Another washing machine left on the kerb: Test wash: all the lights flashing: Indesit IWDC6125

แชร์
ฝัง
  • เผยแพร่เมื่อ 7 พ.ย. 2024

ความคิดเห็น • 107

  • @charlesmaxwell9509
    @charlesmaxwell9509 ปีที่แล้ว +2

    I really like the flashing lights feature my Indesit sucked something into the pump and drain was lit up so was able to know immidiatly what was up unlike my previous machine

  • @RadioBirder
    @RadioBirder 2 ปีที่แล้ว +10

    I had that problem yesterday 01/03/2022 with an Indesit washing machine, all leds flashing and found an emery board (nail file) stuck in the pump jamming it up, removed it and everything ran as normal on restarting. So check that the pump isn't jammed.

  • @Inthewash45
    @Inthewash45 2 หลายเดือนก่อน +3

    And there is a tab at the long hatch at the bottom of the machine, you can pull the green tab and the door will
    Immediately release.

  • @rwnfernando
    @rwnfernando หลายเดือนก่อน

    I've got one yesterday, similar problem. When tested dryer filament has failed. Replaced it.
    It's working fine. This machine has been running for the last 6 years. Good workhorse.
    This flashing lights are a common error indicator.
    Try to check:
    1. Filter blockage
    2. Motor brushes
    3. Drum temperature sensor
    4. Dryer Temp. sensor
    5. Dryer fan
    6. Dryer heater element
    7. Door interlock
    All these above are easier.
    to test.
    Check the power supply cables coming to the door switch and to the dryer heater element. As these are not the best cables, insulation near the connector melts and may fail.
    If none of above are the case.,
    Then it could be either the power board or the controller board.
    NB:
    Please ensure power is off before you open the lid.
    And, after disconnecting from mains, press the power button again (to discharge the power board capacitors)

  • @garethprice7256
    @garethprice7256 2 ปีที่แล้ว +4

    I'm having the same issue as you as I put it on rinse but its just spinning with more water its wired

  • @seansmith8263
    @seansmith8263 ปีที่แล้ว +2

    Did you fix it. Mine is doing exaclty rhe same thing

  • @nestorplattner9524
    @nestorplattner9524 ปีที่แล้ว +3

    you must replace electrolitic capacitors 680uf, 100uf, 470uf in te main board

  • @theoddjobcentre6686
    @theoddjobcentre6686 2 ปีที่แล้ว +2

    Grandma's flashed for 6 years she had it for 12 years but it still worked fine it's something to do with one of the boards plenty of videos on TH-cam on how to fix it it's quite simple

  • @The_Laundry_Enthusiast
    @The_Laundry_Enthusiast 2 ปีที่แล้ว +3

    Just a error code, could be motor however unplug it for a bit then try again

  • @jimjones8527
    @jimjones8527 ปีที่แล้ว +1

    check for bulging capacitors on the the control module at the bottom of the machine, it's to the bottom left hand side, it's the main control board.

    • @stephenifeoluwa8267
      @stephenifeoluwa8267 10 หลายเดือนก่อน

      How will I identify the burlging capacitor

    • @andresilvasophisma
      @andresilvasophisma 8 หลายเดือนก่อน

      @@stephenifeoluwa8267It looks swollen (bulging).

  • @aidanwalsh2545
    @aidanwalsh2545 2 ปีที่แล้ว +1

    I have one, it's doing somethings similar, but without the water heating up, so I'm thinking in my case it is the element. Wish me luck.

  • @mielekid.w1613
    @mielekid.w1613 2 ปีที่แล้ว +2

    For some reason it was using the dryer fan. Which probably means that it was either thinking it was using the drying fan Or it was using the drying can. But pcb seems faulty

  • @balfie18
    @balfie18 2 หลายเดือนก่อน

    For anyone sees this video and wonders what's going on, the machine is indicating F05 which is it's unable to drain or pump. Check the pump filter for blockages. The fan in a washer dryer will turn on in F05 mode, it's normal. If pump filter is not blocked chances are the sump is blocked with something. All lights flash when in error mode, and a multiple of lights will stay on. Them lights that stay on read an error code.

    • @Catalin_C97
      @Catalin_C97 หลายเดือนก่อน

      I ended up replacing the 25W drain pump that it came with with a stronger 45W one and it never gave me any errors after that.
      Where I live the mains voltage sags down quite a bit during the day and that reduced the pumping power of that weak 25W drain pump and it couldn't evacuate the water. I've never had problems after I replaced the pump with the stronger 45W one.

  • @AnaViolinViola
    @AnaViolinViola 2 ปีที่แล้ว +2

    Sunshine means drying...we inherited this exact model from a previous owner and it's too complicated to handle

  • @Hisense_lad
    @Hisense_lad 2 ปีที่แล้ว +2

    All flashing lights is a drain error as on on my indesit iwc71452 and hotpoint wml520 when it can't drain it shows as u like to call it crazy mode

  • @Leannehendley24
    @Leannehendley24 ปีที่แล้ว +1

    My washing machine is doing the same don't no what's going on with it

  • @muhamedkozic9440
    @muhamedkozic9440 ปีที่แล้ว +1

    Do you find solution? I have the same problem.

  • @TheLaiyembi1707
    @TheLaiyembi1707 ปีที่แล้ว +1

    Mine washing INDESIT machine is doing exactly like that. Please I need what to do? Is washing but not draining!

  • @catherineespiritu5079
    @catherineespiritu5079 6 หลายเดือนก่อน +1

    Same problem my washing is just new then problem came is flashing and the water stack...

  • @washertech
    @washertech 2 ปีที่แล้ว +2

    i think that pcbs cooked or it’s something to do with that. you could have a look at it and see if it’s ok, if there’s no sign of any issues on it it’s probably best fit for a brick

  • @mielekid.w1613
    @mielekid.w1613 2 ปีที่แล้ว +2

    While it could be an element there’s only 1 way to check tbh. Just put it on a cottons 90 and see if it heats. Then either it’s heater or pcb

    • @ivankirola2707
      @ivankirola2707 2 ปีที่แล้ว

      You can check iz with multimeter

  • @leebox9911
    @leebox9911 ปีที่แล้ว +1

    Got the same washer mine just gone th same now it won't empty

  • @angelahenry1511
    @angelahenry1511 ปีที่แล้ว +1

    I switch my indisit machine on but it doesnt actually show any lights fir about 10 minutes sfter power turned on ? Then theyre all flashing ?

  • @yasmindurrani5718
    @yasmindurrani5718 6 หลายเดือนก่อน +1

    My red light is flashing next to the lock symbol what does it mean

  • @kelvinguzman2516
    @kelvinguzman2516 ปีที่แล้ว +1

    Hi, my washing dryer machine don’t take water for washing and the all lights flashing I clean everything filter my washing is indesit iwdc 65125

  • @o00scorpion00o
    @o00scorpion00o ปีที่แล้ว +2

    God be with the days machines were controlled solely by the mechanical timer, the Motor and pump were controlled by the timer directly and not some PCB that cost a fortune to fix if it fails, they lasted years longer than all this digital shite.

  • @Pedro9364
    @Pedro9364 ปีที่แล้ว +1

    I have the same problem. You find the solution?

    • @bootsowen
      @bootsowen  ปีที่แล้ว

      Someone tried replacing the pump and that worked for them.

  • @Cali_Girl1
    @Cali_Girl1 ปีที่แล้ว +2

    When I turned on washer, I just noticed 'white flashes of light' coming from behind my washing machine.
    There were approx. 5 flashes of lights.
    What could possibly be causing it?
    It's an OLD washing machine.

    • @bootsowen
      @bootsowen  ปีที่แล้ว +1

      Paranormal activity?

    • @mohammadishtiaq869
      @mohammadishtiaq869 8 หลายเดือนก่อน

      The bushes are gone and it’s sparking be careful.

  • @wezz69
    @wezz69 ปีที่แล้ว +2

    It says online that its due to the filter being blocked. I have the same washer dryer with the same issue.
    This is actually my 3rd machine in 3 years (same model) and every one has ended its life this way.
    My filter and flow pipe are clean as new… ITS JUST A CRAP MACHINE! After Christmas im ditching indesit forever. They want to charge me for each machine at the time of failure.
    It sometimes will start a program but then get stuck half way with all lights flashing.
    Plus, while theyre flashing i have to punch fcuk out of it to open

    • @bootsowen
      @bootsowen  ปีที่แล้ว +2

      I agree with you on the indesits, I haven't found a good one, they seem to get faulty boards, and the build quality of the boards is pretty crumby, so it is easy to see why.

    • @liamcoyle6458
      @liamcoyle6458 3 หลายเดือนก่อน +1

      ​@@bootsowen the parts on the control board are made in China.

  • @alpitu21
    @alpitu21 2 ปีที่แล้ว +6

    F1 (LED 4)
    This indicates that there is a short circuit in the washing machine’s motor, which could be potentially serious. An expert is needed to examine the motor.

    • @bootsowen
      @bootsowen  2 ปีที่แล้ว +4

      What is an expert?

    • @alpitu21
      @alpitu21 2 ปีที่แล้ว +2

      @@bootsowen maybe reffering to the Indesit Service people, definitely not experts though lmfao

    • @bekolaundry1400
      @bekolaundry1400 2 ปีที่แล้ว

      @@bootsowen an expert that knows alot about motors

    • @whirlpool_addict_
      @whirlpool_addict_ 2 ปีที่แล้ว

      Chances that brushes are shorting (when they are connected to the pcb they may be both connected to one connector if not then its the windings

    • @stephenifeoluwa8267
      @stephenifeoluwa8267 10 หลายเดือนก่อน

      Please put me through how to examine the motor

  • @joshuasatishramosborn5462
    @joshuasatishramosborn5462 ปีที่แล้ว +2

    Hello I have the same washing machine but my one is beeping and also making funny noise

  • @stephenifeoluwa8267
    @stephenifeoluwa8267 10 หลายเดือนก่อน

    Mine is flashing all lights with the lock light on and all 3h ,6h ,9h and 12h on what is the cause and possible solution

  • @G2020-
    @G2020- 2 ปีที่แล้ว +19

    This machine is an absolute peice of junk. I had 1 in a rental and it had a mind of it's own.

  • @fifihanine2124
    @fifihanine2124 3 หลายเดือนก่อน +1

    thank you so much👍👍👍😍👍👍👍👍👍😍

  • @aegwasherndryrer
    @aegwasherndryrer 2 ปีที่แล้ว +1

    it means f15 conderser for dryer you cant use the washer too

  • @luich1288
    @luich1288 2 ปีที่แล้ว +1

    I have the feeling that pcb Is gone this time, can you check It? I think it's the Power supply for the board, or it's Just the microcontroller gone.

  • @pavankumar-hh5ki
    @pavankumar-hh5ki 6 หลายเดือนก่อน

    Can we open the door when it is in spin mode and the cloths are in drying mode. How to open the door.?

  • @thelaundrycookie1200
    @thelaundrycookie1200 2 ปีที่แล้ว +1

    according to the indesit website this is error F01, which is a PCB fault.

    • @bootsowen
      @bootsowen  2 ปีที่แล้ว +1

      Pcb fault is no good

    • @alpitu21
      @alpitu21 2 ปีที่แล้ว

      Motor pcb fault

    • @balfie18
      @balfie18 2 หลายเดือนก่อน

      F01 while it shows on the fault list that it can be a motor fault, a pcb fault or heating element. It's always the heating element for F01, this tho is F05 so just blockages somewhere.

  • @Pralkapralka
    @Pralkapralka 2 ปีที่แล้ว +1

    Pcb seems gone, I wonder if the dryer heats up on a drying cycle or will it do the error again or just blow cold air

  • @Baddiebarbiepink
    @Baddiebarbiepink ปีที่แล้ว +1

    It’s a bit nonsense that is 😅that got me 😁🤣🤣🤣

  • @stephenifeoluwa8267
    @stephenifeoluwa8267 10 หลายเดือนก่อน

    How do i know if the water inlets valve is bad or faulty

  • @Ksivakaran
    @Ksivakaran ปีที่แล้ว +2

    I finally done it

  • @danielhanley-thurkettle8904
    @danielhanley-thurkettle8904 2 ปีที่แล้ว +1

    Have you still got it I hope you can fix them then you can sell them 60 up to 120 pound quite a bit of money your mate couldn't you

    • @bootsowen
      @bootsowen  2 ปีที่แล้ว

      I don’t like selling used machines to people that I don’t know. It is tricky when they call you a month later and say it is broken. I don’t mind giving them to friends

  • @feliciaaddai4037
    @feliciaaddai4037 6 หลายเดือนก่อน

    Hmm ! This is the same problem I'm facing now😢

  • @MrJetta985
    @MrJetta985 2 ปีที่แล้ว +2

    Your pump is broken. You have enough spare parts. Change it

  • @alpitu21
    @alpitu21 2 ปีที่แล้ว +3

    It's the PCB inside the washer next to the motor, very common error in Indesits, dunno how to fix it tho
    ↓↓↓ see my error code comment

    • @danandlaundry
      @danandlaundry 2 ปีที่แล้ว +1

      I always used to see them do it all the time I don’t see it as much anymore mine hasn’t done this nor did my old one

    • @alpitu21
      @alpitu21 2 ปีที่แล้ว

      @@danandlaundry i saw some do it, and also how to replace the motor pcb

  • @StrongerFish309
    @StrongerFish309 ปีที่แล้ว +1

    Machine is probably gone by now, but seeing this video, PCB seemed to be nothing but toast.

  • @mariaisidoramartinezmartin9488
    @mariaisidoramartinezmartin9488 6 หลายเดือนก่อน +1

    Con mi lavadora tambien pasa eso también tengo una Indesit

  • @jamesgriffin3866
    @jamesgriffin3866 ปีที่แล้ว +1

    First port of call is to see if the drain pump thingy is blocked at the front. Remove bottom plastic cover and unscrew black cap...
    Have a few towels ready it's a bit messy.
    Five 3in twigs removed and the machine seems OK. (Fingets crossed)

  • @kidsmaster4522
    @kidsmaster4522 9 หลายเดือนก่อน +1

    I got the same problem today. Googled it. It’s error code 15 means heater control issue. Water heater inside the machine is not working. This problem could happen for multiple things.. rather than repairing it, just order new Samsung machine. I used it for last 7 years. It’s time to say good bye.

    • @bootsowen
      @bootsowen  9 หลายเดือนก่อน +2

      Why not repair? an element is cheap

  • @ivankirola2707
    @ivankirola2707 2 ปีที่แล้ว +1

    Just check the heater. Very simple.

  • @Ksivakaran
    @Ksivakaran ปีที่แล้ว +1

    Please remove the water waste running pipe after remove it put the washing machine upside down. There is some pipelines going through waste water. Every each pipe have to clean and back of the waste water drained need to clean.

  • @lovely_Life19
    @lovely_Life19 8 หลายเดือนก่อน

    Hi May Friend can you help me please my Bush Washing machine lights are flashing and not starting?❤

    • @bootsowen
      @bootsowen  8 หลายเดือนก่อน

      the flashing usually indicates a fault, what lights and how many flashes show which fault, maybe google it.

  • @ParadiseParadises
    @ParadiseParadises ปีที่แล้ว +1

    mines not spinning does anyone know why its not?

  • @danielhanley-thurkettle8904
    @danielhanley-thurkettle8904 2 ปีที่แล้ว

    Yeah it's the element for the tumble dryer yeah always do that on that ok

    • @corneliastoica9448
      @corneliastoica9448 ปีที่แล้ว

      Hy Daniel, do u wanna help me with same problem !?

  • @samleeds2017
    @samleeds2017 2 ปีที่แล้ว

    mine one doing same idk why will try to spill all water

  • @Zainwhocamefromspain
    @Zainwhocamefromspain 9 หลายเดือนก่อน +1

    Flashing lights r error codes just incase yk

  • @stephenifeoluwa8267
    @stephenifeoluwa8267 10 หลายเดือนก่อน

    Am confused

  • @funfairrides5409
    @funfairrides5409 2 ปีที่แล้ว +1

    It could be the brushes on it on mine it was the dryer and the brushes but it might be different on that one

  • @benthebossjackson4388
    @benthebossjackson4388 2 ปีที่แล้ว +1

    Flashing lights are failures.
    There are many faults with this machine.
    First your dryer fan / motor is busted.. u can hear it straining...
    The dryer its self has a broken heater
    The main control board has failed... its not communicating with the module at the back of machine.. will need replacing and re programming..
    the motor triac defo has gone
    the motor brushes are fine, but the motor it self is defo failed...
    Scrap it ... rip the parts from it, because your bound to find another and be easy parts when u get another... its a shame cos its in good body condition, but u can see why it was tossed out, the cost to fix would be well over £300

    • @bootsowen
      @bootsowen  2 ปีที่แล้ว +1

      How can you tell all that about the machine?

    • @balfie18
      @balfie18 2 หลายเดือนก่อน

      This is completely incorrect.

  • @bekolaundry1400
    @bekolaundry1400 2 ปีที่แล้ว +1

    interesting

  • @stephenifeoluwa8267
    @stephenifeoluwa8267 10 หลายเดือนก่อน

    Indesit IWC81481

  • @Ksivakaran
    @Ksivakaran ปีที่แล้ว +1

    Please don’t buy this washing machine everybody having same problem. I have a two washing machine same problems.

  • @richardbutler4488
    @richardbutler4488 2 ปีที่แล้ว +3

    Get it out of your life 😎 that’s what to do!

  • @scottydog5839
    @scottydog5839 2 ปีที่แล้ว +1

    Brick it!! 👍👍 🧱

  • @TomTheXboxSeriesX
    @TomTheXboxSeriesX 2 ปีที่แล้ว +1

    Brick I hear rumbling in the brick pile…

  • @Lenardd
    @Lenardd 2 ปีที่แล้ว +2

    Give it what it deserves, a brick! 😹