dice sets out there that are generic that could be used as masters? Or you know, sell your own mold sets (hopefully at reasonable price) but thats wishful thinking :3
I don’t sell molds yet, but I may do a pre-order to test the waters. Yes, masters are expensive! They are really a worthwhile investment for those SURE they want to do this as a business rather than a hobby because they pay for themselves after about one set of molds (assuming you use them up until they start breaking down). That’s why I started with dice from a manufacturer during the hobby/trying-it-out phase.
@@KaitlinPierce Yeah I'm using some pre made molds myself atm though once friends caught wind of what I was doing there all MAKE ME A SET, how much for a set? I MUST HAVE A SET! and im all... welp...
I don't think I can with this set. plus I lack a means to remove bubbles from them though I am investing in a pressure pot. But yeah atm masters alone are stupidly costly everywhere I look and also none of them seem to be of the standard sized dice. There all 'bigger' versions and while okay I'm a fan of the normal size.
By the way, give this a try:
th-cam.com/video/XYCML79vfDU/w-d-xo.html
it's a home made molding compound that's also re-useable. Just microwave and re-cast the mold. it apparently holds details well and people have used it for dice.
what was the weight of the silicone for the mold parts?
Ive attempted to make molds with this stuff and fail both times. Ive tried weighing them evenly and keepin it at 75 in my apartment. Ive tried different containers and stirring tons and tons…
Any suggestion?
I loved the video! And am planning on making a mold as well. However I want to use metal dice as my masters. Is this a problem?
It shouldn’t be. The silicone doesn’t stick to metal or any of the plastics I have encountered. Best of luck!
@@KaitlinPierce thanks! Came out great with no issues that I can see right now
Are you trying to keep or reapply petroleum between the top and bottom mold sections when using them? Or can you now wipe them clean and they're good to go?
Once the mold is done, the petroleum jelly can be cleaned off. You don’t need to reapply!
Would you ever sell your molds I can find resin in my area but I can’t find silicone but I love your work
I bought China molds first, to see if I would indeed enjoy the process and all, but I also don't have the pressure pot, what should I do? Or you think that if I just put the resin on them may work without bubbles? I'm kinda lost, appreciate some help
The same techniques will work, but the China molds are more prone to voids because of the holes in the lid
rubbing alcohol can make hot glue unstick itself for an easy release
As someone who can't afford masters, I'd really like to know what exactly about chessex dice is copyrighted. The shape? The font of the numbers?
So which dice could be used for selling? I would like to start my own etsy shop, but I am not sure what dice master to use. Thank you for the video
Usually you look for dice masters made by someone who advertises that you can sell products made with them (arcana cast and revel broker productions are both excellent). This is a good path if you want to make your own molds. If, however, you want to try out the hobby a bit cheaper a more short term solution is to buy ready made molds advertised as free use. You’re best off investing a solid set of molds from a dice maker though rather than the Amazon or wish molds. Those super cheap molds are very hard to work with and most everyone I have talked to replaces them with something better almost immediately. Nanolabmaker, werpydice, and Druid dice are all fantastic artists who produce good quality molds.
@@KaitlinPierce Thank you! That is super helpful.
I'm new to making dice and would like to try and sell them. What would be the best way to get a set of master dice?
I would recommend looking on etsy, but also look on Facebook for “The Great Library of dicecraft” and “Dice making as a business” groups. They are a wealth of information and experienced makers!