The rear shock layed down angle on these indian scouts are a bad design putting the shocks under greater pressure with less travel making them difficult to get decent suspension. The critical measurement for the stock shocks of 275 mm eye to eye must be measured with the load its intended to carry including yourself on it and adjusted a turn at a time on each side making the turns equal. I would find a couple of dome nuts that fit in the dimples in the shock bolts and drill a couple of holes in a flat bar 275mm apart and bolt them in, this tool would make this process easier. What you are trying to achive is to put enought pressure in the springs to not bottom out on the rubber buffer and jar your back but not too much pressure that there is no suspension. I hope this helps.
It is middle of the bolt for measurement, and 278 mm in between with load.
278mm is 10.9 inches, top of bolt to top of bolt is no different than middle to middle.
@@ssquaredcustomz8406I’m just quoting what it says in my 2022 Rogue manual
Thanks for posting
Best adjustment success I had with my Rogue was to put the stock shocks in the box that my Progressive 444's came in LOL.
I need to just bite the bullet and buy some.
My '24 rogue came with the shock wrench. (Indian knows ya gonna adjust them lol)
The rear shock layed down angle on these indian scouts are a bad design putting the shocks under greater pressure with less travel making them difficult to get decent suspension. The critical measurement for the stock shocks of 275 mm eye to eye must be measured with the load its intended to carry including yourself on it and adjusted a turn at a time on each side making the turns equal. I would find a couple of dome nuts that fit in the dimples in the shock bolts and drill a couple of holes in a flat bar 275mm apart and bolt them in, this tool would make this process easier. What you are trying to achive is to put enought pressure in the springs to not bottom out on the rubber buffer and jar your back but not too much pressure that there is no suspension. I hope this helps.
What kind of seat is that one?
cc riders seat, very hard and do not recommend lol
She’s ready for jumps now
Lmfao not happening
It’s backwards, you needed to pre-load them more. Shocks down, not up.
So I’m guessing you can’t take me for a ride? 😅
😂😂😂 it'd be a rough ride
@@ssquaredcustomz8406 🤣