i take it you are pleased with your choice? i am considering picking one up for this exact purpose. when i dont want to gear up with the gun belt and glock
Wonderful revolver. Yes, I did some work on it. Removed the redicioulious trigger lock. Replaced the trigger rebound spring, and the hammer spring with the Wilson Combat spring kit. Now with a super smooth 7.5 pound trigger pull. Also replaced the factory grips with a far better contoured checkered rosewood grips. Far easier for speedloaders, and improved the grip without sacrificing any concealment. This is the weapon I carry constantly. No plastic. No strikerfire mechanism. No stovepipes. No slide jambs. No magazine failures. Just 100% wheelgun at it's finest. I wouldn't carry anything else on the market today.
@@dooley05877 Bear in mind that I was a trained and licensed professional gunsmith for 30 years. I specialised in handguns. So the entire operation of changing all the springs and trigger lock removal took less than 30 minutes including a coffee and smoke break. But it's not something that one can do easily if they have no knowledge of the workings of the S&W lock mechanism and the proper tools. There are tiny springs and parts that can pop out of the frame and lost in a flash if you're not careful. It's not going to be accomplished with a couple screwdrivers at the kitchen table. Further, the trigger lock has been said by some to lock up on it's own, but I have never seen this personally. In my case, I removed it more as a result of personal dislike of it, rather than a fear of it's malfunction. If you're not comfortable with it, I'd suggest to leave it alone. I truly doubt that the trigger lock will fail. Of course, anything can malfunction, but again, I have zero data on the lock failure. I hope this helps.
The first gun I bought when I turned 21 was a 642 and have carried it 80% everyday since. The other 20 has been between a 1911 and a super red hawk when hunting. I don’t worry about capacity that much. I love my 642, literally 1000’s of rounds over the last 20 years.
I just got mine today and am in love with the light weight and laser light for accuracy. I initially bought a 9mm but should have gone with the 642 from the beginning. It cost me because I lost 50.00 when I traded it back for this one. Anyway I am very happy with this one.
This gun is, by far, my most favorite everyday carry gun of all time. I have tried other guns, including revolvers and semi autos. But I always come back to my 642. Simple, reliable, super lightweight, easy to draw, and deadly at close range. My son recently timed me at the range and he timed me at 1.5 seconds from the time a threat was identified to first shot downrange. This gun is not easy to shoot, it does require practice time at the range. I had a gunsmith install an Apex spring kit and polish the internals for a much better action. I installed Hogue grips and that made a huge difference at the range! Much less recoil with those grips. It also helps with a quicker, easier draw. Even with the larger Hogue grips, the gun is still easy to conceal. I can carry it 14 hours a day on a hot day with T-shirt and shorts and still barely notice it's even there. Guys, THIS is the real deal. It is a great "always gun".
My 637 has been with me for 18 years. Ergo grips are knuckle friendly. Sent back to sw 15 years ago and refinished in annodized black finish frame with stainless parts au natural. Love it.
@@El_Chuncho you forgot to mention Che was a communist and murderer and coward. The CIA funded him too. They played both sides like they always do but you bought the propaganda pushed upon useful idiots who think communists are people. They aren’t. Have a nice day comrade
Recently got a 642 . Before that I carried a model 37 airweight. I like having the ➕ p rating and snag free. With enough practice, I feel confident . 2" groups at 10 yds all day
Pulled my out of the safe after a couple years of no use, practiced with it, and now it's back in ccw rotation with my P365. Such an amazing and timeless carry gun. I carry it on my ankle while on duty (leo) Great video!
would you feel comfortable with it as your primary carry in off-duty plainclothes? im trying to decide on whether to get one for casual errands and time out when i dont want to don a gunbelt.
@@user-im6fy4qp6m I absolutely feel comfortable carrying it as a primary off duty carry gun, and use it for the exact purposes you mention. Just be sure to practice and become proficient with shooting and reloading it before carrying it.
love my 642, swapped out the grips for some from pachymahr and carry a couple of 7 round speed strips in my back pocket, it's not a easy gun to shoot, but it is easy to carry and 38 special is easy to reload
Great video!! I actually own the 642 S&W .38 myself!! I'm very pleased with it for off duty carry use as a back-up weapon. I love how easily concealable this pistol is it's awesome! I'm now a new subscriber to your channel!
I liked the boot grips, but I put a full grip on my 642 until I learned the gun. I went back to the originals, and practiced more. I just didn't enjoy long sessions because ouch. Then, I put on the Hogue Tamer grip. Wow! I can shoot this thing all day, and it doesn't add too much bulk. Same grip the Ruger LCR has, as I recall from test driving my buddy's.
I did the same thing but used the Tamer grip. But, that is larger than the original. I shot about 400 rounds out of it to get proficient, then back to the boot grip and maybe another 200 rounds.
For about a decade my primary EDC has been a 442. Before that I alternated between a Taurus 85CH and a 3" Smith CS1, that I gave to my son in law for Christmas 2005. I do have several Tupperware 9mms that I occasionally carry. But I always come back to my little Smith. I'm 72 years old retired Army NCO. I have in the past carried many different guns from a Mauser HSc to 1911s and even a Python. But the two times I had to use a gun to defend our home (once in CA and once in Pa) I had a revolver in my hand. Both time it was a Webley MkVI loaded with 45AR. In both instances the individuals with bad intent thankfully immediately left the area without my being forced to shoot anyone. The best possible outcome. These days my every day plan is first avoid those areas most problematic like bars and high crime rate areas and looking like robbing me would not be very profitable. But for those unexpected, unavoidable encounters a 442 in a De Santis pocket holster is mighty comforting.
centennial j frames were my go to for snubby revolvers in the past...mixed it up & got a 638 bodyguard which is my current snubby; one of the major considerations is defense ammo choices...ya gotta load these short barreled Snubbies with loads designed to expand within the proper velocity window!
I’ve got two of these guns and a 442. I swapped out the trigger and hammer springs for the Wilson combat springs. Makes the trigger a couple pounds lighter and easy to shoot. Been carrying this wheels gun for 31 years as a back up on duty.
I got this exact gun a few years ago, brand new, for $300. I put a Wilson Combat spring set in it and it lightened up the trigger pull just a little bit, which is nice because I do not want a light double action trigger. It is a great carry gun. Paint the front blade sight and accept what this gun is, and practice with it.
My 642 lives in my car, so I threw a set of full-size S&W grips on there. It's not fun to practice with at the range, with the boot grip - not with my hands anyway, but getting all 4 fingers on the grip makes a huge difference in comfort, control and accuracy. I see from some other comments that I'm not alone in that preference.
Great revolvers. J frame Centennials have been my go-to for off duty and concealed carry since 1973. I have a Model 40, Model 640 and the 642. The 642 is one of my current primary CC handguns. I recommend replacing the rubber grips. They are comfortable to shoot but they tend to be a little "sticky" and your clothes can hang up on them when bending or getting out of vehicles, leaving your gun exposed. I use regular S&W small grips with a Tyler T-grip adapter. Altamont "Boot grips" are also great. I carry Buffalo Bore .38 Special +P ammo with a 158 gr. lead SWC-HP.
I’ve carried the 642 for 2 years I love it for a jogging gun and a back up mine also has the lovely Scratches and dings on it but to me that’s just the proof that I carry and shoot it so much
Another great video about the Smith & Wesson 642 stainless steel it's just amazing how it shoots especially 38 plus p ammo the older models couldn't handle the plus p just regular 38 I think the stainless steel holds up a lot better especially in warm climate if you could find one new or use buy it they're very hard to come by people buy them a lot 🇺🇲💯👍
Another Great video! Everyone should have one of these! I carry a pair of these every time I'm not carrying a large gun. But this is also one of the most traded in guns because of the recoil. Unfortunately gun salesmen tell women this is the perfect gun. But don't mention the recoil! They also make a great second gun for a 'New York 'reload' When S&W brought back the Centennial after out of product for a long time. I bought the 640 as as soon as my dealer could get one. The recoil is less on the 640 due to its greates weight. So I've been carrying a Centennial since ~ 1990 Cheers
I have a broken wrist currently so I carry a 637 in my left pocket and use it 1 handed. realized I couldn't cure a stovepipe or similar issue on a semi auto with a broken hand. love the 637, wish it was a little lighter
I got a 637 last year, and the only change I made was a Hogue grip. Recoil was really snappy with the factory ones. Things fun to shoot, fits my hand perfectly, and is an awesome backup weapon.
I love my 642 . I swapped out the issue grips for a set of Houge , which are a touch larger. ( I have large hands) and have several speed loaders but prefer speed strips which carry easier. I have an urban undercover and several other holsters both Kydex and nylon.
I've used a 642 as my primary CCW for years. Thankfully I live in a pretty civilized party of the country and don't feel the need for anything more potent until I travel to "the big city."
Saw one today at $499. Came damn close to picking it up. Been thinking about a pocket J frame for a bit now as a back up or a ‘summer carry’. Have a few large frame S&W revolvers which I love. Huge fan of S&W revolvers. I do have my dad’s Colt Detective Special as well but it’s too sentimental for me to carry. That one is more than a tool to me. Thanks again for another thorough and informative review. Love your channel Sir!
My own experience with my CCW Mod 36, your review (and other positive reviews, and Smith reputation, is why I bought my own 642PC. It's now my daily carry.
I have a 642 airweight and I have a night guard that has the built in laser. Both great little guns. Had a trigger job done on the airweight and took it from a 12 lb factory pull to a 5 lb trigger pull, now my daughter uses it for protection. Like everyone else, I’ve changed the grips to something we can hold onto.
@@bonsaw57 , I also have a 686+ that has a 5 lb double action pull. It just makes the gun easier to keep on target. My daughter couldn’t even shoot the 642 with the factory trigger, it was just to heavy. With a set of bigger grips and a lighter trigger, it makes it something she can shoot more accurately. When I took it to my gunsmith, he wanted to know what my purpose was for wanting to lighten the trigger? Once I told him, he took it as far as he was comfortable with going. My daughter and I have fired hundreds of rounds through it, and she is much more confident with it in its current configuration. More than likely I will do the same thing to the night guard revolver.
A 586 isn’t a concealed carry weapon. It isn’t even a duty weapon. Completely different ideas. I would highly suggest not using a trigger so light for duty on a revolver. 8lbs all day. Don’t be that guy who shoots someone unintentionally.
A model 640-2 is my current EDC (,357 magnum) and it vanishes with a good holster under a T-shirt. In colder weather , with more clothing I EDC something else, but in sweltering summer nothing beats a J-frame!
yup. love my 642 with rosewood grips. fits in my pocket great, light... and its a "jam it in some ribs and go to work" gun. not fun to shoot a whole lot due to the dbl action.. but a great CCW gun.
I’ve got the Performance Center Edition which does not have the lock. The trigger is a bit smoother than the base model and it a bit prettier too. It’s been my every day carry in a Desantis pocket holster for several years and I see no reason to change. Sure I’d rather have five more rounds at the ready but in every choice there’s a trade off and I’m comfortable with that one.
I got the pro series w/o the lock that can use moonclips. I like to carry it on long road trips across the country in my vehicle cause it’s easy to load and unload going through states with differing laws and the moonclips keep the ammo all together. 👍🏻
I've been flip flopping between this and an LCR for a backup/easy carry weapon. I was pretty much sold on the LCR, but it's hard to argue against the tried and true 642. Really eyeballing the Performance Center version w/o lock.
This is Hickok 45 favorite pistol. I have had one for 40+ years. Beware: keep your fingers away from the front of the cylinder when shooting. High pressure gases are emitted and they can cause trauma to your hands and/or fingers. Great CCW pistol.
I have the 442 and the 649, love them both but I favor the 442 due to the weight. Wanting to upgrade to the titanium cylinder for more weight savings. Great video!
Get yourself some acrylic paint and paint that front ramp! Made an incredible difference on my 642 and has held up great. White base layer, the neon orange and finished it off with nail polish clear coat.
I was surprised only 10 lb trigger pull. I put a Wilson combat kit in mine and did a little polishing and it made it more tolerable. Easily pocket carry, btw.
Excellent review. S&W also have the fluted hammer versions in J frame for people that want to cock the gun and have a lighter trigger pool and better accuracy plus they are relatively snag free and a bit safer than a completely open hammered version
Same. I used the 14 lb spring from Wilson Combat and it really smoothed the DBL action pull. I have long fingers so the Hogue grip with room for the pinky helped as well.
My 442 Performance Center is one of two guns I will never sell or trade (CZ P07 is other). In Arizona, where I live it is cargo shorts 9 months of the year and nothing is easier to carry and conceal. Fav handgun...
I have both models. Love them. I kept the 442 & gave the 642 to my daughter. Found her’s used with the CT laser grip. Awesome deal. Yes trigger pull was heavy. Wilson Combat makes a nice spring kit. 3 different weight springs. I put the heaviest in her’s & the middle weight in mine. I love VZ Grips. They’re right here in Florida. I get them in 2 days. Can’t go wrong with anything in this video.
I put some Hideout grips by Precision Specialties on mine. They're still small, but have finger grooves with a pinky rest. It's my deep concealment gun.
Interesting pair. For years now, my wife has carried an older 640 and/or her Airweight 460 - that’s a Performance Center version of the 442 that they made 450 of in 1994. It is magna ported. With identical Hogue grips, the ported Airweight still has snappier recoil than the stainless gun. But she prefers carrying that one.😀
I’ve been Carrying S&W M&P Bodyguard with built in Crimson Trace laser 38 Spl +P for years. I had no idea it weighed the same / little less than the AirWeight. 14.5oz. I pocket carry it. Might get a speed loader. Thanks!
The 642 Airweight is one of my favorite carry guns. Especially in the summer when I am wearing shorts and a t-shirt. My gun doesn’t have the internal lock thankfully. The only thing I changed was adding a full size Crimson Trace grip. I carry 2 speed strips in my pockets. Good to go!
I enjoy watching him or his videos are just fantastic he not only shows you how to shoot the gun but he explains every detail about the gun I give this video five stars ⭐⭐⭐⭐⭐💯👍
I picked up one without the trigger lock device a couple years ago at a very sweet price. It's a great pocket rocket. Put the Hogue grips for a full grip on mine.
I carry 442 a TON when it’s hot out. I have the hogue monogrip on it and hit out to 25 yards consistently. These are not just belly guns. They are fully capable. I use underwood 38+p and they are essentially base level 357 mag territory. Recoil is stout but very manageable, even at self defense speeds. I even carry it with hardcast underwood rounds while bow hunting. Mine does have the lock unfortunately but I never use it and never will. I carry a hks speed loader and a speed strip. It’s all lightweight and comfortable. Especially since you can carry with a very minimalist flexible belt due to the light weight.
These things are something of an enigma. My current EDC is an M&P340 which is just a 357 Magnum version of the 442 with pinned front sight. Magnums have some sting behind them, so I tend to stick with +Ps. You would think that in the day of the 365 and Hellcat, there would be no place for a five shot revolver that's about the same size. It seems a lot of people have a different opinion.
As a 30 year old who has carried a Snubbie for almost a decade, I'll say that concealment wise, it's far better than any gun aiwb for me. I shoot Snubbies better than any of those micro guns, but that's just training. People used to give me lots of flak for carrying one.
The trigger can be easily improved with kits from Apex Tactical or Wilson Combat and maybe even wolf gun springs. For $35 or less. Hogue and other manufacturers. Also pocket holsters are a great option for this gun.
When your under no stress that 10 lb pull can bug you, Practice with a man size target at 5 ft in front of you, draw and with both eyes open, one hand only , no aiming put 3 into chest fast as you can. Do this drill until your sick of doing it. Like Sootch says its up close in a real attack, and in a real attack your adrenaline will handle that 10 lb. pull. Ever get a case not fully ejecting in a semi auto? bad news when one second counts, Revolver is always at the ready, with much practice on control you won`t need more than 5 to stop the " Imminent" threat.
I was an Indiana State Parole Officer in the 1990s. We carried the 640 until we switched to Glocks. In retirement I switch back and forth between a 642, a Glock 43 and a Smith 380 EZ.
Either carry 442 or glock 26 feel like them are the two best carry options I have the 43x but feel the 26 shoots a little better at has a bigger capacity n you can manipulate the trigger to almost single action
You do a really fine job on your reviews….. I’m ex-LEO and appreciate nice, quality firearms. I have both the 442 and 642. Being a true citizen, I have more firearms than I can fire a one time. I did attend a rehab where we went around the room, announced our name and affliction……then did a short session on some of the new guns coming out and where we could get them. I can’t recommend this support group enough. And these 2 firearms….442 and 642 are everything Mr. Sootch00 said they are…….absolutely no regrets.
I love my 642-2. I got it gently used a few years ago. I put some Altamont boot grips on it (the factory grip cracked) and that thing has been flawless. Only thing I have noticed that is purely cosmetic is that when i cleaned it with Hoppes no9 solvent whatever coating S&W puts on the stainless finish began to peel off…but again, it was used and already had some nicks on it.
Nice review! 642 is a great choice for a carry gun. Lite weight, very reliable, and a multitude of holster options. I have the 642 performance center model. Has a smoother trigger than the standard model. Also, moonclips allow for super quick extraction and reload.
I bought one of these five years ago as my first handgun as I believed it fit all of my needs, but wow, was it hard to shoot. As a total newbie to this stuff, it was not only hard to handle, but I just didn't feel confident with the idea of carrying it for self defense. It's great to see all of the glowing comments here, but there needs to also be a little dose of reality that this is not the best choice for first-time shooters.
No gun is good to carry for first time shooters. I don’t think first time shooters should even carry at all. It endangers everyone around them including themselves.
On the modern J-frames, I recommen replacing the rubber boot grips with the old-school J-grips. It's not just for looks; the old grips actually allow you to get all fingers on, as opposed to the new ones, which feel like they were made for someone obese to get two fat fingers around.
My wife qualified for her ccw with a 642 Airlight. She's pretty handy with her Mini14 too. So go find a couple different senior citizens to mess with!!!
Ladies or recoil sensitive folks, check out the 43c j frame centenial model looks like 442, but in 22 lr and 8 shots. Great for low recoil, has xs big dot sights. Brand new shooters can even shoot them well, springs break in after first 1000 rounds or dry fires, and becomes much more manageable
The wadcutter is a great self defense round with a lighter recoil and a lighter price. Not my favorite with a speed loader though, difficult to align with the cylinder.
the 637 is great too and i can hit the small swingers with it single action but i always finish up with a double action regular target to check my group
Great video! I haven't been able to use my HKS speedloaders with my 642 AW. I always get hung up on the frame, so I switched to spped strips and Zeta speedloaders. Much easier, at least for me.
My wife is very inexperienced with guns but likes the LCR in 327 Federal loaded with heavy 32 S&W Long loads. Didn't have 32 H&R mag at the time but I bet she could work up to it. That 32 revolver is better for inexperienced shooters in the snubbie configuration. It would be awesome to have in the airweight but LCR is all we get for now.
I hear you. I bought my model 637 new in 2013 for $279.00. Today they want between $500 and $600 for these same Air Weights. I cannot get myself to pay nearly double just because of the (scam) pandemic and supply chain dilemma. It's ridiculous. I wanted to add a 638 or 642 to my collection but not now.
You called the 642 a good B/U gun but would you consider it a good primary weapon for a retiree who’s orbits are pretty tame? I’ve carried a J Frame of one stripe or another (sans lock) as an EDC since my ‘97 retirement.
I have one of these. Good little shooter for its size. I have old school walnut grips with a grip spacer on the front strap. Its only real flaw is that speedloaders get hung up on the cylinder release, so I use speed strips, or soft speedloaders.
Great little gun. I bought one used in great condition for $275.00 up here in the New England about 3 years ago. They’re about $200.00 more now. Might not be the best gun to carry as far as firepower, but it’s so easy to carry, that it’s the gun that you’ll most likely take with you, especially this time of year. I usually put a bigger grip on it during the winter, but put the factory one back on in the summer for pocket and IWB carry. Great review as usual 👍
I have a 3" Kimber k6. It's 6 shot, .357, and has jewel-like engineering. It's also twice the price of the SW 642. Is it that much better than the 642? That's a judgment call. I've tried the 642, and I really like it. It might be my next firearm.
I had one of those and carried it in an Alessi ankle holster. Best thing was the holster most comfortable carry ever, sold it because I couldn't hit the broad side of a barn with that lil snubbie. Nice video.
My first gun for cc was a Springfield 911 I’ve only shot a few hundreds rounds through but numerous times I’d get a failure to feed or the slide would lock back even if there was still ammunition. Not sure if fire arms have a “break in period” and I was shooting cheap target loads but, even still after that I just couldn’t bring myself to carry it. So I got an air weight.
@@memphis2houston346 I like ruger myself as far as stout durability. Just my opinion though. If your Just looking for 1 revolver and not going to get the itch to buy more guns that is... lol
Mines a model 442. It's combat proven! After carrying my 442 for over 10 years, I was forced to protect my wife and myself from a would be rapist and thief. And did so successfully. He died. Police said good job. I upgraded the grips to a pachmyer set. Up close and personal it is accurate and deadly. But that is just my experience. Oh, I do carry a speed loader in my pocket.
@@johnochicago8457 I was using cheap lead ball ammo. Just .38 special, not plus p. The whole encounter happened within 3-10 feet. Kill shot was to his liver as I was firing from the ground up at him. After the shot he dropped his weapon, started running away and he dropped like a rock about 50 yards away. Police said good job Gene, one less bad guy. Oh, I found out after he was only 15 years old.
Warning: There is a Giveaway Scam posting in the comments using my thumbnail. I am not on Telegram. Please report them. Thanks.
But they said I’d win a fabulous prize,...
First prize: one-year supply of Hillary Clinton posters.
That junk is all over the place now.
This pistol has been my “run to the store “ pistol for at least 10+ years
I got the lcp max as my edc
Do you live in the hood?
@@RobertPeru2749 Why would you say that? Anything can happen at anytime, anywhere and the neighborhood doesn’t matter
i take it you are pleased with your choice? i am considering picking one up for this exact purpose. when i dont want to gear up with the gun belt and glock
@@user-im6fy4qp6m I’m very pleased! You can’t go wrong
I had a 642 and sold it. Always regretted it. I bought a bodyguard 38 but that wasn’t the same. I finally bought another 642 and I am happy again.
I did the same thing. Try out the M&P340 if you get a chance, it's my favorite j-frame.
why
I started to buy m@p body guard instead got 642 I'm glad
Wonderful revolver. Yes, I did some work on it. Removed the redicioulious trigger lock. Replaced the trigger rebound spring, and the hammer spring with the Wilson Combat spring kit. Now with a super smooth 7.5 pound trigger pull. Also replaced the factory grips with a far better contoured checkered rosewood grips. Far easier for speedloaders, and improved the grip without sacrificing any concealment. This is the weapon I carry constantly. No plastic. No strikerfire mechanism. No stovepipes. No slide jambs. No magazine failures. Just 100% wheelgun at it's finest. I wouldn't carry anything else on the market today.
How hard is the trigger lock to remove? When I carry my 442 I always have that in the back of my head that it's going to lock itself or something.
@@dooley05877 Bear in mind that I was a trained and licensed professional gunsmith for 30 years. I specialised in handguns. So the entire operation of changing all the springs and trigger lock removal took less than 30 minutes including a coffee and smoke break. But it's not something that one can do easily if they have no knowledge of the workings of the S&W lock mechanism and the proper tools. There are tiny springs and parts that can pop out of the frame and lost in a flash if you're not careful. It's not going to be accomplished with a couple screwdrivers at the kitchen table.
Further, the trigger lock has been said by some to lock up on it's own, but I have never seen this personally. In my case, I removed it more as a result of personal dislike of it, rather than a fear of it's malfunction. If you're not comfortable with it, I'd suggest to leave it alone. I truly doubt that the trigger lock will fail. Of course, anything can malfunction, but again, I have zero data on the lock failure. I hope this helps.
@@anangryranger I actually just did it myself , took around 20 minutes. Not bad at all. Thanks!
@@dooley05877 Outstanding! Glad to hear that. Obviously you've got a nack for this! Well done sir!👍
You can even buy plugs to fill up the hole after you removed the lock.
Its pretty wild how many people still rock and love these. I Love mine also without the lock.
The first gun I bought when I turned 21 was a 642 and have carried it 80% everyday since. The other 20 has been between a 1911 and a super red hawk when hunting. I don’t worry about capacity that much. I love my 642, literally 1000’s of rounds over the last 20 years.
I just got mine today and am in love with the light weight and laser light for accuracy. I initially bought a 9mm but should have gone with the 642 from the beginning. It cost me because I lost 50.00 when I traded it back for this one. Anyway I am very happy with this one.
@@ErlindaC62 I'm just curious, did your 642 come with the keylock?
@@Revolverman38 you can buy them without
The 642 would be a great backup to the Super Redhawk while hunting. A little something in reserve.
I doubt they'll hold up to thousands of rounds. I'd have the lockwork rebuilt.
This gun is, by far, my most favorite everyday carry gun of all time. I have tried other guns, including revolvers and semi autos. But I always come back to my 642. Simple, reliable, super lightweight, easy to draw, and deadly at close range. My son recently timed me at the range and he timed me at 1.5 seconds from the time a threat was identified to first shot downrange. This gun is not easy to shoot, it does require practice time at the range. I had a gunsmith install an Apex spring kit and polish the internals for a much better action. I installed Hogue grips and that made a huge difference at the range! Much less recoil with those grips. It also helps with a quicker, easier draw. Even with the larger Hogue grips, the gun is still easy to conceal. I can carry it 14 hours a day on a hot day with T-shirt and shorts and still barely notice it's even there. Guys, THIS is the real deal. It is a great "always gun".
My 637 has been with me for 18 years. Ergo grips are knuckle friendly. Sent back to sw 15 years ago and refinished in annodized black finish frame with stainless parts au natural. Love it.
For reloaders...148 wc upside down over 4 gr of 231. Now that's a hollowpoint.
Back in the 70's i got a model 60 then 38spec, smith offered banana grips for the j frame. Anyone remember the grip.
Advise please.
@@alexpocs8649 It's spam...
Finally someone who knows how to wear a che gavera shirt properly. Nicely done
Most definitely! Thanks Brother
Yeah I also like extra ventilation.
?
@@El_Chuncho yea wasn’t sure why he was shooting it, thanks for the explanation 🙏
@@El_Chuncho you forgot to mention Che was a communist and murderer and coward. The CIA funded him too. They played both sides like they always do but you bought the propaganda pushed upon useful idiots who think communists are people. They aren’t. Have a nice day comrade
I went shooting my 642 this morning. It's my current go to carry pistol for summer. Just got some hogue grips for it so I can get a pinky on it.
How much.
@@jonhawkins7510 I paid $30 for my hogue grips for my 442 off Amazon
@@jonhawkins7510 $25 at the local store
Wasting your money, they are supposed to be small and concealable, if you want a bigger grip get a gun with a bigger grip.
@@fuzz6938 its still the lightest revolver. God forbid he increases its shootability by adding .25 inches to the bottom of the Grip.
Recently got a 642 . Before that I carried a model 37 airweight. I like having the ➕ p rating and snag free. With enough practice, I feel confident . 2" groups at 10 yds all day
Pulled my out of the safe after a couple years of no use, practiced with it, and now it's back in ccw rotation with my P365. Such an amazing and timeless carry gun. I carry it on my ankle while on duty (leo) Great video!
would you feel comfortable with it as your primary carry in off-duty plainclothes? im trying to decide on whether to get one for casual errands and time out when i dont want to don a gunbelt.
@@user-im6fy4qp6m I absolutely feel comfortable carrying it as a primary off duty carry gun, and use it for the exact purposes you mention. Just be sure to practice and become proficient with shooting and reloading it before carrying it.
love my 642, swapped out the grips for some from pachymahr and carry a couple of 7 round speed strips in my back pocket, it's not a easy gun to shoot, but it is easy to carry and 38 special is easy to reload
Great video. I've had a 640 .357 for about 15 years and carried it A LOT. I've been considering one of these for a few years now.
Great video!! I actually own the 642 S&W .38 myself!! I'm very pleased with it for off duty carry use as a back-up weapon. I love how easily concealable this pistol is it's awesome! I'm now a new subscriber to your channel!
I liked the boot grips, but I put a full grip on my 642 until I learned the gun. I went back to the originals, and practiced more. I just didn't enjoy long sessions because ouch. Then, I put on the Hogue Tamer grip. Wow! I can shoot this thing all day, and it doesn't add too much bulk. Same grip the Ruger LCR has, as I recall from test driving my buddy's.
Naaaaah, original crappy smith grips that kill your middle knuckle finger or go home. be a man
I did the same thing but used the Tamer grip. But, that is larger than the original. I shot about 400 rounds out of it to get proficient, then back to the boot grip and maybe another 200 rounds.
I always swap out the original grips, and install the Hogue grips it's much more comfortable for me due to my large hands
For about a decade my primary EDC has been a 442. Before that I alternated between a Taurus 85CH and a 3" Smith CS1, that I gave to my son in law for Christmas 2005. I do have several Tupperware 9mms that I occasionally carry. But I always come back to my little Smith. I'm 72 years old retired Army NCO. I have in the past carried many different guns from a Mauser HSc to 1911s and even a Python. But the two times I had to use a gun to defend our home (once in CA and once in Pa) I had a revolver in my hand. Both time it was a Webley MkVI loaded with 45AR. In both instances the individuals with bad intent thankfully immediately left the area without my being forced to shoot anyone. The best possible outcome. These days my every day plan is first avoid those areas most problematic like bars and high crime rate areas and looking like robbing me would not be very profitable. But for those unexpected, unavoidable encounters a 442 in a De Santis pocket holster is mighty comforting.
centennial j frames were my go to for snubby revolvers in the past...mixed it up & got a 638 bodyguard which is my current snubby; one of the major considerations is defense ammo choices...ya gotta load these short barreled Snubbies with loads designed to expand within the proper velocity window!
I’ve got two of these guns and a 442. I swapped out the trigger and hammer springs for the Wilson combat springs. Makes the trigger a couple pounds lighter and easy to shoot. Been carrying this wheels gun for 31 years as a back up on duty.
I got this exact gun a few years ago, brand new, for $300. I put a Wilson Combat spring set in it and it lightened up the trigger pull just a little bit, which is nice because I do not want a light double action trigger. It is a great carry gun. Paint the front blade sight and accept what this gun is, and practice with it.
My 642 lives in my car, so I threw a set of full-size S&W grips on there. It's not fun to practice with at the range, with the boot grip - not with my hands anyway, but getting all 4 fingers on the grip makes a huge difference in comfort, control and accuracy. I see from some other comments that I'm not alone in that preference.
living in your car is a good way to get it stolen..
Wow, good job. That way someone will break into your car and steal your gun and rob some stores.
@@mattarchey4436 is that how you talk to everybody or just strangers?
@@Tom-cp6yj get a car safe like everyone else dummy
Great revolvers. J frame Centennials have been my go-to for off duty and concealed carry since 1973. I have a Model 40, Model 640 and the 642. The 642 is one of my current primary CC handguns.
I recommend replacing the rubber grips. They are comfortable to shoot but they tend to be a little "sticky" and your clothes can hang up on them when bending or getting out of vehicles, leaving your gun exposed. I use regular S&W small grips with a Tyler T-grip adapter. Altamont "Boot grips" are also great.
I carry Buffalo Bore .38 Special +P ammo with a 158 gr. lead SWC-HP.
where can i find these different grips and for the 637 , well i guess they should fit all j frames
I’ve carried the 642 for 2 years I love it for a jogging gun and a back up mine also has the lovely Scratches and dings on it but to me that’s just the proof that I carry and shoot it so much
Another great video about the Smith & Wesson 642 stainless steel it's just amazing how it shoots especially 38 plus p ammo the older models couldn't handle the plus p just regular 38 I think the stainless steel holds up a lot better especially in warm climate if you could find one new or use buy it they're very hard to come by people buy them a lot 🇺🇲💯👍
Another Great video!
Everyone should have one of these!
I carry a pair of these every time I'm not carrying a large gun.
But this is also one of the most traded in guns because of the recoil.
Unfortunately gun salesmen tell women this is the perfect gun. But don't mention the recoil!
They also make a great second gun for a 'New York 'reload'
When S&W brought back the Centennial after out of product for a long time.
I bought the 640 as as soon as my dealer could get one.
The recoil is less on the 640 due to its greates weight.
So I've been carrying a Centennial since ~ 1990
Cheers
Nate and his GZDeals team are great to work with. This, or a 357 cousin, is such a temptation to round out the inventory. Thanks, Don!
Thanks Dave! Nate is a real blessing. Either in 38 Special or 357 mag would be good to go.
I purchased a 642 for my grand daughter after getting a new Performance Center 642 for myself. Love the moon clips.
I have a broken wrist currently so I carry a 637 in my left pocket and use it 1 handed. realized I couldn't cure a stovepipe or similar issue on a semi auto with a broken hand. love the 637, wish it was a little lighter
Always appreciate your efforts, Sir. You're the best. Take care.
I got a 637 last year, and the only change I made was a Hogue grip.
Recoil was really snappy with the factory ones. Things fun to shoot, fits my hand perfectly, and is an awesome backup weapon.
Same here plus a lil nail polish on the sight. Can’t go wrong.
Get the wilson combat spring kit for this thing. Makes a world of difference
I love my 642 . I swapped out the issue grips for a set of Houge , which are a touch larger. ( I have large hands) and have several speed loaders but prefer speed strips which carry easier. I have an urban undercover and several other holsters both Kydex and nylon.
The only challenge is that with the Hogue grips it is a little harder to conceal.
The 642 Pro Series does not have the key lock and its cut for moon clips. It is a 100$ more though.
I've used a 642 as my primary CCW for years. Thankfully I live in a pretty civilized party of the country and don't feel the need for anything more potent until I travel to "the big city."
Same here. Speed strips for refills. Iwb or owb? What holster is your favorite? Thx
I just love mine. I adore revolvers. All of my semis leave me with a tiny bit of reliably doubt. Grit and grime often causes cycling issues.
I'm glad that this is still one of the few models that S&W offers without the internal lock.
I love a good airweight revolver in 38 special. Great video.
Saw one today at $499. Came damn close to picking it up. Been thinking about a pocket J frame for a bit now as a back up or a ‘summer carry’.
Have a few large frame S&W revolvers which I love. Huge fan of S&W revolvers.
I do have my dad’s Colt Detective Special as well but it’s too sentimental for me to carry. That one is more than a tool to me.
Thanks again for another thorough and informative review. Love your channel Sir!
I have the performance center model 642. Has a great trigger. I magnaported mine and it’s really nice.
I milled the blade out and installed Big dot sights ,Sights greatly improved on the 642
Magnaport on a sub 2" tube... You can probably almost run faster than the bullet!! 🤣🤣🤣
@@robertrosenberg6354 still 830 fps through the chrono
I have a s&w 637 it's Been my carry gun 90% of the time for the last 10 years. I have many other Carrie guns but I always go back to the J frame .
My own experience with my CCW Mod 36, your review (and other positive reviews, and Smith reputation,
is why I bought my own 642PC. It's now my daily carry.
I have a 642 airweight and I have a night guard that has the built in laser. Both great little guns. Had a trigger job done on the airweight and took it from a 12 lb factory pull to a 5 lb trigger pull, now my daughter uses it for protection. Like everyone else, I’ve changed the grips to something we can hold onto.
5lb trigger on a double action seems dicey, sir
@@bonsaw57 , I also have a 686+ that has a 5 lb double action pull. It just makes the gun easier to keep on target. My daughter couldn’t even shoot the 642 with the factory trigger, it was just to heavy. With a set of bigger grips and a lighter trigger, it makes it something she can shoot more accurately. When I took it to my gunsmith, he wanted to know what my purpose was for wanting to lighten the trigger? Once I told him, he took it as far as he was comfortable with going. My daughter and I have fired hundreds of rounds through it, and she is much more confident with it in its current configuration. More than likely I will do the same thing to the night guard revolver.
The night guards were so cool. Such a shame they aren’t in production any more.
Bad move on that trigger pull.... Sorry.
A 586 isn’t a concealed carry weapon. It isn’t even a duty weapon. Completely different ideas. I would highly suggest not using a trigger so light for duty on a revolver. 8lbs all day. Don’t be that guy who shoots someone unintentionally.
A model 640-2 is my current EDC (,357 magnum) and it vanishes with a good holster under a T-shirt. In colder weather , with more clothing I EDC something else, but in sweltering summer nothing beats a J-frame!
yup. love my 642 with rosewood grips. fits in my pocket great, light... and its a "jam it in some ribs and go to work" gun. not fun to shoot a whole lot due to the dbl action.. but a great CCW gun.
I’ve got the Performance Center Edition which does not have the lock. The trigger is a bit smoother than the base model and it a bit prettier too. It’s been my every day carry in a Desantis pocket holster for several years and I see no reason to change. Sure I’d rather have five more rounds at the ready but in every choice there’s a trade off and I’m comfortable with that one.
The clinton lock broke on the 26th shot on my new revolver. Just more to go wrong. I will never buy another s&w.
@@tedcollins4684 I call the lock "the Hilary hole" lol
I love my 642. Pocket carry, or iwb carry. It's just hard to beat any J frame
I got the pro series w/o the lock that can use moonclips. I like to carry it on long road trips across the country in my vehicle cause it’s easy to load and unload going through states with differing laws and the moonclips keep the ammo all together. 👍🏻
I've been flip flopping between this and an LCR for a backup/easy carry weapon. I was pretty much sold on the LCR, but it's hard to argue against the tried and true 642. Really eyeballing the Performance Center version w/o lock.
Go for it, you won't regret it. I carry mine All the time great bug 🇺🇸
@@Revolverman38 😁 Went with the .357 LCR. The 642 is high on the list though when I get the urge to get another one.
@FroZenNinja Great choice, now you can shoot both 357, 38spl. Enjoy 🇺🇸
I Have The Ruger LCR
In .38, With The CT Laser
Grip's, It's A GREAT Carry
Weapon...
This is Hickok 45 favorite pistol. I have had one for 40+ years. Beware: keep your fingers away from the front of the cylinder when shooting. High pressure gases are emitted and they can cause trauma to your hands and/or fingers. Great CCW pistol.
I have the 442 and the 649, love them both but I favor the 442 due to the weight. Wanting to upgrade to the titanium cylinder for more weight savings. Great video!
Get yourself some acrylic paint and paint that front ramp! Made an incredible difference on my 642 and has held up great. White base layer, the neon orange and finished it off with nail polish clear coat.
I was surprised only 10 lb trigger pull. I put a Wilson combat kit in mine and did a little polishing and it made it more tolerable. Easily pocket carry, btw.
Excellent review. S&W also have the fluted hammer versions in J frame for people that want to cock the gun and have a lighter trigger pool and better accuracy plus they are relatively snag free and a bit safer than a completely open hammered version
Love mine especially after I installed the Wilson Combat spring kit so smooth.
Same. I used the 14 lb spring from Wilson Combat and it really smoothed the DBL action pull. I have long fingers so the Hogue grip with room for the pinky helped as well.
My 442 Performance Center is one of two guns I will never sell or trade (CZ P07 is other). In Arizona, where I live it is cargo shorts 9 months of the year and nothing is easier to carry and conceal. Fav handgun...
This is my edc iwb carry. Its so comfy I often forget its there.
I have both models. Love them. I kept the 442 & gave the 642 to my daughter. Found her’s used with the CT laser grip. Awesome deal. Yes trigger pull was heavy. Wilson Combat makes a nice spring kit. 3 different weight springs. I put the heaviest in her’s & the middle weight in mine. I love VZ Grips. They’re right here in Florida. I get them in 2 days. Can’t go wrong with anything in this video.
The spring kits are a must to take this from a good gun to a great gun
I put some Hideout grips by Precision Specialties on mine. They're still small, but have finger grooves with a pinky rest. It's my deep concealment gun.
Interesting pair. For years now, my wife has carried an older 640 and/or her Airweight 460 - that’s a Performance Center version of the 442 that they made 450 of in 1994. It is magna ported. With identical Hogue grips, the ported Airweight still has snappier recoil than the stainless gun. But she prefers carrying that one.😀
my favorite summertime carry in a sticky holster! and it's light enough for a backup too.
Good review!! Classic model and great reliability. I was a proud dad, when my daughter asked for one on her birthday.
I’ve been Carrying S&W M&P Bodyguard with built in Crimson Trace laser 38 Spl +P for years. I had no idea it weighed the same / little less than the AirWeight. 14.5oz. I pocket carry it. Might get a speed loader. Thanks!
The 642 Airweight is one of my favorite carry guns. Especially in the summer when I am wearing shorts and a t-shirt.
My gun doesn’t have the internal lock thankfully. The only thing I changed was adding a full size Crimson Trace grip. I carry 2 speed strips in my pockets. Good to go!
I enjoy watching him or his videos are just fantastic he not only shows you how to shoot the gun but he explains every detail about the gun I give this video five stars ⭐⭐⭐⭐⭐💯👍
I picked up one without the trigger lock device a couple years ago at a very sweet price. It's a great pocket rocket. Put the Hogue grips for a full grip on mine.
I carry 442 a TON when it’s hot out. I have the hogue monogrip on it and hit out to 25 yards consistently. These are not just belly guns. They are fully capable. I use underwood 38+p and they are essentially base level 357 mag territory. Recoil is stout but very manageable, even at self defense speeds. I even carry it with hardcast underwood rounds while bow hunting. Mine does have the lock unfortunately but I never use it and never will. I carry a hks speed loader and a speed strip. It’s all lightweight and comfortable. Especially since you can carry with a very minimalist flexible belt due to the light weight.
I own a model 637 snubby. Awesome piece!
These things are something of an enigma. My current EDC is an M&P340 which is just a 357 Magnum version of the 442 with pinned front sight. Magnums have some sting behind them, so I tend to stick with +Ps. You would think that in the day of the 365 and Hellcat, there would be no place for a five shot revolver that's about the same size. It seems a lot of people have a different opinion.
As a 30 year old who has carried a Snubbie for almost a decade, I'll say that concealment wise, it's far better than any gun aiwb for me. I shoot Snubbies better than any of those micro guns, but that's just training. People used to give me lots of flak for carrying one.
@@bkcatalog I make no apologies for my choice.
The trigger can be easily improved with kits from Apex Tactical or Wilson Combat and maybe even wolf gun springs. For $35 or less. Hogue and other manufacturers.
Also pocket holsters are a great option for this gun.
When your under no stress that 10 lb pull can bug you, Practice with a man size target at 5 ft in front of you, draw and with both eyes open, one hand only , no aiming put 3 into chest fast as you can. Do this drill until your sick of doing it. Like Sootch says its up close in a real attack, and in a real attack your adrenaline will handle that 10 lb. pull. Ever get a case not fully ejecting in a semi auto? bad news when one second counts, Revolver is always at the ready, with much practice on control you won`t need more than 5 to stop the " Imminent" threat.
I was an Indiana State Parole Officer in the 1990s. We carried the 640 until we switched to Glocks. In retirement I switch back and forth between a 642, a Glock 43 and a Smith 380 EZ.
Either carry 442 or glock 26 feel like them are the two best carry options I have the 43x but feel the 26 shoots a little better at has a bigger capacity n you can manipulate the trigger to almost single action
Just picked up a mint SW 642 with the crimson trace grip for $420 at my local pawnshop 😎
You do a really fine job on your reviews…..
I’m ex-LEO and appreciate nice, quality firearms.
I have both the 442 and 642.
Being a true citizen, I have more firearms than I can fire a one time.
I did attend a rehab where we went around the room, announced our name and affliction……then did a short session on some of the new guns coming out and where we could get them.
I can’t recommend this support group enough.
And these 2 firearms….442 and 642 are everything Mr. Sootch00 said they are…….absolutely no regrets.
Good work. Thank you. I bought mine because I can fire it from a coat pocket and shoot 5 times. Semi-auto won't do that with any reliability.
I love my 642-2. I got it gently used a few years ago. I put some Altamont boot grips on it (the factory grip cracked) and that thing has been flawless. Only thing I have noticed that is purely cosmetic is that when i cleaned it with Hoppes no9 solvent whatever coating S&W puts on the stainless finish began to peel off…but again, it was used and already had some nicks on it.
It is perfect for a jacket poket! Both of them, great honest Review!
Nice review! 642 is a great choice for a carry gun. Lite weight, very reliable, and a multitude of holster options. I have the 642 performance center model. Has a smoother trigger than the standard model. Also, moonclips allow for super quick extraction and reload.
I just got one. Loving it! Any recommendations on a IWB holster?
I bought one of these five years ago as my first handgun as I believed it fit all of my needs, but wow, was it hard to shoot. As a total newbie to this stuff, it was not only hard to handle, but I just didn't feel confident with the idea of carrying it for self defense. It's great to see all of the glowing comments here, but there needs to also be a little dose of reality that this is not the best choice for first-time shooters.
No gun is good to carry for first time shooters. I don’t think first time shooters should even carry at all. It endangers everyone around them including themselves.
On the modern J-frames, I recommen replacing the rubber boot grips with the old-school J-grips. It's not just for looks; the old grips actually allow you to get all fingers on, as opposed to the new ones, which feel like they were made for someone obese to get two fat fingers around.
Agreed especially if you are lucky to have an M-40 lemon squeezer!! Best of both worlds! Wish Smith would make it again!!
Did this on my 442, changes the gun for the better for sure. Thinner profile too.
I just ordered some traditional wood grips for my model 37. I've wondered how different it would feel from the stock rubber grips.
My wife qualified for her ccw with a 642 Airlight. She's pretty handy with her Mini14 too. So go find a couple different senior citizens to mess with!!!
Ladies or recoil sensitive folks, check out the 43c j frame centenial model looks like 442, but in 22 lr and 8 shots. Great for low recoil, has xs big dot sights. Brand new shooters can even shoot them well, springs break in after first 1000 rounds or dry fires, and becomes much more manageable
The wadcutter is a great self defense round with a lighter recoil and a lighter price. Not my favorite with a speed loader though, difficult to align with the cylinder.
I have the 638. Shrouded hammer, good to go for single or double action.
I have the 638 air weight. I love the single action option
the 637 is great too and i can hit the small swingers with it single action but i always finish up with a double action regular target to check my group
Great video! I haven't been able to use my HKS speedloaders with my 642 AW. I always get hung up on the frame, so I switched to spped strips and Zeta speedloaders. Much easier, at least for me.
My wife is very inexperienced with guns but likes the LCR in 327 Federal loaded with heavy 32 S&W Long loads. Didn't have 32 H&R mag at the time but I bet she could work up to it. That 32 revolver is better for inexperienced shooters in the snubbie configuration. It would be awesome to have in the airweight but LCR is all we get for now.
Like mine bought it 7 yrs ago at a gun show $299.00 brand new I wish I had bought 2
I hear you. I bought my model 637 new in 2013 for $279.00. Today they want between $500 and $600 for these same Air Weights. I cannot get myself to pay nearly double just because of the (scam) pandemic and supply chain dilemma. It's ridiculous. I wanted to add a 638 or 642 to my collection but not now.
Same hear bought mine at a gun show 299.00 about 7yrs ago
You called the 642 a good B/U gun but would you consider it a good primary weapon for a retiree who’s orbits are pretty tame? I’ve carried a J Frame of one stripe or another (sans lock) as an EDC since my ‘97 retirement.
I have one of these. Good little shooter for its size. I have old school walnut grips with a grip spacer on the front strap. Its only real flaw is that speedloaders get hung up on the cylinder release, so I use speed strips, or soft speedloaders.
Zeta 6.
This is the perfect "walk the dog" gun, kept in a pocket holster. With a crimson trace laser grip it is PERFECT for this use.
I love snub nose revolver's. Long live the republic, Sootch00 !!!!!!!!!
Great little gun. I bought one used in great condition for $275.00 up here in the New England about 3 years ago. They’re about $200.00 more now.
Might not be the best gun to carry as far as firepower, but it’s so easy to carry, that it’s the gun that you’ll most likely take with you, especially this time of year.
I usually put a bigger grip on it during the winter, but put the factory one back on in the summer for pocket and IWB carry.
Great review as usual 👍
I just ordered a new 442 from Egunco for $329. Couldn't resist it at that price.
I have a 3" Kimber k6. It's 6 shot, .357, and has jewel-like engineering. It's also twice the price of the SW 642. Is it that much better than the 642? That's a judgment call. I've tried the 642, and I really like it. It might be my next firearm.
Sooch!
You're the Man, brother. Thanks for another great video. Be of good courage.
I had one of those and carried it in an Alessi ankle holster. Best thing was the holster most comfortable carry ever, sold it because I couldn't hit the broad side of a barn with that lil snubbie. Nice video.
My first gun for cc was a Springfield 911 I’ve only shot a few hundreds rounds through but numerous times I’d get a failure to feed or the slide would lock back even if there was still ammunition. Not sure if fire arms have a “break in period” and I was shooting cheap target loads but, even still after that I just couldn’t bring myself to carry it. So I got an air weight.
It's crazy you made this video I've been thinking of buying either this or a 357! Have never owned a wheel gun
I'd suggest. 357 since you can shoot .38s out of it if you like, or .357 magnum. But you can't have both options with a .38
@@MJ-om8nw my thoughts exactly 🤝
@@memphis2houston346 I like ruger myself as far as stout durability. Just my opinion though. If your Just looking for 1 revolver and not going to get the itch to buy more guns that is... lol
Revolvers are THE Most reliable firearms around.
Mines a model 442. It's combat proven! After carrying my 442 for over 10 years, I was forced to protect my wife and myself from a would be rapist and thief. And did so successfully. He died. Police said good job. I upgraded the grips to a pachmyer set. Up close and personal it is accurate and deadly. But that is just my experience. Oh, I do carry a speed loader in my pocket.
What ammo were you using for this encounter? Were they plus p? If I have to use it I'll feel better knowing it worked with that ammo. Thanks!!!!
@@johnochicago8457 I was using cheap lead ball ammo. Just .38 special, not plus p. The whole encounter happened within 3-10 feet. Kill shot was to his liver as I was firing from the ground up at him. After the shot he dropped his weapon, started running away and he dropped like a rock about 50 yards away. Police said good job Gene, one less bad guy. Oh, I found out after he was only 15 years old.
@@genesmith6512 Thanks Gene and outstanding job!!!!