Anycubic Vyper: Firmware and Screen update- How to, and weird issues I ran into along the way.
ฝัง
- เผยแพร่เมื่อ 21 ก.ค. 2021
- In this video I upgrade the screen and printer firmware to the latest and walk you through what things I encountered to hopefully help you have a smooth experience.
- วิทยาศาสตร์และเทคโนโลยี
Thanks for vids. I'm having an issue with my 2 vypers... No matter how I set it to 275 nozzle, it defaults back to 260. I've tried every thing I can think think of, cura settings, firmware, octoprint and octodash settings. A few months ago, 1 of them printed and held 300 just fine, but idk why it doesn't any more, IDT I updated the firmware on that one, but cura settings have changed. Any help would be much appreciated!
thanks finally got it working with original sd too. Thanks
Very informative. Thank you👌🏻
I’m glad it was helpful, thank you for watching.
Thanks, similar problems here with the SD cards. Had to use smaller size (4GB) to get it updated. readme file is wrong indeed on the screen update procedure.
Glad to hear it's sorted now, thanks for watching!
The SD card reader on my Vyper is broken. I have to push the card to be detected.. Is there any way I can replace it? or I need to replace the whole mainboard...?
Updated my brand new one to 2.4.5 and since then when I click on auto leveling the screen stays on it flickering super fast and doing nothing.
edit: I had to download a third party tool to FAT32, 4096Bytes my 32gb microSD card. After putting the screen folder onto it, the update worked like in your video for the screen. After the start sound at the end I turned it off and removed the microSDcard. Then I turned it on and auto leveling worked again for me!
Thanks to your video I was able to find out what the problem was, many thanks!
can you tell me what third part app you used i have that problem as well
Windows can do that just fine, problem is I tried with a 32Gb SDCard.
I had to redo the screen update using a 1GB SD, worked flawlessly.
I use a formatting tool called Rufus if my drives start acting up. It can also make great bootable flash drives. rufus.ie
@@OlimpiuCristianMihai appreciate this comment brother mine is doing horrible
@@uzamakisaiyan8767 did you use 32 micro SD card?
Thanks!
I have a question for you, I’m having trouble getting my vyper to perform Cura pause at height scripts or filament changes. It’ll do the pause and move the printer head but the screen won’t continue to allow me to continue the print. What do I need to do?
If that's giving you trouble, you may want to use an additional software like OctoPrint to manage the printing. Lots of people use that for paused timelapse printing and filament color changes. Best of luck!
thanks so much.... i got my printer 5 Days ago and havent recoginzed the micro sd slot until now!!!
Glad you found it helpful! The Vyper has been so much fun, hope you enjoy it and thanks for watching.
Do you know why whenever I try to print something it just turns off but not turns off entirely
I run Klipper on my Vyper; this way only the Anycubic logo is visible so I'd like to replace it to a custom picture at least. Can it be simply done by modifying the image files in the DWIN_SET folder?
I've tried it, and changed some pictures. Made the firmware update according to your video, got "SD Card process.... END!" message too on the blue screen (no beeping), but after turning off and on, it still shows the original picture... I have only 16GB microSD card, can it be a problem? Any help is appreciated, thank you in advance!
waar vind ik de folder DWIN-SET?
how did you get the back cable to not touch the build plate, mine is always on the plate until the print starts to get taller.
Hi Marco, When I first built the printer I tried to make sure all cables were flat and not twisted, but other than that I didn't do anything specific. Some people have been rotating the top half around to help with cable control. I have seen several cable management files in Thingiverse that should fit the Vyper (like this: www.thingiverse.com/thing:4346312).
I've also had my eye on this, for the heated bed cable: www.thingiverse.com/thing:4919531
Thanks for watching!
@@renaissancelaboratories5645 That thing works fantastic. One of my first prints on this thing and it has kept that cable away from the bed.
What micro SD card did you use? I have two of them and neither will let me correctly format them
I have a Kingston 2GB microSD, it's older. The brand name shouldn't matter much but the size of the card may be a factor. If you are using Windows, try a free utility called Rufus. It works great for creating bootable flash drives, but is also a solid utility for formatting. I hope it works out!
Hey! I the Y belt of my printer broke when I was adjusting it. Can you tell me how to change it? Thanks in advance
Hello, I've not had to change my belt yet. I would imagine the process is similar to other systems such as an Ender 3 if you can find some tips there. Best of luck!
What are the new functions of the firmware update?
I don't notice a difference of any features on the screen or the printer. I suspect this was largely bug fixes that were resolved after the printers shipped.
What size microsd card did you use? I tried a 64 gig and it does not read it.
For the screen update I used a 2GB MicroSD from Kingston.
For the printer firmware, I had to use the SD card that came with the printer. For some reason it didn't read the other one I had. Best of luck.
If you have to open it to get the Board version - best to do this when you get it… before you assemble……. And make a label on he side - save time down the road.
The opposite happened to me, I put the 2gb sd, save the firmware downloaded from the AnyCubic website and now the equipment turns me on but nothing starts, it stays on the logo and the extruder light flashes.
any suggestion? I have removed the sd and turned on and still the Vyper does not start me. HELP
did you find an answer for this?
That is troubling. You can try contacting AnyCubic support via email, I find them to be responsive. Or, try a different SD card and try the firmware upgrade again. Also, if you can get an older version of the firmware, you can try downgrading.
como lo solucionaste?
@@byrondefaz Pudiste hacerlo? aun requeris ayuda?
@@Xavileexleee Lo solucione muchas gracias, tenian razón solo era cuestión de cambiar de micro SD
Printer not turning on after MicroSD inserted in screen. Whats wrong?
MicroSD 16gb, formated as FAT32 - 4096Bytes, DWIN_SET folder copied.
When I remode card from screen, all works ok, only screen flickering at some functions after 2.4.5 update.
May be I must find smaller MicroSd?
I have had mixed results with different SD cards. Yes try a smaller one or a different one if you have it.
My firmware updated, but my screen will not. I get a blue screen that populates all of the text instantly, instead of slowly like yours did as it downloaded the files. This makes me think it's not actually downloading anything. It has the DWIN_SET folder on it and should be formatted correctly. I am so lost. If you can help at all please let me know.
If it is acting strangely, you could try using a different SD card. Smaller, like 8GB or less, seems to work better for these firmware upgrades. Best of luck!
My issue is that my vyper wont start printing when I select the model in the screen, it does reach the bed and nozzle temperature and the fan all the way up but it doesn't start printing
You may have tried this but, I would try a different flash drive or a different model to see if either one is the issue.
thank you very much for the video!
it was hidden in plain site on their page and i missed it.
i think it took you so long to update the screen because it's a very old micro sd card, took me less then 5 seconds on mine.
That makes sense, this micro SD I have is ancient and likely very slow. Even copying the files from Windows takes quite a long time. I do now have a 64 GB microSD I can try next time. Thanks for watching.
Could you show where in the official site is the firmware update is? is it under Anycubic Care?
Yes, in the section of Anycubic Care is a link under the firmware. It will open a google drive zip file which you can download and unzip
Scroll down on their site to the Anycubic Care section and the firmware is there. The file contains firmware for both versions of the motherboard, as well as the screen update.
www.anycubic.com/products/anycubic-vyper
Nice video. Don't you activate linear advanced on your printer?
watched a video of a German youtuber where he added a linear advance function to his printer. But he talked about the files from the github.
If I update, will the function turn on for me?
it looks like the linear advance function doesn't come with the update.... If anyone has a lesson on how to enable it, please share
Looks like Mister Ngan does a very nice job explaining liner advance here:
www.misterngan.com/7406/enable-linear-advance-for-anycubic-vyper/
Thanks for asking this question, I will investigate this for my own printer. Thanks for watching!
@@renaissancelaboratories5645 now I feel stupid because I haven't found this page before. Thanks a lot!
when trying to insert the micro sd into the screen it fell between the sd reader and the plastic case, getting stuck underneath the screens board. be careful when inserting
This happened to me as well. I had to use tweezers to extract it. If you don't align correctly with the port, there is plenty of space where this will just not insert correctly. Thanks for watching!
there has to be another way to see the motherboard version, taking it apart is commercially counterintuitive
I hear you, it's a bit much but I haven't found another way to positively identify the motherboard version. The firmware is version-specific so there must be a reason. Best of luck and thanks for watching!
i have a queestion have you anybody had a problem with models not coming up on the screen i have tried three different sd cards and no models show up it was working just a few days ago so i dont know what happened .
Have you tried re-formatting the card FAT32, with 4096 cluster size? I've been using an old SanDisk 2GB SD card to print without any issues. Best of luck & thanks for watching.
You have to press refresh once your insert card in with new gcode files (the two Arrows are the refresh function.
except now it wont auto level
it needs an 8gb for microsoft to format at 4096 Its not any anycubic issue
You never showed where you got the DWIN folder
Greg, I had the same question. Through some searching, I found it is the only file in the Screen Folder of the 2.4.5 firmware.
The dwin folder is downloadable under the anycubic website under the screen folder
Sir, can you please give me your email ID?. I have few queries about printer.
Hello, I'd be happy to answer any questions here so others can benefit too. Thanks for watching.