Ryft Trans2 speed Fix
ฝัง
- เผยแพร่เมื่อ 21 ก.ค. 2024
- This one requires a bit of tool work with grinding some material away from the shift fork. Be careful when you do it. Hopefully this fixes many issues out there with this kit.
Ryft 2-speed kit
Amain bit.ly/3qLxBjb
Ebay ebay.us/bqlJbt
Vitavon Skid
Ebay ebay.us/YOlyHu
Other Vitavon parts on ebay, also email me at Exocagedrc@yahoo because I may have what you need in stock, I only ship in the USA.
Linkset ebay.us/hyVhBQ
Diff Lockers ebay.us/8jdMiJ
Input Shaft ebay.us/3SXIcT
Transmission case ebay.us/lUSkiY
Swaybar ebay.us/yIxchm
Rear Axle Shafts ebay.us/VtmO6E
Front Axle Shafts ebay.us/TK7cuM
Servo Armor Guard ebay.us/QGujcc
Knuckles ebay.us/dUkiPG
Diff Cup ebay.us/65hqe9
Axle housings ebay.us/hQjkdS
Rear Steer Mirror housing ebay.us/kYmCtR
Castle Mamba X
Amain
Ebay ebay.us/1lJSId
Castle Monster x
Amain bit.ly/2TTSZ9I
Ebay ebay.us/mrMiHq
ServoAF Drag Link Servo Saver
www.servoaf.com/product/drag-...
Axial Ryft RTR
Amain bit.ly/3heMd7W (Orange)
Amain bit.ly/3tzOFbR (Black)
Amazon amzn.to/33vhFqE (Orange)
Amazon amzn.to/3heDClW (Black)
Ebay ebay.us/Nbxd6X (Orange)
Ebay ebay.us/TJCwRV (Black)
Horizon bit.ly/3o1ihO5 (Both)
Reefs Raw500 servo
Amain bit.ly/2TqX44Q
Ebay ebay.us/fdDkd8
CHANNEL MEMBER INFO
If you would like to be a channel member now's the time! I will start a monthly giveaway in a direct paypal payment in the amount of TWICE your monthly membership fees, they are $1.99, $4.99, $9.99 and for the big guys $24.99. So you could win $4,$10,$20, or even $50 depending on your level. Take a look! / @exocagedrc - บันเทิง
Thanks for this. Grinding down the sides of the shift fork worked wonders. I was so frustrated trying to get this stupid thing to shift into first gear. Now it works great. 🤘🏻👍🏻
Man, this is awesome that you do these videos :) I havent bought this conversion yet, but I was researching
Hey man. Yeah it takes some work, took me a few tries to get it right.
I would just like to say thanks because; without this video I don't think my ryft would run as smooth as it is.. keep up the great work and thanks again!! 2-speed is a must if you have a ryft!!
Thank you buddy. Glad I can help.
Thank you! I have been trying everything to get this to shift. Several servos and several horns. Pulled it apart several times. Nothing worked. After this mod all is working fine. Thank you so much! And yes the shift arm heats up pretty good. Don't ask how I know. 😂
I'm glad you made this video because I had the same issue with my two speed trans with the Treal case just like Vitavon did. I only took the case down where the fork traveled for more movement.
Thank you for putting this video together, I just got done putting my transmission together (stock plastic) and could barely move the shift fork at all by hand, watched your vid, removed the useless shaft and ground down the fork, now it moves very easily!!!!
Awesome man! Glad I could help!
Good fix mr Exo ✊🏽 Happy 4th man and to all tha Rc fam out there 👊🏽
I am so happy the Losi digger is in Jenny’s
I’d love to own a Axial Ryft those are some tough looking pieces of new innovative RC’s. 💪👊😀👍
I just bought this kit and because so many people reported issues with it staying in gear I shaved the armature to increase travel. However, I left the additional rail rod in place to take the load instead of the much thinner control rod.
Unfortunately, after reducing the thickness of the armature the area that rides on the rail isn't long enough to prevent binding. By thinning the armature the chance of it binding on the rail has increased AND its strength has been reduced. The chance of the armature breaking off the rail during a shift seems inevitable.
It seems to me shaving the transmission housing would be a much better solution, especially in the case of the aluminum transmission housing which has more than enough strength supporting the rail.
Good info on the fix. Was thinking about just fixing mine into first gear and being done with it. Maybe I'll try this first. It will hold in gear but only if I'm holding the third channel toggle down in the direction I want it. Annoying!!!
I just built this kit and am having the same issue. I really want the 2 speed trans to work. I have a high trail and like the option of a 2 speed transmission. I’ll try this mod tonight. I don’t agree with removing that other Rod though. It keeps that shift fork from riding on the guide it sits in. Maybe that’s not much of an issue. Nice video!
Just fixed my problem thanks
Nice work well done looks good 👍
Hai mr.exo..may i know what kind if motor and esc do you use for this ryft
What is the recommended Servo for the 2 speed gearbox?
My Ryft make a slipping noise from the center diff. It still runs, but this is something new when I run it. Any info on this issue
What does st dr mean on the controler.
What tires are those on your Ryft?
Love the channel bud 🤘will you be doing the Vitavon axles on the trx6 ?
if I do those I'll need another TRX6 as my Creep 6 isn't suitable for them
Did the rift kit fix that
good job. thanks.
I was thinking about buying the ryft builders kit since it comes with 2 speed and sway bar. But what would you recommend for all the electronics?
Reefs RAW500 steering and 99 micro for 2-speed, Flysky GT5 radio and a castle mamba x with 2400kv motor.
thanks,
What mini servo are you using? Brand , Name , Number?
Is it able to high voltage 8,4 Volt?
I am looking for a good HV mini Servo with a fair price.
Knows someonne a good one?
Thank´s and Greetings
I wonder what would happen if you money shift it when your wide open 😬
So with a new setup; should I cut that unit like the way you broke it? Or just shave it straight outta of the bag?
I’d shave it right out of the bag
I’ve seen one other person take out the support shaft on the shift fork. I’m not so sure that I would call that an “oversight” by axial. I do think that the shift rod that engages the fork will be the next thing to go, based on the portion that broke loose from the fork. Happy 4th!
Are you a machinist?? I have a few in my family and you definitely seem like one. Ha
Happy July 4th all !!!
I’m not a machinist, but I work around those guys a lot…😉😉
I have 2 speed in mine, couple bashes and no issues hmm. Maybe cos i use super cheap micro servo and it doesnt have enough juice. Plastic case.
2speed is super loud tho and clacks due to tollerances in the engaging tabs. Recently had it apart and everything looked healthy. Though at 1st it were my diffs going and clacking but nah. Noticed my diffs are a bit notchy/coggy, like twisting a brushless motor by hand but rebuilt them and everything looks healthy. Are your diffs super smooth or have little cog to them?
Yiop men take more video no reef all day men
Hard pass on the Ryft for me.
First
wow youre sure persisting with this car man. not ready to admit its inherently crap yet? lol!
I really like driving it, not crap to me at all.
I got the same problem