Word of advise... don't clean up with dish detergent. The detergent cuts grease and dries up the oils from the clear coat destroying it little by little. Simply wash like normally using car shampoo but without carnauba. If not avilable, simply use hair shampoo which works fairly well in cars and then clean with rubbing alcohol but don't use dish washing soap
Stretch the whole wrap first and squeegee it and flatten it out and then cut with one swift and slow motion motion, instead of cutting flattening and tucking, cutting should be the last step, along with heat. Looks really good tho
No u dont have too remove. While the spoiler is on it has so much space to grip and pull and play with the wrap it is so much difficult and uneasy process if you take the spoiler off.
To cut straight lines with the overhang put a squeegee underneath the flap and cut though the vinyl into the squeegee.
Word of advise... don't clean up with dish detergent. The detergent cuts grease and dries up the oils from the clear coat destroying it little by little. Simply wash like normally using car shampoo but without carnauba. If not avilable, simply use hair shampoo which works fairly well in cars and then clean with rubbing alcohol but don't use dish washing soap
When you were using the cutter to remove the excess wrap how did u make sure that you don't scratch the paint on the car?
Drip some links in the description of where ypu purchase the items including the carbon fiber
Which carbon fiber you use? 3D, 4D or 6D???? Can u send me the link please
nice job nice car
How come you didnt use the Buffer on the squeegee?
How long did that wrap last it look like ez wrap
That is looking pretty clean!
Watch CK wraps...nothing against this guy. Gotta start somewhere. 🍻
Walang hatak kahit konte, baguhan mg install haha,, pero nice tips n sa newborn
What if it’s a h spoiler
U should have stretch from the middle to the end for both sides.. so that the vinyl wraps around the spoiler anyway good job
Stretch the whole wrap first and squeegee it and flatten it out and then cut with one swift and slow motion motion, instead of cutting flattening and tucking, cutting should be the last step, along with heat. Looks really good tho
what size is that??
Which brand did you use?
Should use the felt side of the squeegee.
Next you need to do the tail light bezels and the chevy badge
good job bro
How much did this cost? Just tinted my tail lights and wanna do this but black
Philip backer you can buy 5ft x 1ft for about 7$ on eBay
Best thing would be to remove the spoiler for best results. But he did an excellent job without removing it.
No u dont have too remove. While the spoiler is on it has so much space to grip and pull and play with the wrap it is so much difficult and uneasy process if you take the spoiler off.
Looks good! I just got my 6th gen wrapped in an insane color. Check it out on my channel
That was painful to watch.
Oh man thanks sad, carbon fiber wrap 😂😂🤦🏻♂️