I loved it. I scanned my Honda Odyssey 2012 which did not have any warning lights on and guess what I found 5 conditions on my vehicle. I did scanned my daughter vehicle and even did not have warning lights on, found 36 conditions on her vehicle. It is a great scanner. The best thing is you do not have to pay for updates. The updates are free and easy to do it. Also it is a easy to use and to scan any vehicle.
I bought it and scanned my Honda Odysey 2012 and found 5 conditions on it. It did scanned the whole vehicle. It is an excellent scanner. It worth a single penny!!! I should buy it earlier.
I cant get my to update, its registered, but maybe you can put a step by step vid on this one. The one thing that sucks about foxwell is no u s support number to call. I had it plugged in to usb for over 2 hours several times and it says update in progress, but i dont see any progress. Im at the point wondering why they dont come updated as my newest vehicle is 2015. Im thinking foxwell may have been a Bad Choice.
Excellent review, was just getting ready to buy one of these until I went to Amazon and started reading some of the one & two star reviews (there is a # load of them BTW) The 13% one stars is what concerned me the most... Here are a few of them: "Can’t register the product. Can’t contact manufacturer. Can’t update software. Product is very unstable. Freezes. Product does NOT do many of the functions that it states it does." EDIT: I did notice that there are a few sellers on eBay selling huge amounts of these things, one in fact has almost 800 sales (ancel-tool). I wonder if all the 1 star reviews is just because there are so many buying these...
I'm not sure, but I can tell you that hasn't been my experience. Registration on the Foxwell site took maybe 3 minutes. There is an email on the site, but I never tried using it so I can't comment on that, and I've filmed a part 2 where I show the update procedure. That part does take some time the first go around as there are a LOT of updates. It took almost an hour, but it brought everything up to current. This month when I did an update there were only maybe 6 or 7 makes that needed updates and it went a lot faster. I've been using it nearly daily here and while it's not quite pro-level, its pretty close. For the price it's a fraction of the next step up so I think it's worth it, especially since the updates are free.
When i go in maintrance it cames epb and oilreset when i go in oil reset it comes the same program at diagnostic why?i must do an update?or is the car the problem bmw x3 3.0 2004
Me:: I’ll definitely be reading that tonight (paperwork) Later that night-“honey have you seen that paperwork ?” Her:yes ,, wherever you put it last Dallas Me: I guess I’m not reading that paperwork after all 😂😂
I loved it. I scanned my Honda Odyssey 2012 which did not have any warning lights on and guess what I found 5 conditions on my vehicle. I did scanned my daughter vehicle and even did not have warning lights on, found 36 conditions on her vehicle. It is a great scanner. The best thing is you do not have to pay for updates. The updates are free and easy to do it. Also it is a easy to use and to scan any vehicle.
Great review and video as always... Great live shows last night also! Always enjoy. Take care
Much appreciated
I bought it and scanned my Honda Odysey 2012 and found 5 conditions on it. It did scanned the whole vehicle. It is an excellent scanner. It worth a single penny!!! I should buy it earlier.
It shows conditions even the warning lights are off. It is excellent to use it when buy a new or used cars!!!
What do I like it is you do not have to pay for updates. All updates are free. Easy to use and to update it.
Thanks and look forward to the other vids on this tool
More to come!
Hi, really enjoyed your video but could you let me know if this will bleed the abs pump after a brake fluid change? Graham
*NO*
Yes it will
GRAHAM LONGLEY Dose it or na
Do you need to charge these up beforehand to make them light up?
I would charge it fully before using-
I cant get my to update, its registered, but maybe you can put a step by step vid on this one. The one thing that sucks about foxwell is no u s support number to call. I had it plugged in to usb for over 2 hours several times and it says update in progress, but i dont see any progress. Im at the point wondering why they dont come updated as my newest vehicle is 2015. Im thinking foxwell may have been a Bad Choice.
I have a 2017 Nissan Rogue with no key, just push start. how do I turn ignition on but not start the engine??
Everyone should have one scanner to scan your car!!!
Great Video can you tell me if this will do real time wheel speed sensor readout on all 4 sensors at the same time?
Eric do another update down the road and let us know after some use
I'm going to make a 3 part series of this one, I already filmed the software update video and I'll make an "Advanced features" video down the road.
What will happen if my car model is not available in that foxwell scanner ?
Excellent review, was just getting ready to buy one of these until I went to Amazon and started reading some of the one & two star reviews (there is a # load of them BTW) The 13% one stars is what concerned me the most... Here are a few of them: "Can’t register the product. Can’t contact manufacturer. Can’t update software. Product is very unstable. Freezes. Product does NOT do many of the functions that it states it does."
EDIT: I did notice that there are a few sellers on eBay selling huge amounts of these things, one in fact has almost 800 sales (ancel-tool). I wonder if all the 1 star reviews is just because there are so many buying these...
I'm not sure, but I can tell you that hasn't been my experience. Registration on the Foxwell site took maybe 3 minutes. There is an email on the site, but I never tried using it so I can't comment on that, and I've filmed a part 2 where I show the update procedure. That part does take some time the first go around as there are a LOT of updates. It took almost an hour, but it brought everything up to current. This month when I did an update there were only maybe 6 or 7 makes that needed updates and it went a lot faster.
I've been using it nearly daily here and while it's not quite pro-level, its pretty close. For the price it's a fraction of the next step up so I think it's worth it, especially since the updates are free.
This scanner work with the problem of the catalic system? Is one Bad ir semi bad, something like thas.
Hi good scanner does it have test mode 6 and evap test ?
thank you so much for your share
does it do dpf regens and if so how?
When i go in maintrance it cames epb and oilreset when i go in oil reset it comes the same program at diagnostic why?i must do an update?or is the car the problem bmw x3 3.0 2004
It may need an update. I haven't tested mine on any BMW's yet.
Can you see each cylinder and spark voltage
Does this support 08 Buick lacrosse? The ancel x6 and nexpeak k1 don't I have a vident ilink 400 with gm software but I want a different scanner
Welcme does it work on santa fe diesel 2003 and adove please help
Can u show how to reset the vehicle's idle?
Im sorry, I can only show what a customer needs.
does it program the tpms like the manual says it can?
Can it relearn idle
does it support 24v system?
Hey man how you turn it off and on
Hey Eric I live in sc and I'm hearing alot of chatter on the cb from Chicago is there any way you can hop on channel 37 and see if I can get a copy
Sorry I've been out on the property working all day. Maybe next time!
Me:: I’ll definitely be reading that tonight (paperwork)
Later that night-“honey have you seen that paperwork ?”
Her:yes ,, wherever you put it last Dallas
Me: I guess I’m not reading that paperwork after all 😂😂
😕
Hey Eric, what was the time frame on your updateing???
I finally found the Fox Assist to do the download. I am just at 50%, will wait until I gett 100%...
Does it scan bcm and pdc sensors
Hello, I appreciate your video details. Can I use this to code Toyota injectors?
No sir
Can this tool Srs crash data reset?
Yes.
Does it offer throttle body relearn??
No
How much does this unit cost and what does it cost to update?
Updates on this unit are free for life! That was one of the deciding factors on purchasing the unit.
@@FarpointFarms how much does it cost?
After a basic search on the Internet, it looks like around $200 depending on what model you purchase.
@@brvfd822 I paid $249 for it on Amazon.
I cannot find part 2 or part 3 for this tool?
I will post part 2 next Wednesday. It shows the update process.
@@FarpointFarms Thank-you, I had mine plugged into my computer over 2 hrs. and still was not done??
Was wondering do you have to format the card?
@@FarpointFarms Did you get part 2 posted????
What is the price ranges
I paid $249.00 for it on Amazon
Wheres part 2.........
th-cam.com/video/beaYPSD3SP4/w-d-xo.html
Foxwell is a horrible company. Buyer beware!