ไม่สามารถเล่นวิดีโอนี้
ขออภัยในความไม่สะดวก
$17 Amazon China VS. Original Carburetor, Will It WORK? Honda CRF50
ฝัง
- เผยแพร่เมื่อ 27 ก.ย. 2022
- Today we take a cheap Chinese carb, tear it apart and see what the differences are, and then how does it run? Is the OEM better?
What are your experiences? Tell in the comments !
CRF50 carburetor I used: amzn.to/3xWhjcb
Rebuild kit I used: amzn.to/3SIp5y8
Carb cleaner: amzn.to/3xWhjcb
Carb dip can: amzn.to/3fs16oO
Tip me! Say Thanks! - withkoji.com/@...
Thanks for watching!
-Sparky
(as an Amazon affiliate I earn from qualifying purchases)
So lesson here is: Chinese ones can work if you make them work. But you’ll (hopefully) have better manufacture quality/ consistency with an OEM.
Yes, exactly!
It depends on what you want. In my experience, they do the job they are intended for. For anyone with limited or no mechanical eperience, get the OEM part.
I bought one of those Ebay carbs for my EZGo golf cart. Surprisingly it worked great with no adjusting. So far no problems in over 5 years of use. Saved many bucks over OEM part.
Same
I have bought Chinese carbs for a xr50 and dr200 just to see if they worked. They worked perfectly fine. Had to adjust the air screw for the xr50 a quarter turn out but that was it. The Chinese carb for the dr200 worked great right out of the box.
I can't find the internal parts for my old original mikuni vm16. And can't buy original mikuni vm16. I found a replica of it. And I bought it. It came and it looks solid. I'm gonna fit it today
I can vouch for the B-12 chemtool, really good stuff. Used it as a fuel additive in my brothers intruder that had a stuck float. The carbs were just replaced and very difficult to get to, so taking them out to clean them wasn't an option. Tapping the bowl didn't work, seafoam didn't work, generic walmart carb cleaner in the air intake didn't work. Added the amount of chemtool recommended on the bottle (or just above, can't remember) to the tank with new fuel, let it run a bit, let it sit for awhile, and next start float was free and fuel was no longer pouring out. Added a heftier fuel filter from J&P and hasn't happened since.
Willy willy good... I about spit my coffee all over my monitor at that one! Lol
I bought one of those chinese carbs when I somehow accidently blew a main jet into the aether while holding it in my solvent soaked fingers and blowing it off with compressed air... I figured since I had to buy a jet and a rebuild kit I would just try a chinese carb instead. Started first crank and worked perfectly, I was impressed!
Exact same experience over the three I've bought.
@devontitterington6418 How have they held up over time though? Im trying to figure out whether to rebuild mine or buy some cheap amazon ones.
Bigger jets for the larger needle jet = same flow rate....maybe.
Great info! Thanks!
Amazon carb on my yamaha quad I had to put stock carb jets in.
I've been looking at the Chinesium Flat Slides
I have a Yamaha RXT 135
(a 90's 2 stroke Street Bike)
the original carburetor is now acting up, it's just worth getting a brand new carb and reeds
I've considered getting a carburetor from Alibaba
the Chinese Carb out of the box is just garbage..the float height is just too low and the jets are winter tuned and the bike's running like crap
so I did a bit of tuning replaced the jets and it ran fine and still getting 80-100MPG's from a 135cc 2 stroke engine
I guess these Chinese Carb are just like out of the box guitars
you still have to fine tune it to get the most out of it
The best carb dip you’ll ever buy is original name brand Pine-Sol. Stronger and better than this new version of Chem Dip
Whatever you do NEVER get Chinese parts espically carbs. Ive been through to much with Chinese carbs. Better to spend more money and get a good oem one rather then to save some money and buy Chinese and want to light your bike on fire while trying to figure out the Chinese carb.
The one I got for a Briggs has rusted like real rust, or something very black pitted the walls of the bowl.
Normally I'd agree with you but the CRF50 itself is made in China. The OEM carb on my son's 2021 will not cooperate no matter how much I clean it and only runs on half choke. I'm at my wits end and ready to roll the dice on a Chinese knock off.
@@JenkkiMike then roll the dice, its not like you're risking much
Big up sparky ,new sub from Essex U.K how about coming over and helping me to street fighter my ZX10R C2h model ?🥷