Always great content. Especially about the all red wiring. Iv got a LS1 in a VK, pulled wiring back oneday to check, all orange was used FML. Cheap arse want to use only one wire colour saving money.
Not a shamble mate, great video. For everyone else here that knows the pain of building cars this happens, I’m half way through getting my car engineered so yes I feel ya.
I can feel your frustrations through the screen haha. Will be worth it man, it's looking super tidy. Been good to see the VN copping the transformation it deserves 👌🏻
when I wasn't sure what pins were what on the loom, instead of undoing everything I just used a multimeter and the ECU pin out diagram to reverse engineer what wire is what. Unplug the loom harness plug, find the pin (say, pin 1 of the crank angle), stick a wire in it, wrap it around one of the multimeter probes, run another long wire from the other problem to each of the pins on the plug and wait for the beep! Love the videos bro, all the little final things are hard, just keep plugging away!
Cheers for the heads up about the pwr steer bracket man, I'm putting one of them pumps in my soarer drift car and was looking for a way to mount the thing
Love all the professional experts in the comments pointing out shit that ain't important or doesn't really matter. Love how every time minjiej has a legit reason lol, keep smashing those vids mate doing a great job being honest and informative hard to find good vids with plenty of info 🤟👍👌
Sooo close now..all that little stuff your doing makes a big difference when uv finished it.even if its just for your own satisfaction knowing it's done right
Sorry to hear that things did not go your planned way " These things to happen in life unfortunately but don't worry you'll get there very soon mate " Cheers take care " Regards from Bill...👍😎 No Fxxxxxx swearing please because I'm a Christian cxxx " Evil Lol ...
Always great content. Especially about the all red wiring. Iv got a LS1 in a VK, pulled wiring back oneday to check, all orange was used FML. Cheap arse want to use only one wire colour saving money.
absolute nightmare
wasnt all over the place this was the best video we got skids vns ss's and powersteering pumps and bob is my auntie
bob is definitely a great auntie
Not a shamble mate, great video. For everyone else here that knows the pain of building cars this happens, I’m half way through getting my car engineered so yes I feel ya.
goodluck with the engineering Josh hope it all goes well
Your videos are so entertaining mate always keen on Wednesday to watch the weekly vids keep up the work
Thanks Blake appreciate it mate
I can feel your frustrations through the screen haha. Will be worth it man, it's looking super tidy. Been good to see the VN copping the transformation it deserves 👌🏻
thanks Jason haha definitely frustrated
I’m pretty sure the required level of footage that triggers people was achieved. Well done. That’s a win.
im here to please
Still was a good vid man I’ve been so keen for the vn stuff I’ve been going back and re watching every vid keep it up man
Awesome! Thank you!
when I wasn't sure what pins were what on the loom, instead of undoing everything I just used a multimeter and the ECU pin out diagram to reverse engineer what wire is what. Unplug the loom harness plug, find the pin (say, pin 1 of the crank angle), stick a wire in it, wrap it around one of the multimeter probes, run another long wire from the other problem to each of the pins on the plug and wait for the beep! Love the videos bro, all the little final things are hard, just keep plugging away!
I enjoyed it and look forward to the next video. 🏁
Thanks Brizza 😁
Never apologize bro we all understand what it's like working on cars and if people don't like it they can get rooted!
haha when you put it like that....
Entertaining and informative as always, cheers mate!
Cheers pal
Cheers for the heads up about the pwr steer bracket man, I'm putting one of them pumps in my soarer drift car and was looking for a way to mount the thing
on the shelf ready to go i beleive
Video was good man
Thanks Mark
Love ya work pal especially Marcus's mums sunglasses
Yeaaaaaah AG Toneeeee!!
Hope your VN has a big cam in it and high stall!
Glad the bumper fit!
Just looking out for ya 😊
Nice work mate
Has no cam at all, going for lite weight
Its tough getting parts at the moment bro, keep chipping away! 👍
I was hoping you had another trash front bar to put on....just to mess with people 🤣
why didnt i think of that
Good vid bud! all over the place can be more entertaining sometimes!
Haha thanks mate
Great video 👍
Thanks mate
Love all the professional experts in the comments pointing out shit that ain't important or doesn't really matter. Love how every time minjiej has a legit reason lol, keep smashing those vids mate doing a great job being honest and informative hard to find good vids with plenty of info 🤟👍👌
Haha that’s just social media in general unfortunately
Keep the hard work up mate
thanks Jordan
Nothing wrong with the video, I enjoyed it. Keep it up my man,looks good to me👍
Awesome thank you!
That vx sounds amazing love seeing other peoples a grade work man the harness is a mess I was hoping for the sweet start up
I thought this was one of your best videos
Your expectations mustn’t be high hahahaha
Can we see a Vx vs Xy video
not even a competition
Hey are both the pullys the same part number?
Nothing wrong with the video bud, great to watch like every other video you have done 👍
Awesome thank you!
For the Astra pump wiring is it just two wires? Power & earth?
Yeah power, earth and 2 triggers. You can wire power and the 2 triggers together if you want it to be always on
Delaying the 2nd trigger activates pump to full speed rather than slowly winding up
correct to all of the above
Stop apologising. Great content, save the apologies for life's real stuff ups!
dont tell me how to live my life! hahaha
$5k on gumtree? I’ll give ya $4k coz your bumper is warped 😂😂
Keep up the good work bro 💪🏼
you drive a hard bargain but ill take it
@@MindieJ sweet. Pick up Saturday 😂😂
Jeez that sounded good…
How are you going to fill it without a hole in the inner gaurd
Same way I fill the trans and brake fluid, Tom Thumb pump
have you ever thought about doing a VT VX build
2 commodores is enough
What brand pump bro
Holden
@@MindieJ sorry what brand is it and what year model Astra will work .thanks ross
Can’t wait to see the vn on the road
just want to lay my seat back with my cap to the side and drive off into the sunset
@@MindieJ yeah fr u must be wanting to drive that thing so bad
Can we maybe get a video on the XY?
When my mates dad lets me haha
Do a video on the old falcon in ya mates shed bud
maybe one day
U can turn a 6pk into a 5pk with a sharp stanly . Instead of continous spacing out. Thus throwing out your alignment 😎👍 keep up the great work brother
that sounds super dodgy haha
For 25% under drive balancers I use 6pk1365 and standard balancers I use a 1410
Thankyou sir!
Gonna have to do a video on Marcus's purple falcon
marcus's dads* dont give him a big head haha
When are you taking the wild violet xy out for a car review video?? 😉😉
When my mates dad lets me haha
love the free lollipop 🍭
nothing beats free shit
What has been done to the vx?
Sounds mint.
Cheers brother & lovin the vn content.
jusy the usual cam, headers, exhaust and intake
Every centimetre counts! 😄
thats what she said
Can't wait to see this car on the princes freeway.
Allen key head bolts for alternator should clear the belt too bro
too tall also unfortunately
Don’t add another washer grab the grinder and shave some of the bracket haha
The only way to do it
Whats your prefered position
Sooo close now..all that little stuff your doing makes a big difference when uv finished it.even if its just for your own satisfaction knowing it's done right
Auspost is terrible at the moment. Good luck getting your stuff soon
youd think after 2 years of covid theyd have got their act together
Sorry to hear that things did not go your planned way " These things to happen in life unfortunately but don't worry you'll get there very soon mate " Cheers take care " Regards from Bill...👍😎
No Fxxxxxx swearing please because I'm a Christian cxxx " Evil Lol ...
they do indeed thanks Bill
I've got 5k waiting lol
have it ready to go
👌
Ayyyy right on time
Mad
Videos algood mate
Ha ha warped 🤡 probs own a Honda
😂😂🤷🏼♂️