ไม่สามารถเล่นวิดีโอนี้
ขออภัยในความไม่สะดวก
6200 Watt Powmr Hybrid inverter
ฝัง
- เผยแพร่เมื่อ 15 มี.ค. 2024
- I set up my Powmr 6200 watt hybrid inverter to run as a Uninterruptible Power Supply (UPS) to run all the power outlets and all the lights on the house.
The inverter has performed flawlessly all day running power loads up to 3kw or just under 50% of rated capacity.
Wow, this is pretty impressive!
Thanks for your kind comment but this is only a test configuration. I am currently adding more panels and putting the inverter into a cabinet. I will be making a few more videos about this system very soon.
@@postiemania look forward to seeing the follow up then!
@@andrewford80 I posted a no bull video of real readings.
Nice clean install.
Thanks 👍
I was thinking to focus on my power needs for a while. Get it under handle. Not just to sort out the bills, but to also remove dependancy somewhat.
I’m just starting, literally today and only have the knowledge from wiring up race cars.
My first thought (I bet I look back at this and laugh) is to have 10kw back to the system (to get me credit for the day rate of being hooked up to the grid). Then 5kw for home use (I work from home and have a pool). Not even sure if I can hook it all up like that.
I have a 13m x 6m shed and a 10m x 4m back patio. I was thinking to get good secondhand panels (couple of years old from houses that are getting demolished) and fill the space.
Hopefully I can get this system going.
My question, if it’s not entirely stupid, can I keep the current Fronius 5kw inverter and panels and just hookup a 10kw inverter and 15kw’s of panels (there is an 10kw Sungrow inverter - SG10RS that supports 15kw).
Yes you can keep the original setup and add a completely separate system with batteries and separate solar panels. Good 🤞
Do you know by any chance what the difference between the hybrid and all in one Inverters is? I currently have a 10.35KW Array with two sunny boy 6kw which unfortunately lack hybrid functionality so running on battery or generator is not possible on my current array. I currently plan on expanding to a maybe extra 4-6 panels as I am to producing enough to cover 2 month during the winter. I am debating to replace the sunny's with two 6200w all in one Powmr unless the hybrid model is what I need. I think I have 2 strings per inverter currently.
@@matg6113 from what I understand a hybrid and all in one are the same.
We have installed powmr HVM-6.2M-48V-N. In SUB setting inverter switches to utility itself after 02 minutes irrespective of solar energy. Batteries are attached. Please guide us
I need more information. Firstly reset to factory default settings and tell me what is your battery voltage. Change SUB to SBU. Let me know more information thankyou.
@@postiemania battery power 54 volt. I have observed that inverter work in SUB mode with the help of utility ppwer
.make it sbu mode solar battery and utility.
Charging make it only solar.
I had a very bad experience with Powmr products. Their GT-800 micro inverter lasted 6 months and then broke. Customer support and warranty protection are real issues and have not been resolved. They keep asking for new information to exhaust the customer. Their official distributor in Thailand, Flagship Store on Lazada, does everything to not provide warranty. The same goes for providing a simple AC connection cable between the 2 micro inverters presented on the site. After sending at least fifty emails, I gave up. The customer service is deplorable.
I just bought one same as yours but mine is 4500 W How did you set it for priority solar only embarrassed next On mine is the grid keeps coming on fis there something I'm doing wrong on the settings please help
I need more information Hector. Is your machine a hybrid?
Is this inverter installed outdoors? This inverter is absolutely not outdoor rated.
This is a test rig and is located under shelter and is not required to be weatherproof. The whole previous Solar installation was completed by monkeys on crack or worse. It is my job to correct the previous installation errors and build a compliant system that actually works. The solar panel placement was so bad it gets only 4 hours of Sun a day and the conduit bringing the DC feed was draining water into the PV isolator. Total cost in materials so far is $1500 USD which I think is very reasonable for the specs of the system. I will be doing a few more videos on TH-cam about this as we progress.
Thanks for the clarification.@@postiemania
@@solarcharging9743 you might be pleased to know the Solar Power system is safe and sound in a secure metal cabinet with lockable AC and DC isolation both inside and outside of the cabinet. The test run over the first two months has performed very well. The next phase of engineering involves upgrading the battery supply to a 1000Ah 48V battery pack with a climate controlled cabinet using 24 cells at 2.1 volts each.
Cheers!
It's free energy John 😎
@@postiemania It sure is, Robert. 😂👍
@@_John_Sean_Walker It is more of an experiment to test the efficiency of solar panels under different conditions. These include time of day and panel orientation with respect to the Sun. Also taking into consideration season and cloud cover. I have collected 20 solar panels that I will be fitting to different facing sides of the roof.
@@postiemania Sounds interesting.
Good luck with your experiment, Robert. 👍
@@postiemania btw, are you familiar with this channel?
th-cam.com/users/UndecidedMFvideos
I cannot recomend. It smoked and almost catched fire. Seller do not communicate, really dissapointed.
@@michalknapek5697 show video
@@postiemania of what? I don't want to enable it and that smoked i don't have it recorded. It smell of burn so definitively will not try to do anything until seller write me.
@@michalknapek5697 No don't enable just show how you wired it up and what load you have on it. What battery setup do you have? I need more information....