Minn Kota Trolling Motor Rebuild
ฝัง
- เผยแพร่เมื่อ 25 ส.ค. 2024
- Rebuilding a Minn Kota Terrova trolling motor. My trolling motor recently got water in it and quit. I purchased a rebuild kit from Lakeside Marine online and got it up and running again. I replaced the seals, armature, brushes, and bearings. #minnkota #repairs #trollingmotor
I will be doing this tonight and tommorrow- thanks for the helpful video
You’re welcome! I hope it helps. Good luck with the project!
Thanks for sharing, I'm sure there's plenty of people who needed this!
Thanks for watching!
Super helpful, thank you!
Glad it helped out!
Thank you!
You’re welcome!
When you need a hammer - the nearest tool becomes a hammer! Thanks for the walkthrough.
😂 fact!
Dish wishing machine or man?
That cardboard tube is supposed to hold the brushes back while you slot the armature into place.
That’s good to know!
My Ulterra did the same thing, the long thru bolts were loose from factory
That’s no good at all! I hope the warranty took care of yours!
I had same problem. Gasket failed after 5 years.
Yep. I think mine went about 6-7 years. It probably would have been smart to change out the seals at some point but I didn’t lol. Then there’s always getting braid wrapped up in there that will blow the seals
Can you add what exactly you ordered?
I didn’t hang onto the exact part numbers but they came from Lakeside Marine. I ordered armature, brushes, and seal kit. Each of those were separate. They need your serial number to get the exact parts since parts vary based on years but it’s super easy. I went through the chat on their website and they gave me links to exactly what I needed. Or you can call them and get the same info.
Thanks!
You bet!