Great video! The noise of this machine is crazy in original. This is a great way to improve it. Works perfect 👌🏻 Just be sure to buy a 3-pin fan, otherwise it won’t work 😊
Thanks for this! I did notice, however, that the fan is mounted the other way around, so it’s blowing air away instead of toward the cooler. Also, a simple 3-to-2 connector might make it easier. I ordered my Cool Controller 1L today, and if the sound is too much, I’ll tweak it with the Noctua fan right away.
great video, my jura cooler is the same one you have. It powers on and the fan spins, but sounds like it's struggling. It no longer cools the milk. I wonder if replacing the fan would solve this issue? Has anyone else had the same issue?
Hi! Thanks for your instruction video. Although there’s one thing that’s not clear. What did you do to remove the backside of the cooler? I couldn’t see what you did at the bottom, but suddenly it whas “Hé” and it whas removable. I removed al the screws but I don’t want to use too much force to avoid damage.
indeed, the original fan makes a lot of noise. Is there a drastic difference noticeable after replacement, is it worth it? How did you disconnect the plug of the original fan? What did you do with the yellow cable from Noctura?
Great video! The noise of this machine is crazy in original. This is a great way to improve it. Works perfect 👌🏻 Just be sure to buy a 3-pin fan, otherwise it won’t work 😊
Thanks for this! I did notice, however, that the fan is mounted the other way around, so it’s blowing air away instead of toward the cooler. Also, a simple 3-to-2 connector might make it easier. I ordered my Cool Controller 1L today, and if the sound is too much, I’ll tweak it with the Noctua fan right away.
great video, my jura cooler is the same one you have. It powers on and the fan spins, but sounds like it's struggling. It no longer cools the milk. I wonder if replacing the fan would solve this issue? Has anyone else had the same issue?
Hi! Thanks for your instruction video. Although there’s one thing that’s not clear. What did you do to remove the backside of the cooler? I couldn’t see what you did at the bottom, but suddenly it whas “Hé” and it whas removable. I removed al the screws but I don’t want to use too much force to avoid damage.
Upgrade: I fixed it yesterday. Had to pull the backside a little bit to above and then backwards. The fan works fine and is very quiet!
Have anyone tried this on the current Cool Control 1.1 L that has the oval container?
indeed, the original fan makes a lot of noise. Is there a drastic difference noticeable after replacement, is it worth it? How did you disconnect the plug of the original fan? What did you do with the yellow cable from Noctura?
Hi, 5:03 in the video I write red and black worked fine. Just cut the other one. It’s totally silent
@@isakfpvThank you for the information, I think I will decide to replace the fan because it is very simple. I hope there will be silence on the blog.