Hi Eugene! Just finished my 4 Stroke 7G Motorized Bicycle today thanks to your TH-cam Videos. It started on the second pull. I've had it up to 30MPH already. Couldn't have done it without you! Beats my 2 Stroke hands down. Thanks again!
I like old-school coaster brake on rear and if you have $150 use a hub brake on the front wheel. Second choice is caliper. Discs wear fast in motorized use. I like the heavier rims on the Huffy Cranbrook and I like the Hyper too. If you have the $$$, buy both and use the Cranny wheels
I need a motor mounting bracket at least 16" long. I have a firmstrong beach cruiser and the seat post and front post just above the bike chain is that far apart. What are my options?
out standing job buddy love your videos you do a great job showing people how to build these take care stay safe out there . p.s what is the best way to hook up E-trike bike ????
Where do you recommend buying 4 stroke engines from ? Also how do you feel about Harbor Freight motors ? If you think they are ok for bikes which size do you recommend ?
+LV Streeter (LVstreeter) motorizedbicycleenginekits.com/ . Harbor freight engines are lower RPM and they will not go as fast w/o removing the governor and modifications
+HoustonMotorized ok that's great.. I'm planning to order from gas bikes but the total comes to like 400 cad.. do you know where I can get the ghost racer cheaper in Canada? thanks
Alvi I. use bed rail cut them 3 in longer than the. mounting plate .so you can. put bolts fount and back of the down tube the middle down tube .drill four holes to mout the motor too
Hi Houston Thumbs up. Im from Cape Town South Africa. 4 stroke motors are available here, unfortunately I cannot find the Clutch and Gear assembly. Do you think we can ship down?
Dude have seen many of your assemblies. you said to cut the kill switch wires off .I say NEVER!!!!!! When you have a carb mess up and stick wide open you will not have time to reach down to find the kill switch on the motor. If you hit even a chuck hole things happen very fast,or could blow the motor. I have had the return spring break and the cable end popped out. Very glad I had mine installed I was in traffic. boy that was an eye opener!!!!! SAVE LIFES DON'T KILL THE KILL SWITCH
Hola soy de honduras y tengo el mismo problema con el clutch que se come la fibra,esa parte la venden en amason y ya compre una nueva,pero es la misma calidad de fibra,creo que ire donde enfibran los frenos ahi por el mercado medina de san pedro sula,pero me gusta mas el de dos tiempos 80cc.no tienen ese problema ,aunque no es tan bonito como el de 4 tiempos y tengo dos motores con ese problema del clutch.
hey I was wondering where can you get the detergent oil that you need For this motor? also do you have to break it in when you just get it and do I need to get the break in oil for it can you please help me I've been trying to figure this out and I'm just getting frustrated thank you
@@HughesMotorized I do help the motor pedaling ,but I am little on the heavy side so I can smamell the burning of the pads , so the other bikes,maybe is the quiality of the motor ,but in amason many people will talk about the same problem,maybe is the black fiver ,maybe replacing with car quiality fiver ,can you please make a video explaining this situation.thanks for your videos again.
Ummm. NO. Ever hear of GMC? (General MOTORS) Ford MOTOR Company? MOTORsports? Why are motorcycles called MOTORcycles? Why is the Department Of Motor Vehicles called The Department of MOTOR Vehicles? What is a MOTORized Bicycle? Psst. It's not absolute.
Hi Eugene! Just finished my 4 Stroke 7G
Motorized Bicycle today thanks to your TH-cam Videos. It started on the second pull. I've had it up to 30MPH already. Couldn't have done it without you! Beats my 2 Stroke hands down.
Thanks again!
glad to help
Just got my 4 stroke and will be using your fantastic video series as a guide to help with my installation.
+JERRYR708 Awesome. Good luck
What type engine is this I want to buy one
Do you have where to buy kit for crank upgrade fuel tank etc, Thanks
What’s up the different Leave drive sprocket shaft? Been trying to replace mine and the transmissions I get have the short shaft?
What sprocket mfg.works with the supplied 44tooth sprocket?
Looking to do my 1st 4 stroke build, cruisers - coaster brake or caliber brake model? Of the Walmart selection - Hyper or Huffy? Models?
I like old-school coaster brake on rear and if you have $150 use a hub brake on the front wheel. Second choice is caliper. Discs wear fast in motorized use. I like the heavier rims on the Huffy Cranbrook and I like the Hyper too. If you have the $$$, buy both and use the Cranny wheels
how do u take the long studs out of the 4 stroke muffler housing 2 put a different muffler on
Do any of the manufacturers offer a kick start to replace the recoil starter?
very good video.
I need a motor mounting bracket at least 16" long. I have a firmstrong beach cruiser and the seat post and front post just above the bike chain is that far apart. What are my options?
out standing job buddy love your videos you do a great job showing people how to build these take care stay safe out there . p.s what is the best way to hook up E-trike bike ????
I'd say build your own
Can you replace just the shaft and use the original bearings and screw cups or do you need the whole kit?
Yes on standard cruisers. These ones use the same bearings & cups as stock: amzn.to/2ZT1fYZ
Hey houston what would be a good muffler to make it quiet as a car?.
The stock mufflers are very quiet. So, leave it is my advice
@BlueWise NinjaOwl I heard them.
Where do you recommend buying 4 stroke engines from ?
Also how do you feel about Harbor Freight motors ? If you think they are ok for bikes which size do you recommend ?
+LV Streeter (LVstreeter) motorizedbicycleenginekits.com/ . Harbor freight engines are lower RPM and they will not go as fast w/o removing the governor and modifications
LV Streeter not from flying horse
LV Streeter book online and get yourself a 4-cycle Honda motor you can never go wrong with Honda
What rear sprocket would you recommend for something like a 3hp briggs and stratton?
+Lucas Winders Id try a 44 tooth and go from there
Did you grease those bearings?
that was soooooooo many beers ago. I mean years ago. I'm sure I did
will this fit on a huffy cranbrook with out needing to make a custom engine mount?
+Alvi I Pretty easy install. You will have to file and gring on black mounts to get correct alignment. Other than that easy enough
+HoustonMotorized ok that's great.. I'm planning to order from gas bikes but the total comes to like 400 cad.. do you know where I can get the ghost racer cheaper in Canada? thanks
Alvi I. use bed rail cut them 3 in longer than the. mounting plate .so you can. put bolts fount and back of the down tube the middle down tube .drill four holes to mout the motor too
Nice build
Hi Houston Thumbs up. Im from Cape Town South Africa. 4 stroke motors are available here, unfortunately I cannot find the Clutch and Gear assembly. Do you think we can ship down?
Were can i get the kit and how much are they i want a phone number to call about buying one
Dude have seen many of your assemblies. you said to cut the kill switch wires off .I say NEVER!!!!!! When you have a carb mess up and stick wide open you will not have time to reach down to find the kill switch on the motor. If you hit even a chuck hole things happen very fast,or could blow the motor. I have had the return spring break and the cable end popped out. Very glad I had mine installed I was in traffic. boy that was an eye opener!!!!! SAVE LIFES DON'T KILL THE KILL SWITCH
my motor have a problem were cluth.and i don't find parts in ebay..can you put some link were can i buy it please..I say hi from Honduras
Hola soy de honduras y tengo el mismo problema con el clutch que se come la fibra,esa parte la venden en amason y ya compre una nueva,pero es la misma calidad de fibra,creo que ire donde enfibran los frenos ahi por el mercado medina de san pedro sula,pero me gusta mas el de dos tiempos 80cc.no tienen ese problema ,aunque no es tan bonito como el de 4 tiempos y tengo dos motores con ese problema del clutch.
Over gas link no air haul
I guess for demonstration purposes you didn't lube the pedal bearings.
I truly forgot. You nailed me for good
what brand bike did you use
To even the motor mounts how much u grind them the back mount is way off I Thight them they hang down
Hi I've watched your builds for a few years wanted to know if you build 2 stroke bikes if so how much are your builds when completed
What type of chrome bike was that?
Kıröm biyşikle
Great Job Bro !!!
hey I was wondering where can you get the detergent oil that you need For this motor? also do you have to break it in when you just get it and do I need to get the break in oil for it can you please help me I've been trying to figure this out and I'm just getting frustrated thank you
standard automotive 30wt or 10w30 will do
Whi my motor "eats" the clutch pads ?
might be misalignment of clutch bell?
@@HughesMotorized thanks I will check ,but we just bought 10 of this motors and all have the same problem,maybe quality of the pads fiver?
@@josuemelara5085 are you using only the motor to start bikes moving? That will burn clutch pads. Pretty solid on all that I've had./
@@HughesMotorized I do help the motor pedaling ,but I am little on the heavy side so I can smamell the burning of the pads , so the other bikes,maybe is the quiality of the motor ,but in amason many people will talk about the same problem,maybe is the black fiver ,maybe replacing with car quiality fiver ,can you please make a video explaining this situation.thanks for your videos again.
whats the difference between 4g 5g or 7g
4th generation, 5th generation....
7g I know has a shorter shaft for the drive sprocket so it's stronger.
I see you have that crapy rear sprocket "rag" type setup. That sucks. But your motor setup looks nice.
I'm pretty good at setting up the ragjoint. My daily rider for 5 years is doing fine. Just jave to master it. I've done 300 by now
That's very impressive.
10 inch to centimeters
i tight fit is a good fit!
I have a 20" folding bike with no top bar. I never fold it.
Engine = gas or diesel. Motor = electric.
Ummm. NO.
Ever hear of GMC? (General MOTORS)
Ford MOTOR Company?
MOTORsports?
Why are motorcycles called MOTORcycles?
Why is the Department Of Motor Vehicles called The Department of MOTOR Vehicles?
What is a MOTORized Bicycle?
Psst. It's not absolute.
@@HughesMotorized Neither is ignorance. Have a good day.
@@richardp6178 Have a good one sir. Just don't even get me started on what MOTOR oil is used for.
@@richardp6178 explain what you mean
u ma big dwg