Sears Suburban SS16
ฝัง
- เผยแพร่เมื่อ 10 ต.ค. 2023
- One of our recent projects that we wanted to share has been fixing up our Sears Suburban SS16 a little bit. It is by no means a show tractor but we enjoy it and look forward to using it for several yard work projects around the house.
- ยานยนต์และพาหนะ
![เบิ้ล ปทุมราช - อ้ายกินดอง น้องลาบงัว ft. สแน็ก อัจฉรีย์ [OFFICIAL MV]](http://i.ytimg.com/vi/-OK--KaSPcI/mqdefault.jpg)
As an engineer for Roper I have spent many hours on the Suburban. As I remember the SS16 was a single cylinder Tecumseh and the ST16 was the Onan BF-16. Any questions let me know. Sincerely Richard Goodman
Holy cow we've got a celebrity in the house. I have to say the Suburban is just about as perfect of a design as an operator could hope for, so well done to you guys that created it. About 15 years ago it was a '67 Suburban 12 from craigslist that got me hooked on garden tractors. I restored it and used it quite a bit until the IGN coil went sneakers up. Within the last few days I tinkered around and now it's running like a champ again with the original Tecumseh 12.
The things turn tight, the steering is light, the low gear plows like a mule and the top gear gets on down the road and they're simple to work on. All that and a cigar lighter. Like I said, just about a perfect design. 😎
You are correct! It is a great tractor. I remember doing circle track testing where we ran 600 lbs. draw bar load for 600 hours. The only problems we had was tire wear!! Best Wishes, Richard goodman
😎👍
Not sure what the front hub caps were off of but the back ones are, I believe are off an old Studebaker.
⭐
studebaker rear caps, i own a 1948 studebaker champion with the same ones
⭐
nice toy
Studebaker rear hubcaps...babymoon fronts.
⭐
How the hell do you get at the solenoid?
Yours is in a different place than mine is. Mine is under the battery tray. Then again, mine is a different year because my dash is totally different.
th-cam.com/video/O28EYK9OS9M/w-d-xo.html&
Removing the battery provides access to the solenoid.
@@robotacropolis Mine didn't. I removed the battery and the plastic tray only to reach a metal plate that was integral to the sides of the dash and frame. The solenoid was bolted to the underside of that. I couldn't even see it with my phone camera, but did manage to get one hand in there with a 7/16 wrench and luckily got both nuts off the solenoid bracket and moved everything towards the steering column far enough to disconnect all the leads. I rerouted it all to the engine-side of the firewall and mounted the new solenoid there. I think our models are slightly different. Here's mine...
th-cam.com/video/O28EYK9OS9M/w-d-xo.html
@@FixNewsPleaseYou seem to have a newer model. Sorry we couldn't help but we are glad to hear you got it sorted. Very nice GT!