+StopDropandLOL All AJUSA bolts are fully tested with its corresponding tightening, so if the bolt housing are in good conditions and all the steps before fitting the bolts have being followed (use a threaded tap, clean and degrease, blow housings and lubricate bolts on threads and under the heads) you will not have any problem on completing the tighten sequence.
Hello Feet! Yes, every time you change the cylinder head gasket, you must replace the head bolts. In this article you will find more information about this: www.ajusa.es/posts/1118/AJUSA-cylinder-head-bolts-set-for-its-line-of-cylinder-head-gaskets.aspx Best Regards
Hi Adrian! Could you specify us a little more your question? On the other hand, it is one of our tasks to install our products in diferent engines to record an assembly video and therefore show how to assemble our products. Visit www.ajusa.es or follow us facebook.com/AjusaSpain/. Best regards
@@adriananutoiu6084 In this case it didn't exist a specific reason for the substitution of the cylinder head gasket. Its just one of our task to replace and record videos about how to assemble our products. Best regards
You didn't show the timing tool or anything
What kind od grease is it ? Looks like copper grease...
Yes, it is copper grease. Kind regards
By that 5th step the bolt probably feels like it wants to snap.
+StopDropandLOL All AJUSA bolts are fully tested with its corresponding tightening, so if the bolt housing are in good conditions and all the steps before fitting the bolts have being followed (use a threaded tap, clean and degrease, blow housings and lubricate bolts on threads and under the heads) you will not have any problem on completing the tighten sequence.
Do you need new head bolts everytime
Hello Feet! Yes, every time you change the cylinder head gasket, you must replace the head bolts. In this article you will find more information about this: www.ajusa.es/posts/1118/AJUSA-cylinder-head-bolts-set-for-its-line-of-cylinder-head-gaskets.aspx
Best Regards
Why did you replace the head gasket?
Hi Adrian! Could you specify us a little more your question? On the other hand, it is one of our tasks to install our products in diferent engines to record an assembly video and therefore show how to assemble our products. Visit www.ajusa.es or follow us facebook.com/AjusaSpain/.
Best regards
@@AjusaAutomotive What is the cause of the head gasket change? I ask because I have this engine. Thank you for the answer
@@adriananutoiu6084 In this case it didn't exist a specific reason for the substitution of the cylinder head gasket. Its just one of our task to replace and record videos about how to assemble our products. Best regards
Unhelpful video...