Confused. In your video you state that pump should be below 4 psi, yet the amazon link goes to a pump 3-6psi and a 2amp. Please explain. Won't this blow fuel by the needle valve?
My Troy Bilt riding mower has gravity fed fuel to carb. Once my fuel level drops below half a tank (tank is in front of firewall), it acts like it's got fuel starvation. Is it reasonable to add a low pressure pump?
Ive got a 19.5 hp i/c opposed twin briggs and stratton engine with a 4 screw nikki carb craftsman lt1000 manual is it possible to switch from the fuel pump on the carb to an electric fuel pump this is a carb that has no Solenoid the carb mounts on the intake
Used 2.5 to 5 psi pump tried two both ran for 1 minute (clicking) when engine started clicking stopped and pump dead. Its a kholer magnum 18hp carburettor no line back. Any ideas whyvthe pumps are dying?
You can use a higher pressure pump. Just need to"t' into the line before enters the carb and return it to the tank
I've searched for hours trying to find 12 volts with the on. I finally found your video with explains it quickly and succinctly. Thanks
I've got one hooked up to a 12hp Briggs and a toggle switch. If the engine starts to flood, I flip the switch and let the bowl empty a bit.
or you have to work with a return fuel line that drains a little higher, then you can put whatever in it and that will really work
Great ❤, now I move on to modify my top heavy motorcycle 😂.
I did this but I used a Diesel pump and it worked like a charm it was to much pressure it would back fire wen u play with the Throdle
Thanks for the link i just ordered one and thanks for the video
Confused. In your video you state that pump should be below 4 psi, yet the amazon link goes to a pump 3-6psi and a 2amp. Please explain. Won't this blow fuel by the needle valve?
My Troy Bilt riding mower has gravity fed fuel to carb. Once my fuel level drops below half a tank (tank is in front of firewall), it acts like it's got fuel starvation. Is it reasonable to add a low pressure pump?
Ive got a 19.5 hp i/c opposed twin briggs and stratton engine with a 4 screw nikki carb craftsman lt1000 manual is it possible to switch from the fuel pump on the carb to an electric fuel pump this is a carb that has no Solenoid the carb mounts on the intake
My tanks all suck out of the top!How will l get gravity feed ?
Hi! Since I want to upgrade a diesel hatz on bolens 1225 with an electric pump, what I should do with the pulse pipe?
I tried this with a 4 psi pump and am getting too much flow can I put a t and a valve
You could add a fuel regulator which can yield a 1 psi pressure if u want.
Gold ❤
I'm wrestling with this situation right now !
Can this pump work on momo bake?
Can this pump work on motobake
@@josephssmai664Are you baked?
Used 2.5 to 5 psi pump tried two both ran for 1 minute (clicking) when engine started clicking stopped and pump dead. Its a kholer magnum 18hp carburettor no line back. Any ideas whyvthe pumps are dying?
found out most of the chinese pumps have to be isolated from metal to run.. had same issue mounted it to wood and then it worked.
@greg frank why would that be?
@@metalrooves3651 found no insulation between wiring and housing on the three i took apart.
Why would i go electric? more reliable?
Some pumps are cam driven that's why I did it. Cheaper than replacement for the Cam
they ruin themselves because they run off the lifters which round out the fitting that makes them stop working