Yeaaaaaa about that , I don’t find it as much fun going around . But ya my 350 kodiak will go to the same destination as my renegade , but it’s not going through the same holes .
When the Polaris bell to gets wet simply put the machine in neutral hold it at about 3000 RPM is for 3 or 4 minutes it will dry the belt and then drive out of the hole
Those are quite the machines. I have a 570 SPortsman with a 2' lift and 27s on it. I am on 100 acres here in ME. My mud is alot of clay though....sucks trying to wash it off. It sticks and leaves a permanent stain on the plastic. Great video guys! Enjoy the rides!
I was finally able to get a new ride to replace the RZR I had that I had to sell. I couldn’t a new RZR or anything fancy like these. All I oiled manage was a Sportsman 450. It at least gets me out of the house.
I got an 04 sportsman 500 recently, you're 450 is better in every way than my 500 lol There's nothing wrong with not having the biggest and baddest, nobody really cares. Go out, have fun and that's all that matters
Hell buddy all I got is a 86 Yamaha Moto 4 225 special edition that's been in the family since new, gets me outta the house and riding so I don't care. I get stuck a whole hellava lot but thats ok, thats what the winch is for lol
David Ash idk cuz I’m still driving a 86 Honda trx350 same year I was born still on the road today how many can am will be 34 years old and still running?
I love it when people compare a honda to a xxc or scrambler. A civic or corolla will last forever, but a mustang or corvette will be alot more fun to use. Ones a boring dependable machine, the other is a high performance that will give you alot more fun.
it would be interesting to see a 1000cc straight axle, bc straight axles just dont break, you would had to do something really stupud to break one. and with 1000cc it would turn big tires fine so you could put some big tires to give you the extra ground clearance. and if you wanted too imagine having a axle paddle on a can am
Smaller lighter machine. Less relax. Less drag. More traction. I’ve taken an 05 scrambler 500 with factory tires against a bombardier and grizzly with 24” superswampers and won every time. Ride the rear through and the front out. Less time. Less sink. Less stuck.
You know the way it sucks down when you try to pull or winch it in? I’m not a welder but if you make a telescoping square tube post that looks like an upside down “T” that is say 4 feet tall with a small wheel to allow the winch cable to ride on. Instead of sucking further down it gets that point higher than the winch it could helps pull up and out. At least in Theory. Could be a nice add to the tools while on long trails. All I ask is if it works and you start selling them hook me up with one. If it doe# real we’ll hook me up with a nice rig to match, Lol! Safe riding fellas!
Looks like someone dumped some Polaris eatin quick sand there on the trail! Interesting lesson to learn about crap in the wheels... Bumer for the Polaris dude, but a great video!
Deep hole there were obviously trying to fill in to access the lines, You could tell they were poking logs in to test its depth. very much like quick sand eh. Cheers.
omg love the conversations, you guys are so like me and my buddies. love the "eh's" like the hanson Brothers...old school hockey...just hit the throtlte eh.
I own both machines. Drama with both when pushing the limit. The rider of the Polaris was leading the pack. ( the Ginny pig). This could have happen to any of those machines. The Polaris ( lead driver) was driving like a cuteee pie. Hit the gas ang grow a pair and if you notice something wrong; investigate. Your buddies even mentioned prior to the machine breaking an axle..hit the gas and drive with your thumb. Yes the Honda is reliable and is good for the farm. I own the rubicon as well. Perfect for working and some fun, not to the point extreme of what the XMR OR THE HIGH LIFTER.
I have a high lifter put regular tires on it and tune it on a dyno. And race people with it. I think its one of the fastest drag bikes there is 0-50mph. Its a good trail bike in the north east u cant go over 50 on most of the trails you will die they are way to tight trees right next you. I have portals on my high lifter so i have to take them off too race its way to low with small tires on. Its a 160 percent gear reduction with portals. That is not a high lifter it is just a polaris with snorkles and tires. You need the internal gear reduction and the portal gear reduction.
That's a shit deal... but maybe if he would just let it rip that my not have happen. Big fan of you two guys... great video look forward to see the conclusion
My 05 Honda 500 foot shift, shaft drive would of made it there and back around you guys..... with me grabbing that back rack right the way though tho lol
I see y'all ride mostly can ams, I have 2 can ams was debating trading my 570 for something bigger. Debating between a sportsman highlifter or another xmr any reasons y'all don't ride polaris?
Lot of haters in the comments. Just so everyone knows, can ams break too. Yall acting like can am is invincible. If someone prefers polaris why you gotta bash on em? Fuck it's about going out with your buds and having fun. Everyone needs to stop with all the hate.
I got a 650 Suz, with about 3000 miles,and the frame is like me a little bent,would like to do something with the moter,any ideals, thought about in a boat of something,,let me no if you get a brain storm,,,gb
First of all, take the pin out of yr shackle & you could've put the pin through yr hook then, also you should have hooked the stuck 4 wheeler down low instead of so high, it would have pulled it upward instead of forcing it into the mud deeper, you may have gotten it out without breaking yr axle...
I had the exact same issue, was stuck in water up to the seat, got hauled out and found out the rocks tore the shit out of my rim, looks like someone took a can opener to the thing.
It also depends on how you ride Polaris and can-am both sit differently me I would choose Polaris it’s just what I want but at the same time I wouldn’t mind owning a renegade
My favorite part is the quad with the stock looking tires doin just fine :) Finding a way around is just as fun and twice as cheap!
Yeaaaaaa about that , I don’t find it as much fun going around . But ya my 350 kodiak will go to the same destination as my renegade , but it’s not going through the same holes .
When the Polaris bell to gets wet simply put the machine in neutral hold it at about 3000 RPM is for 3 or 4 minutes it will dry the belt and then drive out of the hole
Those are quite the machines. I have a 570 SPortsman with a 2' lift and 27s on it. I am on 100 acres here in ME. My mud is alot of clay though....sucks trying to wash it off. It sticks and leaves a permanent stain on the plastic. Great video guys! Enjoy the rides!
try tire shine on the plastic when done claenup.
it's great there in the USA, you have fun, I ask my dad about 5L of gas and you check what will break first FANTASITC
This is in Cloyne, Ontario. I’ve worked on those powerlines!
Bad day in the trails is better than a good day at work! Yall boys havin too much damn fun out there lol.
I was finally able to get a new ride to replace the RZR I had that I had to sell. I couldn’t a new RZR or anything fancy like these. All I oiled manage was a Sportsman 450. It at least gets me out of the house.
Nothing wrong with that my friend. Any quad is better then no quad.
i got a grizzly700 the other day, couldnt be happier. my wife has a sportsman 550. those little sportsmans go like snot.
I got an 04 sportsman 500 recently, you're 450 is better in every way than my 500 lol There's nothing wrong with not having the biggest and baddest, nobody really cares. Go out, have fun and that's all that matters
Hell buddy all I got is a 86 Yamaha Moto 4 225 special edition that's been in the family since new, gets me outta the house and riding so I don't care. I get stuck a whole hellava lot but thats ok, thats what the winch is for lol
TOOL intro! Can Am baby!! Love my Renegade Xxc
David Ash idk cuz I’m still driving a 86 Honda trx350 same year I was born still on the road today how many can am will be 34 years old and still running?
pitbull lover ...a lot of you just take care of them
I love it when people compare a honda to a xxc or scrambler. A civic or corolla will last forever, but a mustang or corvette will be alot more fun to use. Ones a boring dependable machine, the other is a high performance that will give you alot more fun.
Trying to watch you guys hook that winch into that tow ring was fricken hilarious.
Funny eh, Used to fit then I switched hooks. LOL
eh TV 🤣🤣
Awsome video man cheers from Finland
That's awesome, cheers
Man that was quite the adventure you boys had there. Too bad about your bros machine. Now we know who broke first! Thanks for sharing buddy!
it would be interesting to see a 1000cc straight axle, bc straight axles just dont break, you would had to do something really stupud to break one. and with 1000cc it would turn big tires fine so you could put some big tires to give you the extra ground clearance. and if you wanted too imagine having a axle paddle on a can am
Man, That's a tough break for the HighLifter. Still a Polaris fan>>>
Yeah was a shitty break for sure. Way she goes, eh. Sucks that it happen the first rip out with the tires and lift.
Can-Am, pulling broken Polaris out of the mud since always.
lol
Smaller lighter machine. Less relax. Less drag. More traction. I’ve taken an 05 scrambler 500 with factory tires against a bombardier and grizzly with 24” superswampers and won every time. Ride the rear through and the front out. Less time. Less sink. Less stuck.
Its always a Polaris being towed out of the woods for something!
you guys are the most canadian canadians i have ever heard
Hahaha, right on.
That's a very nice road and nice 4 wheelers thumps up
Quite the little spot eh.
eh TV yep
I had a rock break a wheel from inside. Aluminum bead-locks. Luckily it was bead-locks so I could finish :D
btw it was a Honda so it didn't have the power to break the axle
I'll post a pic of the axle for ya's on the community page, he also broke a hole in the rim. 750$ later sh'e good to go.
eh TV yikes, that sucks!
Crazy..crappy issue to have.
Just drive in it bud.. Well get you some then. Go on big man. Lets see it.
You know the way it sucks down when you try to pull or winch it in? I’m not a welder but if you make a telescoping square tube post that looks like an upside down “T” that is say 4 feet tall with a small wheel to allow the winch cable to ride on. Instead of sucking further down it gets that point higher than the winch it could helps pull up and out. At least in Theory. Could be a nice add to the tools while on long trails. All I ask is if it works and you start selling them hook me up with one. If it doe# real we’ll hook me up with a nice rig to match, Lol! Safe riding fellas!
Looks like someone dumped some Polaris eatin quick sand there on the trail! Interesting lesson to learn about crap in the wheels... Bumer for the Polaris dude, but a great video!
Deep hole there were obviously trying to fill in to access the lines, You could tell they were poking logs in to test its depth. very much like quick sand eh. Cheers.
Jdk
Faine
🏁🔧🔨🔩🏆
Jjuf
@@katarzynawilk8490 i
omg love the conversations, you guys are so like me and my buddies. love the "eh's" like the hanson Brothers...old school hockey...just hit the throtlte eh.
Hahaha, yup that's about the size of it eh.
REALLY COOL!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
I own both machines. Drama with both when pushing the limit. The rider of the Polaris was leading the pack. ( the Ginny pig). This could have happen to any of those machines. The Polaris ( lead driver) was driving like a cuteee pie. Hit the gas ang grow a pair and if you notice something wrong; investigate. Your buddies even mentioned prior to the machine breaking an axle..hit the gas and drive with your thumb. Yes the Honda is reliable and is good for the farm. I own the rubicon as well. Perfect for working and some fun, not to the point extreme of what the XMR OR THE HIGH LIFTER.
Strange area. I don't think that's the best material to build a road through swampy ground. Shame about the Polaris. Anyhow, nice vid and thumbs up.
I agree big crush rock would be much better. Quick sand is all they acomplished.
I see the NOS atvs ı love you eh TV
It dont have snorkel and engine never stalls lol
How engine dont stalls you dont have snorkel???
Ước j có chiếc xe như này để đi câu cá, vượt mọi địa hình thì vui biết bao nhiêu
Can't wait to see him turn it loose on the Polaris
It's getting another upgrade this week that will help release some of that power it's holding back. Stay tuned
eh TV man I hope he does the pinion upgrade if he hasn't
Nicholas Smith the 18 models have an upgraded pinion plate
Calisthenics & Lifestyle even the 850 highlifters?
LSX Vette every Polaris atv got one
Stick the cable in and then lock it with the hook boys!
"he's just scared ehh"
Ima canam fan ,, nice to see the Polaris first to go 😆
Good to see
STV: Some Terrain Vehicle
Awesome video it just looked like crunchy peanut butter LOL definitely some rough riding conditions
Concrete texture and large stones.
Polaris no good. Great video man!
Thanks!
I remember back when you had 6K subscribers
Right on, thx for the support eh
hi please the atv you ave is the best i wish i had 1 like your know
Muy bueno estas máquinas
Yo quiero una.😊😊
carlos macas se chigan muy prounto es mejor Yamaha y honda
That waz painful 2watch,
Made ne wanna scratch my eyes out! SumPeoplesKids🇺🇸merica🇺🇸
How did you get that thing out of there since you had to go through alot of holes and he only had 3 wheel drive.
Easy
I have a high lifter put regular tires on it and tune it on a dyno. And race people with it. I think its one of the fastest drag bikes there is 0-50mph. Its a good trail bike in the north east u cant go over 50 on most of the trails you will die they are way to tight trees right next you. I have portals on my high lifter so i have to take them off too race its way to low with small tires on. Its a 160 percent gear reduction with portals. That is not a high lifter it is just a polaris with snorkles and tires. You need the internal gear reduction and the portal gear reduction.
Wow eh. That aboat crazy eh
Man those quads are the shit
Can am in simply a way more durable brand and last longer. Polaris uses cheap parts but still have nice Atvs out there.
I had a can am and I was fixing it more than I was riding
They both seem to need a lot of maintenance. all that horsepower and weight is hard on components that size. The side by sides are even worse
my scrambler has over 5500km on it now and ive only ever done regular maintenance
That's Polarious!
Hahaha
@@ehTV1000 yeah un french is a Polarisque lol
That's a shit deal... but maybe if he would just let it rip that my not have happen. Big fan of you two guys... great video look forward to see the conclusion
Thx buddy, bum luck was the factor on this one. But when he breaks ligitiment, We'll feed it to him eh. Hahahahaha
Should've had a Renegade! You tell him Job lol. What are Brothers for? Lol
Hahaha, Got to give him a hard time eh. What are brothers for. LOL
Playing with the big boys isnt cheap lol
No sir
What do u use to record, the sound quality is incredible
We use the Hero 5 black's with double layerd audio from both cams.
eh TV I think he was being sarcastic
Lmfao.... I am a nice guy....I won't soak em.... fuck it smells like piss... fuck!!! Classic. Awesome video. Crazy action. Thanks for sharing
Iv winched out a highlifter at the atv park same thing locked up rear wheel. we found a rock in the brake rotor
I recall that, seems to be a regular issue. Must be the deep dish rims.
That sucks tough break. I had a Polaris not long ago had major problems with axels. Maybe some turner axels will help.
Or Demons
Haven't watched the video yet but can am
Haha, wrong
Lol the real boys Honda boys don't have "belt" issues
Recore el país entero
Hail honda
Sean Khan gghhfjiiiiiii
You know what’s good #HONDA
My Honda 300 can do just as much or better. Suck it two time and still runs like a champ
Keep the videos going
Damn I’d rather be on 28’s-30’s get stuck a couple more times than to break stuff out in the trail and the middle of the ride
LexusLowLife 305 ya I run 28” Sedona Mudder In Laws they are a great aggressive tire that rides hard trail pretty well still
Hxfi.
My 05 Honda 500 foot shift, shaft drive would of made it there and back around you guys..... with me grabbing that back rack right the way though tho lol
If the leader had gone around the holes the first time then there wouldn't have been a problem.
Not so much fun though.
Have to take the bad with the good
How much do these costs?
Happens to everyone 🤷🏽♂️
Sure does, glad it wasn't me this time.
In jjhb de dnn
Tough break Troy! it looked like brown cement!
Bigger stones though. Hahaha
Good lunch time ham sandwich and. Ehhhhhh tv video lol
Hahaha, right on buddy
How many cost of it is and from where you have buy it
would you look at that, a broken polaris. what are the chances....
I see y'all ride mostly can ams, I have 2 can ams was debating trading my 570 for something bigger. Debating between a sportsman highlifter or another xmr any reasons y'all don't ride polaris?
Some of us do, Been more and more Polaris's joining the fleet in the last yr. I prefer the power delivery of the Can Am my self. But both are wicked.
EH TV what's the next up grade your thinking about?.... Love the videos!
ECU reflash
Egegdfhwfbdb hftsfo9yf
Ggssgmgert nie dcvs
Tgbvcfg cfh+knbgy6
I might be getting a 1000 cc forweller If I dont get that then its probably going to be 800 or 600 cc on a diffrent one also its going go be a Polaris
Put rhino axles and a cecco racing pinion cover on the polaris and send it
Lot of haters in the comments. Just so everyone knows, can ams break too. Yall acting like can am is invincible. If someone prefers polaris why you gotta bash on em? Fuck it's about going out with your buds and having fun. Everyone needs to stop with all the hate.
I got a 650 Suz, with about 3000 miles,and the frame is like me a little bent,would like to do something with the moter,any ideals, thought about in a boat of something,,let me no if you get a brain storm,,,gb
Super!
should have bought Cecco racing pinion cover. should have been the first upgrade before those tires
xXJBrutalXx 2018 come with a steel pinion plate upgrade on it
Good product, but yeah this model is supposed to had upgraded it.
broken axle!? GOT DAMN
And this is why I ride canned ham
😂😂😂😂😂😂😂😂😂
Colton Winkel this is why I don’t trust people with can ams
He should have got a can am!
Can am C stands for Can . a stands for am .n stands for needs . a stands for a . m stands for mechanic. Can am needs a mechanic .
First of all, take the pin out of yr shackle & you could've put the pin through yr hook then, also you should have hooked the stuck 4 wheeler down low instead of so high, it would have pulled it upward instead of forcing it into the mud deeper, you may have gotten it out without breaking yr axle...
Big rock lodge between rim and caliper. Couldn't see it until after the fact. Many things were tweaked. Shhht happens, eh.
What do you y’all use to clean the bikes?
Lots of scrubing
We’re in ol Canada, eh?
No place like home, Ont
Hello #Brazil #EUA
I'm from Brazil most love the US its channel and top brother can calls in Watssapp +55 (62) 9147-8405
Hey what mods have you done to yours I want to wake mines up a little.
Watch the latest upload on the channel, It covers all the add-on's.
my best quad bike i wish to have one
Between 13:30 and 15:00 guy filming and talking sounded like Chris Farley to me.
Lol, love that dude I do
Great video
Thx Amber
Me *reads the title* yeah the Polaris 100%
Nice video!
Thx man
Hate to see that happen....I understand it’s part of riding.....still sucks....thanks for another
No worries he'll get plenty of chances to show what that beast can chew.
That's what you get for buying a Polaris can am is the way to go 😂😂😂😂
I see Murphy made a trip with that guy
11:00 you can hear it
muy bueno el vídeo !
Man I wonder if theses guys are Canadian? 😂😂😂
Chrissy D that is what I was thinking (A)
I am Canadian
Like the car that u have.
Yes they are the lisence plate says ontario
eh?
Where is this
Stand on the right floor board.
I have a question, how many miles per hour can you go with a 4 wheeler?
That depends on the type of fourwheeler. That’s an incredibly broad question
I had the exact same issue, was stuck in water up to the seat, got hauled out and found out the rocks tore the shit out of my rim, looks like someone took a can opener to the thing.
Same thing here, he destoyed the rim also.
Anyone else think the thing floating in the water in the sec puddle was a alligator
Do a walk around of the popo and the triple black one
Sure, when the moment presents itself I will.
It’s really how you drive the quad he just had a bad day I bet give me the Polaris or the can-am and I would break it
It also depends on how you ride Polaris and can-am both sit differently me I would choose Polaris it’s just what I want but at the same time I wouldn’t mind owning a renegade
Your right, some bum luck. and yeah there all nice machines.