How To Fix a Shaking Lawn Mower & Sharpen or Replace Blades
ฝัง
- เผยแพร่เมื่อ 16 พ.ค. 2019
- My Favorite Tool: amzn.to/2LQtH80
Common Lawn Mower Blades: amzn.to/2QhJbAB
21" Blade Set: amzn.to/2EqOCIL
Tools We Recommend: amzn.to/3Cssuwh
Here I explain the likely cause of a lawn mower that suddenly starts to shake while mowing. If you hit a rock or other foreign object the end of the mower blades can break off causing the blade to be out of balance which in turn shakes the mower deck and mower in general.
Thanks for watching and subscribing! As an Amazon affiliate I earn from qualifying purchases. Thank you for your support!
Was this video helpful to you? Send a tip:www.paypal.me/bensahlstrom
Become a Patron: / bensahlstrom
Blessings,
Ben
** Check out a demo of Housecall Pro here: www.housecallpro.com/ben **
My Favorite Tool: amzn.to/2LQtH80
Common Lawn Mower Blades: amzn.to/2QhJbAB
21" Blade Set: amzn.to/2EqOCIL
Hi Ben, This is Mary from VL! You are doing such a great job with your videos!! God bless, Mary
Thank you! You as well!
Thank you!
Love your videos, I would strongly suggest that one would remove all spark plug wires. Moving the blade you don't want the engine to start.
You can never be too cautious!
Ben I do lawn care. I sharpened my blade every week. I balance them every time I sharpen them
Nice! I should sharpen mine more often that's for sure!!!
@@BenjaminSahlstrom love your videos brother keep up the great work. Ben is it asking to much to give me a shout out about my TH-cam channel. Let me know
Nice video. My blades are pretty sharp, flat and balanced. My deck still shakes when engaged. It looks like it might be the belt. Is that possible?
Ok so question, my blades are fine, the mower is 1wk over a yr old. While mowing it started shaking, squealing, and shut off. This only happens when the PTO is engaged. Can you tell me just from that what the problem might be? Thanks. I pause halfway threw just to go check my blades.
I replaced the following and still have deck vibration which is worse with deck cutting height set on 5 and not as bad when set on 2..parts replaced, both idler pulleys, both spindles, both blades new and balanced, the blade belt itself...anyone??? motor has very little vibration. deck has a lot when blades are engaged. could my new belt be defective?
Tighten your belt… follow the engagement cable until it’s end, there will be an adjustment bar … loosen the nut( just enough to slide the bar) pull towards self to tighten.
Thank you!