Re: snow, I'm pretty sure we hit the 20" mark in the Ellsworth Me area. I ended up plowing/clearing all my stops twice during this storm. What's the flange to flange measurement on the 8-3/4? I have a 57 chevy project that I've been planning on swapping the axle out of.
www.ebay.com/itm/Traction-Bars-for-Plymouth-Barracuda-1964-1969-for-Duster-1970-1977-/255084194254?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l49286&mkrid=711-127632-2357-0 Thanks for watching!
It’s been cold here in mid Michigan but very little snow….I’m ready for spring lol..
love the lathe/ tube notcher idea. i never saw a need for a lathe milling attachment when i have a mill.... now i guess i need one!
The mill can notch tuning as well.
Those lined hose clamps is all that I use.
We got a little snow from that storm in stokesdale NC
Re: snow, I'm pretty sure we hit the 20" mark in the Ellsworth Me area. I ended up plowing/clearing all my stops twice during this storm. What's the flange to flange measurement on the 8-3/4? I have a 57 chevy project that I've been planning on swapping the axle out of.
Should be 57.5” in the Dart, 57 Chevy is 60”. So it would narrow it 1.25” per side, might be perfect.
Do you have a link to the traction bars you purchased? Love the channel by the way.
www.ebay.com/itm/Traction-Bars-for-Plymouth-Barracuda-1964-1969-for-Duster-1970-1977-/255084194254?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l49286&mkrid=711-127632-2357-0
Thanks for watching!
👍👍👍
I have a 64 dart 225 GT. Was going to put a 56 DeSoto Hemi in it. Any thoughts and ideas would be appreciated
👍