Just so you all know. The servo buddy is back ordered everywhere. AND IS NOT NEEDED. All model years of zx10 with servo/cables you don’t need to “Trick”. The instructions for all years the same. You remove servo cables but leave the servo installed and plugged in. The bike will move the servo as normal and not know the cables and CAT has been removed. This is standard instructions for M4 exhaust. The only reason for running a servo buddy is if you want the extra space. THATS IT.
Also, you can’t gain access to the rider seat super fast and shouldn’t store things there at all while riding. So leave it plugged in. And leave servo, remove the cables. THATS IT. USE BACK SEAT AS STORAGE ONLY!
I got the exact same bike 2023 KRTZX 10. I ran it all last year at the end of the year with an M4 slip on with a cat delete, and you just leave the servo plugged in, but undo the cables. I’m also a technician when it comes to these bikes and I’ve owned eight of these bikes from 2004 to 2023 and any of them that have the servo I’ve always put an M4 exhaust on these bikes and never once had to put a servo buddy on these bikes It’s not even stated in the instructions to do so by M4 . Use your head if it’s still plugged into the servo, then the computer thinks it’s moving cables in the exhaust flap a servo buddy does the same thing just eliminates the box and gives you extra space so if you really think about it, leaving the box in there with the cables on attached it’s still mimicking it turning as of the cables were attached it isn’t rocket science
So, in short terms, that black box, he is taking out can stay in just make sure the cables that go down to the exhaust cat are completely removed, and the knob on that black box will still turn as if the cables are attached no need for a servo buddy this is even per M4 instructions.
@DULLAHGOSOHARD hey man love the channel. I just bought my exhaust and can't wait until it arrives I got the m4 as well. Now can you just unhook the cables from the servo motor? Or do you have to have a servo buddy???
Am coming from a z900 that dont have as much power as this zx10r so all i feel is this bike pull really hard until it hit the Rev limiter i feel no flat spot then again am not a pro rider by any mean and with that said no you dont need to flash the bike if you keeping the db killer in the exhaust but if you remove it the the bike wont run good at low RPM so it might need a tune fore that Also am going to try make a video on the exhaust explaining and showing the difference
More mafia has tuned a couple of zx10r he even has a vid on a brand new 2023 he tunning his tunning is flawless and gets big gains on the 10r I installed akrapovic on mine
@@DULLAHGOSOHARD okay,👍 anyway, very fantastic mod and incredible beautiful sound of the zx10r. Love it and looking forward to more videos about zx10r.😉
Love the video brotha, where’d you pick up the half m4 system at? I just picked my 23 up this Friday. Can’t wait until we get a lil warmer weather next week.
@@APtS_Gh0stHunt3R you should do it you will gain alot from it and the bike will run alot better but you dont have to do it the bike have an oxygen sensor that constantly adjust the air fuel ratio to what the OEM designed it to run
My guy has knees of stone 😂😂😂
Just so you all know. The servo buddy is back ordered everywhere. AND IS NOT NEEDED. All model years of zx10 with servo/cables you don’t need to “Trick”. The instructions for all years the same. You remove servo cables but leave the servo installed and plugged in. The bike will move the servo as normal and not know the cables and CAT has been removed. This is standard instructions for M4 exhaust. The only reason for running a servo buddy is if you want the extra space. THATS IT.
Also, you can’t gain access to the rider seat super fast and shouldn’t store things there at all while riding. So leave it plugged in. And leave servo, remove the cables. THATS IT. USE BACK SEAT AS STORAGE ONLY!
Idk what ur talking about, but when I buy this bike in a couple of months, imma come back to this comment and ask u how to install the exhaust pipe.
Ok I just bought my 2023 Zx10r ktr and it should be here in a week or so and I’m coming back to this comment to tell you if this is true or not
I got the exact same bike 2023 KRTZX 10. I ran it all last year at the end of the year with an M4 slip on with a cat delete, and you just leave the servo plugged in, but undo the cables. I’m also a technician when it comes to these bikes and I’ve owned eight of these bikes from 2004 to 2023 and any of them that have the servo I’ve always put an M4 exhaust on these bikes and never once had to put a servo buddy on these bikes It’s not even stated in the instructions to do so by M4 . Use your head if it’s still plugged into the servo, then the computer thinks it’s moving cables in the exhaust flap a servo buddy does the same thing just eliminates the box and gives you extra space so if you really think about it, leaving the box in there with the cables on attached it’s still mimicking it turning as of the cables were attached it isn’t rocket science
So, in short terms, that black box, he is taking out can stay in just make sure the cables that go down to the exhaust cat are completely removed, and the knob on that black box will still turn as if the cables are attached no need for a servo buddy this is even per M4 instructions.
Awesome Video! Just got my 2023 ZX10R KTR this week! So Looking Forward to getting the M4 Installed!
Keep the db killer in it until you tune the bike because the bike won't run good at low speeds
@DULLAHGOSOHARD hey man love the channel. I just bought my exhaust and can't wait until it arrives I got the m4 as well. Now can you just unhook the cables from the servo motor? Or do you have to have a servo buddy???
@joshuat5140 am not sure if it will throw a code that way but you can try
@DULLAHGOSOHARD yea just curious I bought the servo buddy anyway but was curious. Love the channel.
Awesome bike! Great video too. So glad to see upgrades are relatively easy with the zx10. The KRT livery is growing on me too
That guy made it look easy 😎
Thanks for video man just put M4 slayer on my 2022 zx10r sounds great thanks 😊 ..
Very cool vid.thanks for sharing
Did you need to get an ecu flash after doing this? You deleted the cat which usually causes a flat spot in low-mid range power on the stock fuel map?
Am coming from a z900 that dont have as much power as this zx10r so all i feel is this bike pull really hard until it hit the Rev limiter i feel no flat spot then again am not a pro rider by any mean and with that said no you dont need to flash the bike if you keeping the db killer in the exhaust but if you remove it the the bike wont run good at low RPM so it might need a tune fore that Also am going to try make a video on the exhaust explaining and showing the difference
I knew my man meant business when he had the whole mechanic fit already on 😂
Awesome video bro.
More mafia has tuned a couple of zx10r he even has a vid on a brand new 2023 he tunning his tunning is flawless and gets big gains on the 10r I installed akrapovic on mine
Think i will go with him am going to call him for more details
You wont be disapointed
He got something like a195 HP to the wheel..for what I remember
@@stephenkennedy3145 196hp at wheel with a slip m4 slip on. 188hp at wheel with everything bone stock just ecu flash! It’s amazing.
You made it look easy, Are you going to get it tuned?
new subs bruh clean dn nice video..... and ofcourse the growl of ZX10R is always mesmirizing. RS
Wah gwaan mi boss mi have a zx6r
hey buddy, will it fit zx10 gen 5? because I just bought gen6 .. so I plan to take my gen 5 slip on exhaust for my Gen 6 ..
Question bro did you put any exhaust leak paste before putting m4
No
The exhaust pipe looks so close to the rear swing arm. It may have the risk of scratching the paints somehow.
No i make sure it doesn't touch even when the wheel come off the ground
@@DULLAHGOSOHARD okay,👍 anyway, very fantastic mod and incredible beautiful sound of the zx10r. Love it and looking forward to more videos about zx10r.😉
Thank you!
Wonder if i could just take off the wires and leave the servo buddy so that servo buddy is not required?
You can try that too and see if the check engine light comes on
@@DULLAHGOSOHARDyou replied so fast. Thanks dude. Just ordered a 2024 zx10r nice bike
Good job yard man
Love the video brotha, where’d you pick up the half m4 system at? I just picked my 23 up this Friday. Can’t wait until we get a lil warmer weather next week.
Where can i buy a servo buddy,i have the same bike and all the ones i found only go up to 2022
Check the link in the video description and yes the 2022 will work
Thanks
Please make a video of how to change the OEM fairings to competition fairings, no one has a video showing that !
what is a competition flarings fisrt time hear that but i will look into it
@@DULLAHGOSOHARD the competition body work kits.
Are you going to flash tune the bike?
Some day in the future and I still haven’t flash it yet
How much weight it save
What if you don’t have the servo buddy???
You will have a check engine light if the bike is not tune
Can you take the db killer out?
Yes it can be remove
Where did u get your servo buddy ?
I got it from Amazon link in the description
Nice, uwill need a tune / flash the bike
Do you plan on uploading the video with the db killer out?
Yes
Muito linda essa moto
did you tune it?
No I haven’t
@@DULLAHGOSOHARD iom debating If I need to do a ECU flash or Just do a slip on with the resonator on...
@@APtS_Gh0stHunt3R you should do it you will gain alot from it and the bike will run alot better but you dont have to do it the bike have an oxygen sensor that constantly adjust the air fuel ratio to what the OEM designed it to run
God damn it your rough! If it's your own bike then I got nothing to say... But if that was my bike I'd say move aside I got this!
🏍️🔥
What I didn’t like was that he did everything very rudely... I would never trust my motorcycle to this man!
I don't know why i finished watching it. I don't even have this bike. lol.
Not sure why my cat bolts were very tight couldn’t remove the fucken cat
que serviço mais PORCO esse.....Sem qualquer cuidado com o produto do cliente dele.
部品を落とすなよ 面倒臭い