Thanks for this. I've been trying to figure out how to get my humidifier to work with this. I was trying to find spare contacts to switch the 24V. I didn't think to use the ACC to switch the primary of the humidifier control XFMR instead. Much appreciated.
Hi there, I was trying to swap out a board on g20 model but the new board I picked up was bcc replacement kit and was asking to jumper between pin 3&5 and then cut it and wire nut the W1 wire with them. But my question is that if you add a jumper between 3&5 do you get rid of the jumper between 2&4? Thanks
The note that comes with the new BCC3 say if you are replacing a very old BCC3 the terminal size has changed. You have to cut the old male lug off and use the enclosed wire nut to attach the new blue one. The early BCC boards were so flaky (I went through 3 in the first 5 years) I would be surprised if any are left in service
Hello , Sorry but not sure what the DDC1 control is ? Maybe you mean BCC-1 which is the first revision of the 48K98 control board. You should not have any issues using this control but I would suggest getting the updated control 48K98 - BCC3 Circuit Board
Yes, it is used on a pulse furnace. If you have any questions on whether or not it goes on your furnace give us a call at 866-215-3831 and we'll verify the part with your model number.
Thank you!! You time making this was well spent
Take pics multiple if needed!! It was all easy till pins came out of old board and I lost my taught! But overall very easy!
Thanks for this. I've been trying to figure out how to get my humidifier to work with this. I was trying to find spare contacts to switch the 24V. I didn't think to use the ACC to switch the primary of the humidifier control XFMR instead.
Much appreciated.
Good info -- thank you, Steve.
Hi there, I was trying to swap out a board on g20 model but the new board I picked up was bcc replacement kit and was asking to jumper between pin 3&5 and then cut it and wire nut the W1 wire with them. But my question is that if you add a jumper between 3&5 do you get rid of the jumper between 2&4? Thanks
Hi Steve, where is the xtra blue wire come with the package connect to? anyone ca explain howto ues it, will appreciated
The note that comes with the new BCC3 say if you are replacing a very old BCC3 the terminal size has changed. You have to cut the old male lug off and use the enclosed wire nut to attach the new blue one. The early BCC boards were so flaky (I went through 3 in the first 5 years) I would be surprised if any are left in service
can I use a ddc1 board if am replacing DDc2or 3
and whats the difference
am a new tech
great video sir
Hello , Sorry but not sure what the DDC1 control is ? Maybe you mean BCC-1 which is the first revision of the 48K98 control board. You should not have any issues using this control but I would suggest getting the updated control 48K98 - BCC3 Circuit Board
Thank you
yes it's BCC1
great video
alots of good info
is that used on a pulse furnace?
Yes, it is used on a pulse furnace. If you have any questions on whether or not it goes on your furnace give us a call at 866-215-3831 and we'll verify the part with your model number.