How to Install & Deploy Red Hat Openshift | K21 Academy
ฝัง
- เผยแพร่เมื่อ 2 ก.ค. 2024
- 💼Join our free Kubernetes class to build your career, get certified, and land a high-paying job in Kubernetes: bit.ly/3X4PiMO
------------
🌐 Blog on Red Hat OpenShift: bit.ly/3X2fisd
------------
📞 Need Career Guidance or Cloud Certifications? Apply to Work with Us: bit.ly/3V5r96q
------------
🚀If you're new to the cloud and want to build a strong foundation in cloud technology, join our Skool Community: bit.ly/3vFBcX7
------------
📩 Join 2,05,000+ Learning How To Scale Cloud/AI/Data Career By Subscribing For Free To The “Cloud/AI/Data Newsletter": bit.ly/4bTGRbe
------------
OpenShift is a platform from Redhat/IBM to run containerized applications. It is a Platform as a Service (PaaS) used for fast deployment of cloud applications, development workflows management, automates the installation, and enhances the DevOps process.
📌 OKD ⯮ is an open-source, community edition of Red Hat's OpenShift container management and orchestration platform based on Docker 🐋 and Kubernetes.
📌 OCP ⯮ OpenShif Container Platform, an enterprise edition, is a consistent hybrid cloud foundation for building and scaling containerized applications.
There are two ways in which we can deploy it on OCP
⚫ Managed OpenShift
⚫ UnManaged OpenShift (Do it Yourself)
📚 Theoretical knowledge is good, but until and unless you perform yourself, you won't learn things. Therefore, we have specially prepared step-by-step instructions on installing and deploying OpenShift to provide you with every minute detail.
You will learn the two most important things in this video that are:
➥Various Option of OpenShift Installation
➥Deployment of OpenShift Cluster on AWS
Want to know more about 𝐎𝐩𝐞𝐧𝐒𝐡𝐢𝐟𝐭
𝐓𝐡𝐞𝐧 𝐡𝐞𝐚𝐝 𝐭𝐨 𝐭𝐡𝐞 𝐯𝐢𝐝𝐞𝐨 𝐛𝐲 𝐜𝐥𝐢𝐜𝐤 𝐡𝐞𝐫𝐞 👇
• How to Install & Deplo...
𝐖𝐡𝐞𝐫𝐞 𝐡𝐞 𝐄𝐱𝐩𝐥𝐚𝐢𝐧𝐬 :
00:00 = Introduction
03:19 = Agenda
16:04 = Prerequisite
17:18 = RedHat Developer Account
22:37 = Register a Domain Name
24:51 = Register DNS Entries for NameServer
36:15 = Launching a Linux Instance Using EC2
55:26 = Install & Configure AWS CLI on Linux
01:07:04 = Setup OpenShift Cluster
01:26:55 = Logging into Cluster
01:37:12 = Delete OpenShift Cluster
01:42:52 = Summary/Recap
01:45:13 = FREE CLASS on OpenShift
01:45:32 = Learning Path for OpenShift Certification
01:45:12 = Registration Link for FREE CLASS
𝐂𝐡𝐞𝐜𝐤 𝐨𝐮𝐭 𝐭𝐡𝐢𝐬 𝐛𝐥𝐨𝐠 𝐰𝐡𝐢𝐜𝐡 𝐜𝐨𝐯𝐞𝐫𝐬 𝐞𝐯𝐞𝐫𝐲𝐭𝐡𝐢𝐧𝐠 𝐢𝐧 𝐝𝐞𝐭𝐚𝐢𝐥 - bit.ly/3l7u3GL
Do you have questions? Let us know in the comment section 👇
𝐉𝐨𝐢𝐧 𝐨𝐮𝐫 𝐅𝐑𝐄𝐄 𝐓𝐞𝐥𝐞𝐠𝐫𝐚𝐦 𝐠𝐫𝐨𝐮𝐩: t.me/k21dockerkubernetes 𝐚𝐧𝐝 𝐠𝐞𝐭 𝐦𝐨𝐫𝐞 𝐢𝐧𝐬𝐢𝐠𝐡𝐭𝐬
#openshiftdeployment #openshiftinstallation #openshiftcontainerplatform #openshiftmanagedkubernetes #openshiftinstallationtutorial #openshiftforbeginners #openshifttutorial #redhat #openshift #redhatopenshift #devopsopenshift #openshiftcertification #k21academy #askatul
Subscribe if you want to know more about Cloud technology: k21academy.com/youtube
---------------------------------------------------------------------------------------------------------------
LET'S CONNECT ON SOCIAL ↴
➽ Facebook: k21academy.com/Facebook
➽ Linkedin:k21academy.com/linkedin
➽ Twitter: k21academy.com/twitter
➽ Instagram: k21academy.com/instagram
See you soon! - วิทยาศาสตร์และเทคโนโลยี
💼Join our free Kubernetes class to build your career, get certified, and land a high-paying job in Kubernetes: bit.ly/3X4PiMO
Awesome and very direct tutorial. The only thing I did was specified 3 zones since now us-east-2 now has more than 5 AZs.
You have done a great job. Very nicely covered and explained.
Hi Shubhang, you can also register for our FREE CLASS On OpenShift for Beginners What, Why & How ?
Check here: bit.ly/3fx2mqp
Thanks, keep watching!
Nicely Described. Thanks
Hi, thanks! Keep watching!
Excellent tutorial 👌
Thanks, keep watching!
Excellent Tutorial
Thanks, keep watching!
really awsome
Glad you think so!
Good
Thanks
Excellent tutorial, I managed to do everything. Much appreciated.
I would only need to be able to connect to the nodes of the Cluster, (master, worker to install a third-party monitoring system, but it does not work for me "The instance does not have a public IPv4 address
To connect using the browser-based client for the EC2 instance connection, the instance must have a public IPv4 address. "
Can you help me please.
To connect to the nodes of your cluster, you'll need to assign a public IPv4 address to your instances. Here's how you can do that:
1. Go to the Elastic IPs section under Network & Security in the EC2 Dashboard.
2. Click on Allocate Elastic IP address.
3. Once allocated, select the new Elastic IP and click on Actions > Associate Elastic IP address.
4. Associate the Elastic IP with your instance.
I love it, is there video for local laptop installations over windows 10?
Hello, I am trying to deploy the cluster on AWS but encountered this error "INFO Creating infrastructure resources...
ERROR failed to fetch Cluster: failed to generate asset "Cluster": failure applying terraform for "cluster" stage: failed to create cluster: failed to apply Terraform: signal: killed"
Any help on this?
While OpenShift cluster is being provisioned it uses terraform file for cluster creation in backend. Where does this terraform is stored
Hi Hidayath,
Hope you are doing good.
When we setup a openshift cluster using Terraform, the terraform files will be stored inside the same Openshift directory as it stores the installer files usually.
Thanks & Regards
Sahid
Team K21
Can u share the notes files
Thank you very much for this wonderful video , could you please help me with one resolution ? when i modify the install-config.yaml. file and when i hit the create cluster command , the file disappears and throw me an error of quota of EC2 - saying requested quota is 8 and eligible is 5. i am damn sure about the replica which set to 1 . could you please help me with the resolution?
i also make this mistake, did you fix it?
Hi Nirav,
This is due to the less number of quota. You can either use a pay as you go account or try requesting quota increase.
Please go to the below url to raise a quota limit increase request:
docs.aws.amazon.com/servicequotas/latest/userguide/request-quota-increase.html
Thanks & regards
Team K21
I tried this install and I am getting the "Platform Quota Check" error. I checked and reverified the verify and I definitely have us-east-2 choosen. Anyone know how I can resolve this error INFO Consuming Install Config from target directory
WARNING Discarding the Kubeconfig Admin Client that was provided in the target directory because its dependencies are dirty and it needs to be regenerated
FATAL failed to fetch Cluster: failed to fetch dependency of "Cluster": failed to generate asset "Platform Quota Check": error(MissingQuota): ec2/L-1216C47A is not available in us-east-2 because the required number of resources (12) is more than the limit of 5. Thanks in advance
FATAL failed to fetch Cluster: failed to fetch dependency of "Cluster": failed to generate asset "Platform Quota Check": error(MissingQuota): ec2/L-1216C47A is not available in us-east-2 because the required number of resources (24) is more than the limit of 5
Hi there,
This is due to the less number of quota. You can either use a pay as you go account or try requesting quota increase.
Please go to the below url to raise a quota limit increase request:
docs.aws.amazon.com/servicequotas/latest/userguide/request-quota-increase.html
Thanks & regards
Team K21
@empyrean-sm4qx there's a limitation with your EC2 instance quota in the us-east-2 region. The cluster you're trying to create requires 24 resources, which exceeds the limit of 5 resources set by your quota.
freenom is not working is there any other alternate
Yes you can use dns provider line godaddy for same.
Can you please share this pdf file .
Apologies but these files are for our premium users only.
I have successfully deployed openshift in existing VPC with a single user and restricted permission. If any one need help, ping me.
Hurray!
Great work Shubhadip.
Hi subhadip we tried creating cluster but my installation stuck at "INFO Creating infrastructure resources..." since last 50 minutes. Also i am facing several warnings like
"INFO Credentials loaded from the "default" profile in file "/root/.aws/credentials"
WARNING failed to find default instance type: no instance type found for the zone constraint
WARNING failed to find default instance type for worker pool: no instance type found for the zone constraint
INFO Consuming Install Config from target directory
WARNING Following quotas ec2/L-0263D0A3 (us-east-1) are available but will be completely used pretty soon.
INFO Creating infrastructure resources..."
Can u suggest something.
Are you sure this is UPI ? or was it IPI ?
It is IPI because installer provisioned :P
Its UPI
This is IPI installation, seriously I've wasted my 1.5 hours
Hi @K21Academy, we tried creating cluster but my installation stuck at "INFO Creating infrastructure resources..." since last 50 minutes. Also i am facing several warnings like
"INFO Credentials loaded from the "default" profile in file "/root/.aws/credentials"
WARNING failed to find default instance type: no instance type found for the zone constraint
WARNING failed to find default instance type for worker pool: no instance type found for the zone constraint
INFO Consuming Install Config from target directory
WARNING Following quotas ec2/L-0263D0A3 (us-east-1) are available but will be completely used pretty soon.
INFO Creating infrastructure resources..."
Can u suggest something.
Ensure that the AWS credentials used for creating the cluster have the necessary permissions and are correctly configured. Try # aws configure and try to give correct information required.