How To Repair SLOW & STICKING Seat Belts
ฝัง
- เผยแพร่เมื่อ 1 พ.ย. 2018
- Hello Everyone, everyone we are here to show you how to fix your slow and sticking seatbelts. If you are sick of your seat belt getting slammed into your door or not retracting as it should then this is your video.
Throw out your WD-40, PB Blaster along with all your Slick 50 because we found the best Lubricant for EVERYTHING tinyurl.com/bdf6a6ky
We Guarantee you will love it.
________________________________________________
If you would like to help us out.
www.paypal.me/YourSweetProjec...
________________________________________________
Videos:
Seat Belt Cleaning • HOW To Clean SEAT BELT...
Mix For Seat Belt Cleaning • AMAZING Way To SUPER C...
SPC's Air Nozzle • Build a "Sweet Project...
TOOLS:
Old 99 Cleaner amzn.to/39ojQi9
3/8 Torx Bit Set amzn.to/2hGeg0e
Dry Lube amzn.to/2CV0n7o
or
Dry Lube amzn.to/2DpSurx
Air In a Can amzn.to/2JA8URc
Needle Nose Vice Grips amzn.to/2yXFpm8
Mini Picks amzn.to/2zWvXkz
Spin-Off encoreindustrial.com/spin-off-...
Vinyl & Leather Paint amzn.to/2y6vrAB
Vinyl Prep amzn.to/2yjEc9J
Leather Prep amzn.to/2P6nNMX
****Disclaimer****
Due to factors beyond the control of SWEET PROJECT CARS, we cannot guarantee against the improper use or unauthorized modifications of this information. Make sure you check with your manufacturer to make sure this will not affect your factory warranty. SWEET PROJECT CARS assumes no liability for property damage or injury incurred as a result of any of the information contained in these videos. Use this information at your own risk. SWEET PROJECT CARS recommends safe practices when working with tools seen or implied in our video and written content. Due to factors beyond the control of SWEET PROJECT CARS, no information contained on this TH-cam channel shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this content is the sole responsibility of the user and not SWEET PROJECT CARS. - ยานยนต์และพาหนะ
![CAMPปลิ้น | EP.76[2/2] เดินมาสิบกว่าป่า วันนี้รู้แล้วว่าโจโฉกลัวอะไร!](http://i.ytimg.com/vi/R7Yor-t2Au0/mqdefault.jpg)
*****Hello our Great Subscribers and visitors:) We hope this video helps you with your seat belts and coming next week is our EASY seat re-conditioning video:) See you Sunday for the Sweet Reviews Video !!*****
How about adding a warning about pretensioner seatbelts found in some cars. They have an explosive charge that can rip your fingers off, or worse, if you get it wrong.
Loved the split PVC cleaner though, must try that.
We hook the belts over the outside mirror on a nice day to let them dry.
Sweet Project Cars Do you have to take the seats out to fix the seat belts
@Stambo agreed, plus [i] don't know where all the aorbags are. but [I'm] not sure [I] would want to grind dirt into the belt like that. ...Maybe for use after the water rinses clear... another vid suggested compressed air and dry lube on the tensioner.
I have never seen belt care on TH-cam besides washing, And have sought intermittently for years 😐
I really appreciate that you demonstrate how to fix the the things no one messes with. It’s these little things that make you prouder about your ride.
Thank you Brit we appreciate that we always love to help those out there that love their vehicle and love to take care of it have a great night we will see you Friday
This video is right on time! My seat belt just started sticking on my 92 silverado. Thanks for sharing this and all your "trick and affordable ways" to do things.
Glad we could help the 92 Silverado my friend always a pleasure have a great day we will see you Sunday
A two-fer when you consider the belt cleaning add-on video.
Watching you take apart that retractor assembly reminded me of my childhood. My Dad’s attitude was look at it and see how was put together. Take note of any special bolts when disassembling. A human made it with logic, so use that logic to your advantage.
That has stuck with me for years, although now is an old dude, I tend to be a little less adventuresome when it comes to automobile repairs.
You got that right my friend that’s a double whammy right there we always try to have a little bonus is indoor videos so people never know where the good stuff maybe at the beginning middle or end of the video have a great night and we will see you Sunday
Sir, I am doing this today to my 2 front belts! You are amazing thank you for having a video on this!
Love that concoction. Used it on my seatbelt, seat, console, shoes and even my greasy work hat. Works every time. Thanks so much for your time and knowledge.
Thank you stranger danger that means a lot to us we appreciate it more than you’ll ever know have a great day we will see you tomorrow
There aren't many channels I believe deserve TH-cam money but you sir truly deserve a big weekly salary! As always thanks for sharing budget friendly ways to keep our vehicles up!
Dime fever I will say you’re comment is one of the best ones we’ve received. To read your comment really made us feel good here specially when we get so many comments of people calling us names and or telling us our processes don’t work or telling us how we should’ve done it, and then we read yours it makes it all worth it to us to keep putting out good content for those who truly appreciate it have a fantastic night my friend.
I didn't have time to watch the whole video. I just ceramic coated my seat belts. I hope it works like it does for everything else.
What? No joke!?? That belt fix was impressive.
Sorry this is one of those videos we did that we kind of had an attitude as it so irritating when your belt doesn’t retract 😂
Excellent! Best video of this kind I’ve seen, and I’ve watched quite a few as my belt had multiple problems. And your idea for the slit in the PVC pipe for squeezing out the muck was definitely the kicker. Thank you sooo much!!!
Glad it helped Jeff! Thank you for watching and sharing, we truly appreciate it. Have a great day. mad Mike the hammer SPC
The talents we have are gifts - thank you for sharing yours. You are great at teaching. God Bless
BlueDog thank you very much and God Bless you are yours as well my friend :)
My ‘80 Mercedes 450SL has a sticking and locking issue. My older ‘75 Mercedes 450SEL is a-ok. I’ve been thinking about taking the SL’s apart to check it out. My husband’s Nissan truck has really nasty black dirt on the belts. It makes me want to take them out and throw them in the washing machine! His work crew would get food at 7-11 and nasty up the truck. Now it’s our personal vehicle. I’d rather drive my super clean Benzes.
I love your ideas for carpet cleaning!! Thanks!! I can’t wait to do that. Kinda cold in MD right now.
I luv your videos. Thank you for all your hard work. Pls don't let the trolls effect how you present your amazing content.
Thank you Very much for that we appreciate you and you’re very kind words being on TH-cam you really find out that there are really nice people out there and then there are people who are really not very nice and we just come to the conclusion that the mean people are just not happy with their own life
@@SweetProjectCars yeah don't let trolls like me bother you.
We will try not to We have some pretty tough skin here LOL
Hey! SPC, this is really one sweet tip! I can't count how many times I've encountered this problem, now I know what to do! More of the masters knowledge , I love it! Thanks again!
Thank you Frank our great Sweet project cars charter member always a pleasure to see you pop up we will see you tomorrow my friend/Sunday
Wow..thank you..Working on the "Seatbelts" for us was like taking off the Mattress Tag. Great video. My Dad was correct "leave it alone" the "rated G version" , this takes professional to show all of us. Thank you Sir.
kylemlm thank you my friend and for those Tags rip them buggers off LOL
Sir you and your crew are a blessing and an American treasure! Thank you and Happy New Year!!
Great timing! I was actually going to search the Toyota forums for this very issue tonight.
Well you should be all set my friend this will work great for you have a great day we will see you Sunday
Very SweeeeeeeeeT! I’ve gonna try this at home. DIYer from the Philippines
Please do Kuya! Thank you for watching and sharing, have a fantastic day and all the best on your project my friend. mad Mike the hammer SPC
Sweeeeeeeeeeeeeeeet!!! How is it you know EXACTLY what needs attention on my truck everytime!! I was say'n the other day, I really need to take a look at this dragging seatbelt! And here we are!!!! LOL 😁😁😁. Thanks for sharing my good friend(with ESP).
😂😂 Have a Blessed weekend Mike! ☆Jay☆
Thank you Jay we appreciate that and we’re glad we could help you and yes we do have what we call auto ESP we know pretty much all the known issues with these money sucking money pits that we drive around LOL God bless and have a great day my friend
Thanks a million!! I was having this problem in my 08 Dodge ram. this will be fixed this weekend
Are you go just follow the video and you’ll have superior results my friend glad we could help
Definitely something I need to do one the passenger side of the work SUV. The buckle always gets slammed in the door because it retracts so slow.
Thanks for the tips!
Bruce you are so very welcome glad we could help :) mike
Fantastic!!! Great idea on the PVC for the belts too!!
Thank you very much we appreciate that have a great day my friend
I really appreciate your videos. I learn something great with each one. And, I really like how you present them. Thanks for making them.
Thank you Twyla we truly appreciate that and we try to do our best and have fun along the way have a great night my friend
Can’t wait to try the dry lubricant! I may not need to clean the belt, I got a grandma car and she was very meticulous. It’s the cleanest used car I’ve ever seen.
You’ll love the dry lubricant it is awesome it does a fantastic job thank you for sharing have a great night
I just found this channel. Very useful stuff here. I’ll definitely be using these tricks at my car lot. Thanks for posting. 🙂
Subscribed.
Excellent stuff as ever, this is actually a failure in a safety inspection, and think of how useless a loose seat belt would be on a kid in a crash?? Brilliant advice.
True blue thank you so much my friend we truly appreciate that you’re correct you have to keep those seatbelts in tiptop shape unless you wanna be visiting the windshield
That's awesom maybe I'll try this this spring when it's warmer .😁
Thank you Shawn we appreciate that and I’m with you the cold weather is getting on my nerves already and it’s just started LOL thanks Mike
Extra sweet video. Thanks my friend 🤜🏻
Thank you Isaac we truly appreciate that more than you know and thank you for the fist bump and will see you Sunday
I'm still amazed at the helpful videos I find on TH-cam and your video helped me big time I drive a little 2007 hyundai in Ireland and everything in that seat belt assembly was basically the same on my little atoz belt was stuck, 30 minutes after watching this belt out cleaned and lubed up now its perfect again, thanks from Ireland buddy. All the best , subscribed also might get some more great tips from your videos
Thanks guys. I' m gonna try this on my daily.
You’re very welcome Nico make sure you clean them up good and you’ll be all set
Makes sense that dirt buildup would slow down a seat belt. Great tip!
Can you Claude we highly appreciate that always great to see you my friend have a great day we will see you Sunday
This situation plagues me! Thank you so much!
Glad we could help you Brad thank you for your awesome comment have a great night
This problem is so damn annoying. Last summer I pulled the scare strap all the way out, put a hand clamp on it so's not to retract and soaked the whole thing in hot water and Blue Dawn dish detergent and rinsed. Been working like a champ ever since. Good vid guys.
Gary Kovach thank you for sharing my friend mike
sweet, helpful information, thank you for sharing !!
Thank you JOSEPH we truly appreciate that our good friend have a great day and we will see you tomorrow
Hi there..... I don’t know what to say ....you always great and your job is really great 👏👏👏👏👏👏👏👏👏👏
Thank you arrow we truly appreciate that my friend always great to see you have a great night we will see you Sunday afternoon
the wins keep stacking up over here at SPC
Cigar captain good to see you again my friend for working hard we’ve got hundreds of more videos to do yet we just keep picking them up and laying them down
Another great video, maximum respect!
Thank you Jeff we truly appreciate that my friend have a great day and we will see you Sunday
Awesome! Love your videos!
Great video and great tips, thank you, sir!
Hey Robert we truly appreciate that our good friend have a awesome night
Always a great video! Good things to know! Thank you!
Thank you Randal we truly appreciate you stopping by him being a faithful subscriber my friend have a great day and will see you tomorrow
I use turtle wax dry cleaning Agent on my belts and it cleans them well. I rinse it off in a bucket of HOT WATER and it makes the belt clean like new again and it fixes the slow feedback issue
Thank you for sharing have a great day Mike
Really aporeciate your videos!👍
Caz Thank you very much my friend we truly appreciate that it means a lot to us here have a great day and we will see you tomorrow/Sunday
Really appreciate this vid! Thank you!
So glad this helped you thanks have a great day mad Mike sweet project cars
One of the things that makes seat belts slow is the grease and oil from peoples hands. This can make dirt stick to the belt causing the belt to retract slowly. Because the grease and oil (only) mainly gets on the section of belt that comes into contact with the person, you need only to treat this section. A way to do this is to add a few drops of dish washing liquid to very hot water in a saucepan, place the saucepan on the car seat that the belt is for, fully extend the belt and place a light clamp on the belt preventing it from retracting. Place the now floppy belt into the very soapy water and work the soapy water over the belt making sure it gets into the webbing. Let the belt sit over night. The belt should be clean by the following mourning after the soaking - dry off and allow the belt to retract. This should remove the grease, oil and dirt allowing the belt to retract quickly and smoothly...................The End.
Thank you for sharing that’s why we said that cleaning is one of the most important ways to make your belt much faster we have many videos on how we clean them have a great day
Good job my friend!
Thank you splash we truly appreciate that my friend have a great night we will see you Sunday afternoon
Very interesting video il have to try that sometime. Thanx
Very welcome my friend glad we could help have a great night
Great video . i have a jeep that it's seat belts are horrible. Tomorrow I will try this and see if it will work good enough to make the wife happy . like they say happy wife happy home.
She will be very happy if you do this we have the same Saying here happy wife happy life LOL
I like simple ways!
My 05 Subaru Outback has this exact problem. The guy I bought it from was a heavy smoker and I've been trying to get the cigarette stench out of this poor car. I think this guy smoked all the time with the windows up! There's even nicotine in the drivers seat belt webbing! I may just replace this seat belt, I can't get the ashtray smell out of it. Thank you for another Sweeeeeeeet video! Always great advice!
Danny Rumbles I 1000% guaranteed this video will take care of any stench you have th-cam.com/video/h8kenXzYjG8/w-d-xo.html no matter what it is.
Notification swad. Thanks for another awesome new vid!
You very much my friend we truly appreciate that you’re a great subscriber have a great night and we will see you tomorrow
This is easy to do on my 06 nissan frontier,you Rock If it weren't for your help id still be tugging like a dummy on my belt
Glad we could help you Miguel have a great day my friend thanks Mike
thanks for sharing you knowledge!!!
you are very welcome
@@SweetProjectCars yes indeed!!
Thank You!!!!
Dude, you are good! Great video thanks a million outstanding info!!!!! Happy Holidays!!!!!🎅👍🎯🎄💎🎅
Jason that means a lot to us my good friend if you could do us a favor and share our channel that would really help us out
That first minute you had me laughing !! Had to rewatch that again cool...
Billy Tscherne thank you very much my friend :)
Another belted form you guys I was strapped to my seat all the way
Thank you Martin glad we could help you our good friend and Sweet project cars charter member :-)
Great video.... as always!
Thank you very much Sal we truly appreciate that our good friend
Excellent Job ..Thank you for sharing :)
Thank you auto sport we truly appreciate that my friend more than you know
@@SweetProjectCars You are welcome :)
Thanks!
Glad to help, Christopher. Thank you for watching, have a great day. mad Mike the hammer SPC
There are a lot of dry lubes but some have additives which one are you using? Thanks for a great video!
Sam these are our favs amzn.to/2CV0n7o
or amzn.to/2DpSurx all the tool and products are always in the "SHOW MORE" area of the video description, see these pics on how to find the show more for any video on youtube...see static pictures as a guide photos.app.goo.gl/4fbqwpXC3Koqsv8o7 for a
desktop computer or here photos.app.goo.gl/dY6Wz16qnroYHDsK6 for a cell phone thanks Much Mad Mike
Thanks again 🏆👍
John Darwen you are very welcome my friend glad we could help :)
5:08 that's what she said lol. Awesome vid yet again!
Thanks Chad you don’t know how many times I would like to say that but it doesn’t go over well on TH-cam LOL thank you very much for your great comments and we will see you Sunday my friend
Keep up good work, please. I am going to clean my seat belts tommorow - I did not realize it might be needed or even help to wind up them faster. Only after watching this video (and this older one) I am going to clean them Thank you for your sharing your knowledge & experience with us.
You clean those seatbelts up you’ll be surprised how much easier they work and a little dry lube where indicated in the video will really make them work well have a great night my friend
Working on a Honda Accord 2000 sedan and removed the retractor like you showed. Tried taking out the 3 pins from the side cover - see 3:27 - and the retractor spring went Ziiinnnng! So on a Honda, DON'T remove the brown cover!! I had to get another whole belt retractor assembly (the entire belt) from the junk yard. Your Super Clean works GREAT at cleaning dirty belts!! Soaked in 100% for an hour, then rinsed in water with the PVC Squeezer, then soaked again and rinsed. Man, that stuff does the job. Thanks for your help!
Bruce Avilla thanks for sharing and yes all cars are different from the others for sure :)
Awesome
awsome video !!
Scorp thank you very much we truly appreciate that more than you know
Thanks a ton ! ✅👍🏻🇨🇭
Very good job done mate , keep up the good work , Cheers .... :)
Sun6 V thank you :)
👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍AWESOMENESS love this tip and video and you sharing your knowledge because it works
Thank you Brian for all the thumbs up we appreciate that my friend more than you know have a great day and we will see you Sunday
My 1999 Honda Civic belt doesn't retract. I have to assist it up. I'm gonna give this a try. I'm hoping it's just dust and dirt clogging the retraction mechanism. Thanks for sharing!
Sounds like you've got nothing to lose, give it a shot! Thank you for watching and sharing, hope you have a great day and all the best on your project my friend. mad Mike the hammer SPC
Keep smiling Julio
,,,,,,, ,,,,AND,,,,,,,,,,
THANK YOU SIR 🇺🇸
Thanks mate, my Jeep dealer wants me to pay for brand new units. I will be cleaning that ball etc myself.
Hello Scott yes do not pay a dealer to do that you can do it yourself no doubt about it have a great day my friend
You're funny, thank you !
Thank you very much sir ! Hehe
You’re very welcome my good friend
Man you're good!
Thank you filter we truly appreciate that my friend have an awesome night
Cool
Another SWEET video and I will definitely try this on my 1997 Dodge Sport pickup. did you cut the PVC pipe with a hacksaw? Thank you sir! I'm 82 and I need a quick and inexpensive method to fix my old truck! 😊👍😊
Thank you, and yes, we did cut the pvc with the hacksaw. Thank you for watching and asking Roddy, we really appreciate it, have a great weekend and all the best on your project my friend. mad Mike the hammer SPC
I highly recommend disconnecting the pretensioner before doing this. Keep up the great videos!
Thank you Matt we truly appreciate that my friend we try to keep it really simple most people don’t know how to disconnect the pre-tensioner so we make an easy five minute job for them to make their belts move faster have a great day
Sweet Project Cars In that case, you can simply disconnect the negative battery cable about 10 minutes before removing the seatbelt. The pretensioner is a pyrotechnic device.
Matt Wilson thanks much for sharing it really helps everyone :)
The concoction he made at the end is actually mustard gas. Used to make it the same way in Nam.
I have a question I just got a NEW 2019 Jeep Renegade Trailhawk and the seat built is to short for some reason because it doesn't go around a body to good, It is tight fighting. So what do you suggest to fix that problem?
Hopefully you got your issue fixed, but what we would have done was taken it back to the dealership, that sounds like a manufacturing issue my friend. Thanks for watching and asking, hope you have a sweeeeet week. mad Mike & team
@@SweetProjectCars yep I sure did thank you so much
Some videos recommend taking the retractor apart and winding the spring tighter of course all done carefully so that the spring does pop out. Thoughts?
Chris no need to do all of that my friend if you do this video as instructed your belts will work like new again my friend :)
Thanks ..........
Very welcome Rudy glad we could help you my friend we will see you Sunday
Great video my friend but am I missing something..you said use dry lube is that like dry water (not wet lol)..sounds like an oximoran..but I understand what u said about lube collecting dirt so this stuff just super cleans it like the alcohol? ..thx for sharing as always my friend...(Karl)
Hello Karl well if you look in the show more of the video description you’ll find the dry lube that we use that will give you an idea it lubricates without grease it is fantastic stuff for things that you do not want collecting dust and grime
Real tips here
Thank you Jesus we truly appreciate that my friend
Awesome vlog brother
Van Thank you so very much that means a lot to us
Your my favorite detailing specialist on YT
Follow along on them all
Van Inn good deal :) mike
I clean mine every summer haha I'm a freak! 😂
I’m with you my dear we like to have things clean around here go figure LOL always great to see you have an awesome day will see you Sunday
4:52 Thanks for the tutorial
You're very welcome! Have a great day. mad Mike the hammer SPC
Happy 😃 Friday Mike
Thank you Thomas we truly appreciate that my good friend you have a fantastic night and we will see you Sunday afternoon
Sweet Project Cars You Bet my friend Mike . I just marinated some lamb Shank for Sunday afternoon’s BBQ Sweet Project Cars party 🎉 and some cold beer 🍻 too !
Mike , your channel rocks
Thank you Thomas after reading your comment I am now hungry thank you very much for that LOL
I use Super Clean for cleaning everything. Just follow instructions to dilute or use full strength for what ever you are cleaning. It also is good for killing bad odors while cleaning. I mean you can add Oxyclean if you want, not sure if you can but I find just using Super Clean alone will clean and kill odors as the same time. BEST product on the market for getting the job done. Wish I could get paid for promoting it all the time. I tell people all the time.
We love superclean as well and use it quite a bit but with the mixture that we came up with including the oxi clean we have found nothing that cleans as well as that thank you for sharing my friend
YOU ARE THE WIZARD OF OZ OF CARS
Thank you Tony we truly appreciate that our new Sweet project cars charter member have a great Thanksgiving my friend
Awesome! Thanks. I'd rather be fishing :)
I’m with you when I hear that noise I feel like I should be out catching some bluegills about four pounders big enough that I can fillet them out 🐟🐟🐟
More work than it's worth
All depends on who you are talking too as some like to work and tinker with their cars
My friend can you tell me how I get to that assembly in a 2001 Sierra it looks hard cuz cleaning didn't do the trick it locks up it needs some Earl thanks
Best thing you can do is just start taking it apart, find things that can be removed and it will all open up to you. Hope this helps Rob, thanks for watching and asking, have a great day and all the best on your project. mad Mike the hammer SPC
@@SweetProjectCars thank you for the reply I really appreciate it and I do love your voice and your tone and your simplicity on speaking very plain simple English in detailing how to fix a project I also did the cool on my radiator and shoot anyway I meant Day wish I had one like yours in the car frame but now it looks like I had to take the whole back leather off to get to this assembly so that's what I was asking I do appreciate you replying back though keep up the great work 😎😎
Hello, are you located in So. Florida?
We are in the panhandle of FL. Thanks for watching, have a great day. mad Mike the hammer SPC
Rock climbing rope wash is what you want to use on the belt lanyard.
Thanks for watching, have a great day. mad Mike the hammer SPC
You would make a fortune in Ireland 😲
Someday we would love to move to Ireland that’s for sure still not out of the question Have a great day my Irish friend we will see you Sunday
How do I get my belt to stop sticking like the brakes have been hit? Any time on my passenger side when you put the belt on, if you move the belt stops and retracts and sucks ya to the seat! You have to take it off, retract it all the way and then rebuckle, sometimes it works but most of the time you just stay sucked into the seat! Help!
Siama Palkki this is where you have to take the retractor apart and lubricate and clean it or buy a new one, but usually, the dealership will fix it no matter the year and do it for free. thanks, mike
MIND
BLOWN:
SO
DAMN
SWEET!!!!!!!
You very much my friend we truly appreciate that have a great night and we will see you Sunday afternoon
That was easy.
Sweet Ploject Cars. Where you bought your gloves with those faces or figures or whatever you call it. ✌🏽 😎 👍🏼
MMAC. DETAILING IN MOTION all our tools are always in the "SHOW MORE" of the video description amzn.to/2B8kLBh but here they are my friend :)
@@SweetProjectCars Thank you. and also thanks for sharing. ✌🏽 😎 👍🏼
You’re very welcome my friend
Driver side on my 94 Corolla is pulled out all the way and won’t retract. Ideas?
Yes you’ll have to take it completely apart there is most likely a broken ratchet inside