I am using your technique to 3D print a cyclone vacuum (tangential inlet with HEPA and carbon filters) in which both the overall size and the geometry (Swift, Lapple, Stairmand...) may vary. FreeCAD's manual webpage explains a lot but isn't thorough enough. Your tutorial works. Thanks a lot !
Great tutorial, indeed! Thank you. Any idea, how to use a spreadsheet with two sets of variables? For example, think of ER collets for holding workpieces or tools in a lathe or mill. The collets come in different size classes like ER11, ER16, ER20, ER32 and so on. This class defines the outer size of the collet. Now for the hole in the collet. The classes do have different capacities, e. g. ER11 offers holes from 1 mm to 8 mm in steps of 0,5 mm, while ER32 has a range from 3 to 22 mm in stepts of 1 mm. Is there any chance, to do this in FreeCAD with two selctions: one for the ER class and one for the hole diameter?
I viewed this video 1 year ago and was having trouble and commented, now I have come back around and am having to watch this again but, because I searched the word "expressions" this time, funny thing is I have improved my knowledge and experience in FreeCAD, so I didn't make the same oversight. I am sharing the following link that explains what will help you, just in case you have not resolved your need yet. I am always learning in FreeCAD. (th-cam.com/video/tUuCQl6Uh6U/w-d-xo.htmlsi=IcVpq8xXa6m2PuQC)
Great video thanks When I change to a different size everything works except for my hole diameter stays at the same size? Any suggestions as to what have I done? wrong
Hey, My problem came from using the hole and not pocket. Yes, you first did say hole but you actually used the pocket but you did bring this to everybody's attention. So I was tracing everything down and found "MY" mistake.
I appreciate your tutorial and company most of all You feel much more like a brother to me and i hope to see you some day You also sound like someone I know on youtube who enjoys similar RC hobbies If i could convert my love into dollars you will definately be a million if you are'nt already Sincerely thank you and lots of 💌💌💌💌💌💌 ejike
Thank you. This is the type of tutorial I like the most. Very dense, a lot of information without smalltalk of storytelling. Well done.
"I hope this was helpful".
HELL YEAH. That's amazing. Thank you.
Brilliant! Well structured and concise. Many thanks!
I am using your technique to 3D print a cyclone vacuum (tangential inlet with HEPA and carbon filters) in which both the overall size and the geometry (Swift, Lapple, Stairmand...) may vary. FreeCAD's manual webpage explains a lot but isn't thorough enough. Your tutorial works. Thanks a lot !
Great tutorial. It would be even better if you could share the final spreadsheet after all the retyping is done. Thanks
Great tutorial, indeed! Thank you. Any idea, how to use a spreadsheet with two sets of variables? For example, think of ER collets for holding workpieces or tools in a lathe or mill. The collets come in different size classes like ER11, ER16, ER20, ER32 and so on. This class defines the outer size of the collet. Now for the hole in the collet. The classes do have different capacities, e. g. ER11 offers holes from 1 mm to 8 mm in steps of 0,5 mm, while ER32 has a range from 3 to 22 mm in stepts of 1 mm. Is there any chance, to do this in FreeCAD with two selctions: one for the ER class and one for the hole diameter?
I viewed this video 1 year ago and was having trouble and commented, now I have come back around and am having to watch this again but, because I searched the word "expressions" this time, funny thing is I have improved my knowledge and experience in FreeCAD, so I didn't make the same oversight. I am sharing the following link that explains what will help you, just in case you have not resolved your need yet. I am always learning in FreeCAD.
(th-cam.com/video/tUuCQl6Uh6U/w-d-xo.htmlsi=IcVpq8xXa6m2PuQC)
Great tutorial. If I now want to make two Bodys which both access the same spreadsheet how would I accomplish that ?
is it possible to control feature or body visibility with boolean in cell True/False -> show/hide?
Thanks for this video FreeCAD
how to make 2 or more bodies refer to the same spreadsheet without copying it?
Amazing tutorial, thanks.
excellent tutorial 🥳 now only remaining part was creating link with configuration table 😅.
Great video thanks
When I change to a different size everything works except for my hole diameter stays at the same size? Any suggestions as to what have I done? wrong
Hey, My problem came from using the hole and not pocket. Yes, you first did say hole but you actually used the pocket but you did bring this to everybody's attention. So I was tracing everything down and found "MY" mistake.
For your information, the current version of freeCAD is 0.21.
Spreadsheet quantity elements techdraw workbench freecad doors and windows? Thanks for this video FreeCAD
I appreciate your tutorial and company most of all
You feel much more like a brother to me and i hope to see you some day
You also sound like someone I know on youtube who enjoys similar RC hobbies
If i could convert my love into dollars you will definately be a million if you are'nt already
Sincerely thank you and lots of
💌💌💌💌💌💌
ejike
My one objection is that you like typing too much. Instead of "Spreadsheet", call it "SS" or "Data" or "Dat" or "C150".
It doesn't like "T"s because it gets confused with the cell name "T1", "T2", ...