I don't always carry a knife but I do keep an "EMS" type shears (scissors) with me. They will cut through anything, harness straps, slack fishing line, even cut thin aluminum with them before and they don't seem to ever get dull.
I don’t use back plate but have a couple of different BC jackets and one of them lacks of D rings and the few it has are in such an awkward place. However the rubber bands ideas is gonna be a way to fix some issues I’m having. Thanks a lot! Cheers Mate 👌🏻
Sorry about the late response, somehow I missed your reply. I've seen people use these on BCDs with less d-rings than they want. They're a little harder to hit with your bolt snap then a large d-ring, but if you aren't constantly using that piece of gear 9like a DSMB or other suface signaling device) then they should work well. www.amazon.com/Acrux7-Carabiner-Stainless-Carabiners-Connector/dp/B07CWNYGK3/ref=sr_1_14_sspa?dchild=1&keywords=detachable+d+ring+stainless&qid=1623088161&sr=8-14-spons&psc=1&smid=A1J3S7TLE8VWXU&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUEyQkdGQlU4STk1UEQxJmVuY3J5cHRlZElkPUExMDM0NDUzRTdYTUNOVlhKVzBJJmVuY3J5cHRlZEFkSWQ9QTAxODYzNDQzUVgySjJFTTRJMTM0JndpZGdldE5hbWU9c3BfbXRmJmFjdGlvbj1jbGlja1JlZGlyZWN0JmRvTm90TG9nQ2xpY2s9dHJ1ZQ==
@@DiveVibe thanks a lot for your response. I’m happy to read your message as few days ago I went to a place here in Australia (Bunnings Warehouse) and got myself a pair of these carabiners and work just fine.
Just found your channel and subscribed, great video. Do you know where I could find those clip-on lights I clicked on the link in the video but they're not available.
www.divegearexpress.com/dgx-300-mini-light-kit Here you go! You have to attach the clip yourself. It's called a bolt snap, for lights like this I use a size small and I attach it with cave line (braided nylon line) or a zip tie if im in a hurry. Thanks!
How about replacing nylon cable ties (sun oxidizes) with stainless steel? Also, using LCD inspection camera to view the inside of bladder of BCD ( vest, wing, etc.? )
Hi, great video! On which plate is you Apeks wing mounted? Apeks is out of stock for plates in Europe and I have no idea which alternative brand I could mount the wing on...
Mine is deep outdoors, but just about any wing will work. Hollis, Dive Rite, Halcyon, and most others should work. I do recommend a single tank adapter, a lot of wings these days have "stabilizers" but they just don't work as well as a single tank adapter.
@@DiveVibe Thanks a lot for taking the time to answer! My dilemma came from the fact that I was unsure whether the cam band slots for the wing and the plate would align or not.
Any tips on adding attachment points to recreational jacket BCDs? I need more clip off points or need to add a D ring inside one of my pockets at least
Stainless steel quick links are your best friend for adding attachment points on rec BCDs. Just search "quick link" on Amazon and make sure they're stainless steel.
Weight plates from dripstone diving. The dude who designed them, sold the idea to xs scuba. So now they're easy to get. www.divegearexpress.com/highland-weight-plates-pair
@@DiveVibe Thank you! I just got a setup like the one you were using to show your hacks - I have the 5 lb stainless plate but still have to add air to my wing to stay off the bottom (my lungs aren't enough). I think I'll switch it out for the aluminum and add a 2lb to the tank or something. Any other suggestions?
Great tip with the rubber bands. Love the channel 😁 I recently returned from Mexico, spent 2 months diving the cenotes of the Riviera Maya, these are now under threat from the" tren Maya" a railway under construction that will loop 1500km from Cancun to Tulum, cutting through the jungle and directly over the cenote river system. The environmental impact on this sensitive biosystem will be catastrophic, there is nowhere else in the world quite like it. Although work is suspended for the moment ( due to action from a group of cave divers) the Mexican president is keen for the railway to be completed by December 2023. Would it be possible for you to do a video about this issue to raise awareness among the diving community. Many thanks👍
You asked for video ideas: Go do some deep wreck Tech dives, preferable military wrecks. Gear reviews but only for the most popular items in each gear category, not a bunch of stuff no one wants. Subscriber get togethers for diving or lecture or dinner hang out. Good luck.
Great video, I'm new to diving and just bought a BCD, your tips are extremely helpful. I subscribed and look forward to more of your videos.
That idea for the snorkel is fantastic!!! Thanks!
I don't always carry a knife but I do keep an "EMS" type shears (scissors) with me. They will cut through anything, harness straps, slack fishing line, even cut thin aluminum with them before and they don't seem to ever get dull.
Great idea
great tips!
trilobite cutters also have pouches that slide on to the BC straps, very handy.
And ceramic blade never rusts!
Love that snorkel tip!
Snorkel idea is amazing ❤
Great job! I like the bolt snap trick.
Thanks Ernie! I find it very useful.
nice work man, love the added comedy lol
Thanks Scott! I'm glad you enjoyed it.
I don’t use back plate but have a couple of different BC jackets and one of them lacks of D rings and the few it has are in such an awkward place. However the rubber bands ideas is gonna be a way to fix some issues I’m having. Thanks a lot! Cheers Mate 👌🏻
What brand and model? I might be able to come up with something a little better.
Mares Origin. Is the older model of the one that comes with a side pocket power inflator instead of an ergo with power inflator hose.
Sorry about the late response, somehow I missed your reply.
I've seen people use these on BCDs with less d-rings than they want. They're a little harder to hit with your bolt snap then a large d-ring, but if you aren't constantly using that piece of gear 9like a DSMB or other suface signaling device) then they should work well.
www.amazon.com/Acrux7-Carabiner-Stainless-Carabiners-Connector/dp/B07CWNYGK3/ref=sr_1_14_sspa?dchild=1&keywords=detachable+d+ring+stainless&qid=1623088161&sr=8-14-spons&psc=1&smid=A1J3S7TLE8VWXU&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUEyQkdGQlU4STk1UEQxJmVuY3J5cHRlZElkPUExMDM0NDUzRTdYTUNOVlhKVzBJJmVuY3J5cHRlZEFkSWQ9QTAxODYzNDQzUVgySjJFTTRJMTM0JndpZGdldE5hbWU9c3BfbXRmJmFjdGlvbj1jbGlja1JlZGlyZWN0JmRvTm90TG9nQ2xpY2s9dHJ1ZQ==
@@DiveVibe thanks a lot for your response. I’m happy to read your message as few days ago I went to a place here in Australia (Bunnings Warehouse) and got myself a pair of these carabiners and work just fine.
Just found your channel and subscribed, great video. Do you know where I could find those clip-on lights I clicked on the link in the video but they're not available.
www.divegearexpress.com/dgx-300-mini-light-kit
Here you go! You have to attach the clip yourself. It's called a bolt snap, for lights like this I use a size small and I attach it with cave line (braided nylon line) or a zip tie if im in a hurry. Thanks!
@@DiveVibe Thank you for the quick reply and the link.
@jodeci8883 no problem! Here's the bolt snap as well: www.divegearexpress.com/dgx-s-s-swivel-eye-3-0-in-7-6-cm-small-sliding-bolt-snap
Great video and helpful thank you as I'm just started up diving again 😊
Glad it was helpful! Thanks Wayne!
How about replacing nylon cable ties (sun oxidizes) with stainless steel?
Also, using LCD inspection camera to view the inside of bladder of BCD ( vest, wing, etc.? )
Great tip!!
In my "ouch pouch" I carry (1) Cat 7 tourniquet,(1) swat-t tourniquet,(1) vile of Divesoft Fluorescein Marker Dye,and a glass survival mirror.
QUEST.- How much was the mini dive light?
Where did you purchase it?
Thanx.
They have them at Dive Gear Express for 50 bucks. www.divegearexpress.com/dgx-300-mini-light-kit
Great content.. thank you
Thank you! I appreciate the kind words.
Could you please share the link of the diving flashlight (compact torch)
Thanks
www.divegearexpress.com/dgx-300-mini-light-kit
Here you go!
Hi, great video! On which plate is you Apeks wing mounted? Apeks is out of stock for plates in Europe and I have no idea which alternative brand I could mount the wing on...
Mine is deep outdoors, but just about any wing will work. Hollis, Dive Rite, Halcyon, and most others should work. I do recommend a single tank adapter, a lot of wings these days have "stabilizers" but they just don't work as well as a single tank adapter.
@@DiveVibe Thanks a lot for taking the time to answer! My dilemma came from the fact that I was unsure whether the cam band slots for the wing and the plate would align or not.
Yep. Your local bike shop will be HAPPY to give you as many used bike innertubes as you can carry. It's not only the frugal choice, YOU'RE RECYLING!
Technically it's reusing not recycling but still environmentally friendly
Wow, that is amazing!
Great video
Thanks friend!
More vids pease I have a Hollis K2
Any tips on adding attachment points to recreational jacket BCDs? I need more clip off points or need to add a D ring inside one of my pockets at least
Stainless steel quick links are your best friend for adding attachment points on rec BCDs. Just search "quick link" on Amazon and make sure they're stainless steel.
Nice hacks! how you hold the snorkel to the plate 🤔 I could not see 🥺 thanks!
Just regular old zip-ties! If you pull hard and fast, they break easily.
@@DiveVibe also useful to know if you're ever kidnapped....
Great video! Very usefull
Thanks Robert!
What are you using to hold those small weights on your straps? some kind of parachute cord or is that a wire type cord? Thanks
Weight plates from dripstone diving. The dude who designed them, sold the idea to xs scuba. So now they're easy to get. www.divegearexpress.com/highland-weight-plates-pair
@@DiveVibe Thank you! I just got a setup like the one you were using to show your hacks - I have the 5 lb stainless plate but still have to add air to my wing to stay off the bottom (my lungs aren't enough). I think I'll switch it out for the aluminum and add a 2lb to the tank or something. Any other suggestions?
Awesome hacks bro 🤙
Thanks BAMF SQUAD!
You should replace your zip ties on your snorkel with bungee. That’s how I roll
Great tip with the rubber bands.
Love the channel 😁
I recently returned from Mexico, spent 2 months diving the cenotes of the Riviera Maya, these are now under threat from the" tren Maya" a railway under construction that will loop 1500km from Cancun to Tulum, cutting through the jungle and directly over the cenote river system.
The environmental impact on this sensitive biosystem will be catastrophic, there is nowhere else in the world quite like it.
Although work is suspended for the moment ( due to action from a group of cave divers) the Mexican president is keen for the railway to be completed by December 2023.
Would it be possible for you to do a video about this issue to raise awareness among the diving community.
Many thanks👍
That's a great idea. I had heard grumblings about the railway, but I had no idea the situation was so dire. Thanks for bringing this to my attention.
Hell yeah dude! Pumped on your channel. See you in K-town next week! Gonna come down from Alaska and warm up from all this ice diving.
Hell yeah man!
Great hacks, I personally just wouldn't recommend zipties. I would love to see a part two, I'm sure you got few hacks more since this one. 👌👍
You asked for video ideas: Go do some deep wreck Tech dives, preferable military wrecks. Gear reviews but only for the most popular items in each gear category, not a bunch of stuff no one wants. Subscriber get togethers for diving or lecture or dinner hang out. Good luck.
Thanks! I definitely need to do a wreck trip!
He has a to cool for school kinda vibe. LOL
Lol