Rusty Hand Plane Restoration

แชร์
ฝัง
  • เผยแพร่เมื่อ 24 ธ.ค. 2024

ความคิดเห็น •

  • @1959Berre
    @1959Berre 2 ปีที่แล้ว +2

    Perfect video. Well filmed. No annoying music and no useless talking. Great job.

  • @lvvry1855
    @lvvry1855 2 ปีที่แล้ว +5

    You are the Master! Thank you for teaching me that I'll never be able to restore my 60 year-old Stanley planes. I'm crying myself to sleep tonight.

  • @j.r.tidwell3318
    @j.r.tidwell3318 ปีที่แล้ว +3

    Never seen anyone power coat a plane before. Modern day Japanning I guess.. Great job on it my friend..

  • @whittysworkshop982
    @whittysworkshop982 4 ปีที่แล้ว +1

    Soon as I seen you drift the pins I knew....."this lad is PROPER!!".........Best plane rejuvenation video on TH-cam by a long shot. VERY well done SIR!! IMMACULATE!!

  • @naczelny1
    @naczelny1 2 ปีที่แล้ว +1

    That was some thorough work. Haven't seen that kind of restoration before. Cleaning, yes; not real restoration. You had me the moment you took it to chrome plating.

  • @jkg2754
    @jkg2754 3 ปีที่แล้ว +1

    I must say, you’re on another level. The powder coat puts you in a level above !

    • @jkg2754
      @jkg2754 3 ปีที่แล้ว

      Also the ability to chrome

    • @jkg2754
      @jkg2754 3 ปีที่แล้ว

      Although my wood looks100 times better than yours !!!!!!!!

    • @jkg2754
      @jkg2754 3 ปีที่แล้ว

      You did too much on the metal parts to have left the knob and tote looking like that !

  • @carlmcgee1623
    @carlmcgee1623 ปีที่แล้ว +2

    A masterpiece complete ! GREAT WORK !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

  • @lindaloftus8780
    @lindaloftus8780 2 ปีที่แล้ว +1

    Looks nicer than it did when it was new. Doesn't have the roughness in paint. Fantastic job.

  • @AlexPittendreigh
    @AlexPittendreigh 4 ปีที่แล้ว +4

    Strangely satisfying watching a crusty old hand tool being restored back to pristine condition.

  • @osnelli
    @osnelli 3 ปีที่แล้ว +2

    My grandfather had one EXACTLY this model, I remember so very well even as a child in the sixties, I use to play with it when he was away, great tool restoration

  • @richardpalmer6196
    @richardpalmer6196 4 ปีที่แล้ว +14

    Good job. I inherited all my dads hand tools . Most are from the 30's and 40's. I'm going to these ideas to renew them for my grand son.

    • @mytinyworkshop1213
      @mytinyworkshop1213  4 ปีที่แล้ว +2

      Thank you, good luck with your restorations.

    • @howardwayne3974
      @howardwayne3974 4 ปีที่แล้ว +1

      You are SO lucky to have classic tools like that !!!! I hope you know those things go for a LOT if money in the antique tool market !! Please make your son aware of the history in his hands if he doesn't already know .

  • @mariotoro460
    @mariotoro460 3 ปีที่แล้ว +1

    Wawww presioso quedo el stanley # 4. El mejor cepillo carpintero.gracias maestro restaurador por subir tan preciado video me gusto 100 punto.

  • @mattg6262
    @mattg6262 4 ปีที่แล้ว +1

    I'm so glad you cut wood with it at the end.

  • @thedieiscast9729
    @thedieiscast9729 4 ปีที่แล้ว

    A nice restoration, good for another 50 years

  • @FranktheDachshund
    @FranktheDachshund 26 วันที่ผ่านมา

    A great rebuild and you 😊created a nice looking fully functional plane.

  • @georgebrown8312
    @georgebrown8312 ปีที่แล้ว +2

    Amazing job you did restoring that plane to working order. It looks much better than before and it works like a charm as well. Great work.

  • @martinjp1
    @martinjp1 2 ปีที่แล้ว +1

    Superb work.

  • @krugtbifro6152
    @krugtbifro6152 3 ปีที่แล้ว +1

    I'm amazed at how many parts there are once it's broken down

  • @billsutherland7486
    @billsutherland7486 3 ปีที่แล้ว +3

    Now it’s almost too nice to use. I’ve never seen the powder method before; thanks for showing it. I’m surprised you didn’t lightly oil every screw and bolt while assembly. Great video, best restoration I’ve ever seen!

  • @elsdp-4560
    @elsdp-4560 4 ปีที่แล้ว +1

    THANK YOU...for sharing. Very nice.

  • @denegillespie5767
    @denegillespie5767 4 ปีที่แล้ว +2

    In the current lock down these displays of quiet, patient hand skills is the perfect antidote.

    • @mytinyworkshop1213
      @mytinyworkshop1213  4 ปีที่แล้ว

      Thank you very much. I’m trying to keep the videos coming. Hopefully I don’t run out of projects and supplies.

  • @grantwilliams630
    @grantwilliams630 4 ปีที่แล้ว +7

    One of the best restorations I’ve ever seen!

  • @keithbreuer7355
    @keithbreuer7355 4 ปีที่แล้ว +1

    Wow! In many ways better than new. Ready for many decades of use!

  • @leahcimressik5994
    @leahcimressik5994 2 ปีที่แล้ว +1

    Wow, great work. It's like new now!🤩🎖
    Keep it up and stay healthy! 🍀😷🤕💪🏼💐
    Michael

  • @larrylambright6631
    @larrylambright6631 4 ปีที่แล้ว +3

    This is by far best restoration I have seen (and I have saw a lot on TH-cam).

    • @jkg2754
      @jkg2754 3 ปีที่แล้ว +1

      It would have been the best if he had given the knob and tote more attention. That was a real let down for me. I have 8 coats of wipe on poly on mine, really gives the beauty of the rosewood some depth !

  • @WaltherGrube
    @WaltherGrube 4 ปีที่แล้ว +1

    Wow! Just wow!

  • @coshwoodworks1395
    @coshwoodworks1395 4 ปีที่แล้ว +2

    I have watched dozens of hand plane restoration videos, this is not a restoration... this is witchcraft, attention to detail and a little bit of magic.
    Beautiful work and a Job Well Done!

    • @mytinyworkshop1213
      @mytinyworkshop1213  4 ปีที่แล้ว +1

      Thank you very much. Thanks to God I had a lot of patience on this one.

  • @sahuaritasteve
    @sahuaritasteve 4 ปีที่แล้ว +1

    I really enjoy your videos. I now look at "old stuff" in a way I never have before. Thank you.

  • @uktony1525
    @uktony1525 4 ปีที่แล้ว +2

    Truly a silk purse from a sows ear, beautiful restoration.

    • @mytinyworkshop1213
      @mytinyworkshop1213  4 ปีที่แล้ว +1

      Thank you very much, I’m glad you liked it. Thanks for watching.

  • @amantegamboa4213
    @amantegamboa4213 2 ปีที่แล้ว

    Wow brand new

  • @eddiebarzoo
    @eddiebarzoo 4 ปีที่แล้ว +1

    .Good Restoration,Thanks for sharing

  • @dianeparvin2887
    @dianeparvin2887 4 ปีที่แล้ว +2

    Beautiful. Be proud of your workmanship.

  • @j.d.1488
    @j.d.1488 2 ปีที่แล้ว +1

    If you wanted to keep a plane that had a good amount of jappaning how would you touch up the missing areas or you would you strip it totally as well?
    Need to know your set up for powder coating. Looked amazing.
    Easier looking than a spray lacquer finish and better than home made oven japanning.

  • @pineywoods0186
    @pineywoods0186 4 ปีที่แล้ว +2

    Fantastic job. The most detailed restoration that I have seen. Thanks.

  • @alfonsogabrielaguirregende8453
    @alfonsogabrielaguirregende8453 4 ปีที่แล้ว +2

    Me he quedado sorprendido, la mejor restauracion de un cepillo q he visto😮

  • @madkiwimuso2477
    @madkiwimuso2477 4 ปีที่แล้ว +2

    Exceptional effort! Not normally a fan of powder-coating, but as a replacement for japanning I don't think it can easily be beaten. Well done.

  • @Robmalina
    @Robmalina หลายเดือนก่อน

    this is some next level s..tuff. beautiful work.

  • @letz_getschwifty9785
    @letz_getschwifty9785 3 ปีที่แล้ว +1

    That was certainly satisfying to watch! Great result!

  • @RJRansdell-d1y
    @RJRansdell-d1y ปีที่แล้ว

    You did a very nice job of restoring the plane, my dad had a lot of the old stanley hand planes which were stolen before he passed and I was never able to get them, and I wish I was

  • @Thesidingsworkshop
    @Thesidingsworkshop 4 ปีที่แล้ว +2

    I too restore old tools mainly woodworking and plumbing. This video like your others is great mate. I've got to get myself a powder coating setup looks fantastic. Much better wearing than enamel spray.

    • @mytinyworkshop1213
      @mytinyworkshop1213  4 ปีที่แล้ว +1

      It’s worth the investment. My system is from Eastwood

    • @piggybladder
      @piggybladder 2 ปีที่แล้ว +1

      Powder coating's crap. It peels off as soon as you look at it. There's nothing wrong with enamel if it's done properly which it never ever is on YT. Enamel needs primer but before that it needs cleaning properly with detergents followed by acetone. It then needs de-gassing in an oven before priming. After priming and top coating it needs clear lacquer and it needs to cured. Done properly it will outperform powder coating any day of the week.

  • @bluesbrother6525
    @bluesbrother6525 4 ปีที่แล้ว +5

    You've taken restoration and elevated it to an Art form, I'm currently restoring a number 4 but while it will look good when I'm finished it won't look like that. Kudos to you.

  • @conradjelinger2120
    @conradjelinger2120 3 ปีที่แล้ว +1

    This is magnificent! No other words.

  • @tomdickharryjane
    @tomdickharryjane 4 ปีที่แล้ว +1

    Nice before and after. Good job.

  • @toptechnology-diy5662
    @toptechnology-diy5662 4 ปีที่แล้ว

    Best restoration thanks for sharing

  • @conkretedesign
    @conkretedesign ปีที่แล้ว

    Beautiful ❤

  • @mohaimenkazi9787
    @mohaimenkazi9787 4 ปีที่แล้ว +1

    WOW! Just AMAZING! I've seen tons of hand plane restoration videos but I've never seen one like THIS! I have 16 hand planes I acquired and after watching this video I'm rethinking of my whole steps on how I'm going to restore them all. Thank you!!

  • @professor62
    @professor62 3 ปีที่แล้ว +1

    Awesome job! That’s the most complete disassembly and most detailed plane restoration I’ve seen! What made me happy right from the start was to see you using your bare hands, like a man should. Too many guys are wearing gloves like they’re afraid to get their hands dirty. lol Anyway, it was a fantastic restoration that really sets the bar high. Kudos!

  • @thomasthompson6799
    @thomasthompson6799 4 ปีที่แล้ว +1

    Great restoration to better than new condition. I like the powder coat to replace the japanning. Excellent work!

  • @jmsmom67
    @jmsmom67 4 ปีที่แล้ว +2

    Love the powder coating especially the chrome! Nicely done. Thank you for sharing

  • @HansHoffmeister
    @HansHoffmeister 2 ปีที่แล้ว

    Impressive!!!

  • @andrzejporeda7281
    @andrzejporeda7281 ปีที่แล้ว

    Super jest to odrestaurowane ten stary chebelek pozdrawiam serdecznie 👍👍👍👍

  • @scroungasworkshop4663
    @scroungasworkshop4663 4 ปีที่แล้ว +2

    Nice work. I love my powder coating. You seem to get a good result from the masking. The masking I got is the same? only dark brown (no, it’s not packing tape) and it’s a real pain to remove after it’s been in the oven so I just use masking tape and the heat doesn’t seem to bother it. For me it’s easier to apply, comes in various widths and is heaps easier to remove. It comes off very easily while the part is still warm and I remove the sticky residue with eucalyptus oil. I had an oven the same size as yours and found the height to be the limiting factor so I turned it on it’s side. That helped but still limited the size of the parts I could coat so I recently got an old 900mm wide oven and turned it side ways and that is working very well. I really enjoy your videos so thanks and cheers, Stuart 🇦🇺

    • @mytinyworkshop1213
      @mytinyworkshop1213  4 ปีที่แล้ว +1

      I really do like this tape. It is much easier to remove when hot. I’ll keeping an eye out for a bigger oven. However it’s hard to find one that’s on a 13amp plug without a fan built in. Most of our ovens are hardwired.

    • @scroungasworkshop4663
      @scroungasworkshop4663 4 ปีที่แล้ว +1

      My tiny Workshop. Most houses here, post 1980, have a power point behind the oven but of course it all depends on the wiring back to your meter box. It seems most newer ovens here only need 10 amp which is a our standard power point. The 15 year old oven I am using now , which only cost me $40, is 10 amp so I made a 2 meter lead from heavy gauge flex and put a plug on the end. The power rating should be marked on your oven somewhere and that will make it pretty easy to work out the power draw. Also worth noting is that the element in my new oven is the same as the old smaller oven and I even pulled the element out of the old one to keep as a spare for the new one. The new oven had 3 separate elements in it which had me a little concerned about power draw until I realised that only one element at a time could be used. Grill, oven, and warmer. I removed all the wiring to the hot plates, grill and warmer. There is not much wiring left now just the light, fans and the oven element. That made it all a lot simpler to work thing out. Worth looking into. Cheers

  • @lourias
    @lourias 4 ปีที่แล้ว +3

    This is the 3rd video of yours I have watched. You videos are pleasant to watch, and you skill is great!

    • @mytinyworkshop1213
      @mytinyworkshop1213  4 ปีที่แล้ว +1

      Thank you very much. I’m still learning every day.

  • @stillboredatwork
    @stillboredatwork 2 ปีที่แล้ว +1

    Absolutely gorgeous. Well done

  • @natashawilliams3604
    @natashawilliams3604 4 ปีที่แล้ว +1

    Would love to learn more about that powder coating! Fab restoration x

  • @garrypalmer7763
    @garrypalmer7763 4 ปีที่แล้ว +3

    This is one of the best restorations i have seen for a number 4, love it

  • @tungsten_carbide
    @tungsten_carbide 4 ปีที่แล้ว +2

    I'm a fan of many of your restorations and I like the range of techniques you can bring to bear but as a woodworker I can't get behind a few of the decisions on this one. Still, good video and you did rescue a plane that was in serious need of some help!

    • @mytinyworkshop1213
      @mytinyworkshop1213  4 ปีที่แล้ว +1

      What decisions didn’t you like. Thanks

    • @tungsten_carbide
      @tungsten_carbide 4 ปีที่แล้ว +4

      @@mytinyworkshop1213 I suppose the main one was powder coating the cheeks. I know power coating is super tough but as an exposed exterior surface these would accrue chips over time if the plane were in use. And also on user planes one of the cheeks (the one corresponding to the user's dominant hand) might also be a bearing surface like the sole.
      There are also conventions about how various other parts are treated and the colour in the logo recess is one of those things Stanley owners can be quite fussy about (with red having a particular, negative, association). As I say these are just conventions, but it's what most woodworkers are accustomed to seeing and feel "looks right".
      Every owner is entitled to do whatever they want with a tool though!

    • @mytinyworkshop1213
      @mytinyworkshop1213  4 ปีที่แล้ว +2

      Thanks for letting me know. I mainly powder coated the cheeks to prevent rust forming. I own many Stanley planes and tools. I would only be fussy with a restoration if the plane was pre war.

    • @FranktheDachshund
      @FranktheDachshund 26 วันที่ผ่านมา

      ​@@tungsten_carbideUnless it is going into a museum, someone fussing over the color of the background logo really needs to stop taking things so seriously.

  • @elfowl6873
    @elfowl6873 4 ปีที่แล้ว +3

    VERY GOOD!!! better than new. Great job MTW.

  • @Jimmiburn
    @Jimmiburn 4 ปีที่แล้ว +1

    Definitely craftsman hands absolutely amazing work👌 subscribed 🙂

  • @johnnybuttons8814
    @johnnybuttons8814 4 ปีที่แล้ว +1

    Great job!

  • @Dennis-ye4kf
    @Dennis-ye4kf 4 ปีที่แล้ว +1

    Really nice job !! It looks like new.

  • @alfredoroldanmunoz4131
    @alfredoroldanmunoz4131 3 ปีที่แล้ว

    Nice job guy, I love that sound, thank you.

  • @Kleiner_Lutz
    @Kleiner_Lutz 4 ปีที่แล้ว +3

    What a beautiful tool this is, awesome job 👍

  • @larrylambright6631
    @larrylambright6631 4 ปีที่แล้ว +1

    You beat me to the draw. You did what I plan to do with my collection. My only problem is that I live in Thailand and it takes a lot longer to accumulate the media blaster and powder coat equipment. It's on order and on it's way from the US. There went what I thought was my original idea. Do some more. I guarantee 1 viewer.

  • @batterymakermarkii2654
    @batterymakermarkii2654 4 ปีที่แล้ว

    Now that is a thing of beauty

  • @maartenb9207
    @maartenb9207 4 ปีที่แล้ว +2

    Awesome job! What a difference. Cool with the diy powder coating, great result!

    • @mytinyworkshop1213
      @mytinyworkshop1213  4 ปีที่แล้ว +2

      Thanks. I want to powder coat everything now

    • @maartenb9207
      @maartenb9207 4 ปีที่แล้ว +1

      Not sure the ladies will love that 😂

  • @mauricecasey5556
    @mauricecasey5556 4 ปีที่แล้ว +1

    Best resto I've seen, brilliant! I haven't seen anyone yet able to duplicate the lacquer finish like Stanley.

  • @markwhites2730
    @markwhites2730 2 ปีที่แล้ว

    Best i have seen yet A great job!

  • @rufusdtonebug4049
    @rufusdtonebug4049 4 ปีที่แล้ว +2

    That was superb, watched the whole thing from start to finish 👍😀

  • @Seahorse1414
    @Seahorse1414 4 ปีที่แล้ว +1

    Superb , start to finish , just terrific !

  • @Mitchfork
    @Mitchfork 4 ปีที่แล้ว +11

    Plane restorations are always some of my favorites. I don't know what it is, but even though they all follow the same template, the transformation is always incredible to see. Great work, I never see people disassemble the lever cap, so that was a nice touch.

  • @fainestbless2679
    @fainestbless2679 3 ปีที่แล้ว +1

    really nice work! i have an old millers falls no9 that needs restoration. what kind of sand paper should i use for the metal?

  • @stiggywatts4258
    @stiggywatts4258 2 ปีที่แล้ว +1

    Very nice 🙂
    Of course, if people looked after their tools there'd be no need to restore them 😁
    A note to the new carpenters and joiners out there, buy old tools, restore them if you have to. The new tools available today are not as good 😑

  • @billygoatracer
    @billygoatracer 4 ปีที่แล้ว

    Two thumbs up 👍👍

  • @pjhalchemy
    @pjhalchemy 4 ปีที่แล้ว +3

    Thanks for your time in showing this restoration. Nicely done. Was curious what kind of tape that was to withstand the oven? Thanks.

    • @mytinyworkshop1213
      @mytinyworkshop1213  4 ปีที่แล้ว +3

      Thank you. The tape is high temp polyester tape.

  • @carlossimoes2133
    @carlossimoes2133 4 ปีที่แล้ว +1

    Good job 👍👍

  • @yirickarzoumanian9396
    @yirickarzoumanian9396 4 ปีที่แล้ว +1

    Excellent Work .....

  • @djevo3441
    @djevo3441 4 ปีที่แล้ว +1

    Awesome resolt amazing restore

  • @АндрейЖуравлев-т7я
    @АндрейЖуравлев-т7я 4 ปีที่แล้ว +3

    Отличная работа!

  • @sergiootero2221
    @sergiootero2221 4 ปีที่แล้ว

    Congratulations! Nice job!

  • @philipchandler330
    @philipchandler330 3 ปีที่แล้ว

    Exceptional

  • @edwardralphsmithbezuidenho492
    @edwardralphsmithbezuidenho492 2 ปีที่แล้ว

    as good as new

  • @KILORESTORATION
    @KILORESTORATION 4 ปีที่แล้ว

    Great job...I really like seeing the powder coating on the chip breaker...that silver looked
    great.

  • @aniellerose3817
    @aniellerose3817 4 ปีที่แล้ว +2

    Amazing transformation
    ❤️👌😍

  • @ared18t
    @ared18t 4 ปีที่แล้ว +1

    What is that stick of metal you use to remove pins made of what I assume is tool steel? It now seems like a must have even though I've never felt the need for one before.

    • @mytinyworkshop1213
      @mytinyworkshop1213  4 ปีที่แล้ว +1

      I’m not too sure. Whenever I see these at boot sales I buy them. Can never have too many,

  • @jensaarnaes150
    @jensaarnaes150 4 ปีที่แล้ว +1

    Very nice work. I would not have coated the sides of the body however. These need occasional truing up like the base and the coating will prevent this.

  • @andrzejporeda7281
    @andrzejporeda7281 ปีที่แล้ว

    Super jest to odrestaurowane ten cały stary chebelek pozdrawiam serdecznie 👍👍👍👍

  • @guillermoreche4840
    @guillermoreche4840 4 ปีที่แล้ว +1

    Excelente. Buena restauración. Saludos desde España

  • @carnright
    @carnright 4 ปีที่แล้ว +1

    Love powder coating !

  • @russcurrie72
    @russcurrie72 4 ปีที่แล้ว +2

    Great job dude, love the powder coating 😎👍

  • @paulmouradian8968
    @paulmouradian8968 3 ปีที่แล้ว

    great job

  • @martinhawrylkiewicz2025
    @martinhawrylkiewicz2025 10 หลายเดือนก่อน

    Great vid! I recently found an old #4 hand plane from the 1930's Eclipse stamed on the iron. Im trying to restore it and was windering if you knew what type of wood was used in these types of vintage planes for totes and knobs? And what kind of wood finish? My handles look deep red like cherry with coear coating that has beeen warn off in lots of places and cracked. I scrapped that off and sanded it smooth with 120 grit sand paper so far...

  • @mustafanaser4099
    @mustafanaser4099 2 ปีที่แล้ว

    Very nice .. but we need more details about the material yhat you used in this restoration. 👍

  • @dalekrech3904
    @dalekrech3904 ปีที่แล้ว

    What media do you use for sand blasting plane parts?

  • @bobbystanley8580
    @bobbystanley8580 4 ปีที่แล้ว +1

    Awesome!!!

  • @theropesofrenovation
    @theropesofrenovation 4 ปีที่แล้ว +1

    Would love a tour of your shop. Mine is that small as well!

    • @mytinyworkshop1213
      @mytinyworkshop1213  4 ปีที่แล้ว +2

      It’s a pretty cool space. 2 people can barely stand in there.

    • @theropesofrenovation
      @theropesofrenovation 4 ปีที่แล้ว

      @@mytinyworkshop1213 Hmm. Maybe yours is a bit smaller than mine. Mine was made for only a golf cart! lol

  • @АндрейНикитенко-ф4с
    @АндрейНикитенко-ф4с 4 ปีที่แล้ว +1

    Fine. I do not see any flaws.
    And this is another good old tool that causes envy.

  • @WarrenDrakeVRN
    @WarrenDrakeVRN 2 ปีที่แล้ว +3

    This is the most excellent and thorough video I have seen on restoring a Stanley hand plane. Loved it! I am about to undertake redoing a couple of them myself and it looks like I will have to watch some videos and learn how to do powder coating. (All the of the other videos show them only re-painting with spray paint.) Excellent work!

  • @jasonthomas1760
    @jasonthomas1760 3 ปีที่แล้ว +1

    I learned something today, didn't know powder coat came in chrome and clear

    • @mytinyworkshop1213
      @mytinyworkshop1213  3 ปีที่แล้ว +1

      It’s not the best, but it will do if there isn’t any other option. If I were to do it now I would nickel plate it.

  • @johnblanton9969
    @johnblanton9969 4 ปีที่แล้ว +2

    2 questions: (A) How did you get plastic body filler to withstand 400 degree heat? (B) What happened to the red overspray on the chrome coating on this same part ?

    • @mytinyworkshop1213
      @mytinyworkshop1213  4 ปีที่แล้ว

      The body filler is designed for powder coating. I used high temp polyester tape to mask the whole piece.

    • @johnblanton9969
      @johnblanton9969 4 ปีที่แล้ว +2

      @@mytinyworkshop1213 , what kind of filler would that be? This is the first 2 part filler that I have seen that can withstand the heat? That's why I thought it was a plastic filler. And, how were you able to use the tape and it not leave marks? Chrome power is extremely hard to deal with when you mask over it without leaving marks when it is removed. Btw, nice job.

    • @mytinyworkshop1213
      @mytinyworkshop1213  4 ปีที่แล้ว

      The brand of filler is in the video. 14:12. As for the masking tap I guess I was lucky. Its the first time I’ve used this tape and powder coat. I didn’t have any problems with the tape.