How properly disassemble and reassemble Altaros regulator
ฝัง
- เผยแพร่เมื่อ 15 ก.ย. 2024
- For more information about us, our work and products visit www.altaros.cz/en
TH-cam Audio Library : Echinoderm Regeneration by Jingle Punks from TH-cam Audio Library goo.gl/YmnOAx
Pentagram by Audionautix (audionautix.com)
Excellent simple tutorial! I have been using the Altaros external regulator for my S200 and it works amazingly :-)
Very happy client here!!!!
Would love to know the ...
Durameter of o-rings (how soft or how hard the rubber must be)
And the sizes of o-rings used in the S200 External regulator...
That Sir, would be extremely helpful! :-) :-)
Thank you for your positive review. Large o-rings is 21x2.5 nbr 70 . Small o-rings inside of regulators is 9,25x1,78 NBR 90 and 4x1, NBR 90 and 7x1,5 NBR 70.
@@AirgunRegulator I thank you sir, for taking the time in sending me this regulator o-ring information!! :-)
I have 3 pieces altaros.. but i have same problem too..
Output has goes up when idle position..
Can u give me the arrangement of disc spring thicker n thinner?
Bị tràn áp hoài chán thật.
Is it fit with FX impact?
No, FX impact is unfortunately a different model.
Hi Sỉ,I need
Detailed parameters Altaros oring,Help mẹ Please .tks sir.
Please write to email regulator@altaros.cz and a colleague will send you the information you need .
Airgun Regulator please give me the oring parameter of the Altarros condor voltage regulator
@@xandepi7248 as I once wrote, please write to the e-mail and state the type and age of the regulator, so that we know exactly the type, as we have been doing the regulator for almost 10 years and during that time there has been a development and changes.
what is the plenum siz on you regulator
Most of our regulators have 12CC. it's the most universal size for wide performance range.
@@AirgunRegulator thanks a lot!i have seen you sell a plenum extension that is great.what is the thread size in the frame for most hatsan gun?
@@derivas007 we have an external plenum for our air tank regulator (gunpower, etc). Here is the M18x1.5 thread. Unfortunately, I don't know the thread on the hatsan airtube.
@@AirgunRegulator I will receive my hatsan factor tomorrow. I will check it.