When the engines in the tractor it's very difficult to Dyno it at the flywheel.Nearly all manufacturers quote flywheel hp as its higher than wheel or PTO hp.Typically 10 to 15hp drive and pumping loss.
Dylan 6616 torque is the actual ability to do work. Horsepower is a poor way to rate engines. Here's something to remember Horsepower takes you to the hill, torque pulls you over it
Torque is any force that imparts rotational motion,in a shaft gear or wheel.In an engine it refers to the force turning the crankshaft and is a function off rotational speed and power.If you know the hp at fixed rpm you can mathematically calculate torque and vise versa hp.The two are related by a constant.Hope I have explained clearly what torque is.
I've had a photo with donkey in front of the mighty TW35 before at RWAS
Nice
The tw-35 was in out tractor run the day after
are you going to put up the rest of the dyno videos up too?
Rattra farm yep
Grassmen grass men good video what horse power is your ford tw 35 I would love to know
Marshall Reynolds its "supposed" ~185hp
Marshall Reynolds its "supposed" ~185hp
Grassmen thanks for loving my comment I really appreciate it as I alway look to your videos for ways to improve
Fords were never that great at the PTO tbh
because of the hydraulic clutch between ;-)
turn her up on the pump
great video hi from northern Ireland
first
Tractors are dyno'ed from the PTO? I just learned something!
yes they are
When the engines in the tractor it's very difficult to Dyno it at the flywheel.Nearly all manufacturers quote flywheel hp as its higher than wheel or PTO hp.Typically 10 to 15hp drive and pumping loss.
1
Geroge Saunders!
what is torque
xDDD
looked like around 180 horsepower and a bit shy under 900 lb-ft of torque...
Dylan 6616 torque is the actual ability to do work. Horsepower is a poor way to rate engines.
Here's something to remember Horsepower takes you to the hill, torque pulls you over it
@@RJ1999x Power literally is a measurement of work.
Torque is any force that imparts rotational motion,in a shaft gear or wheel.In an engine it refers to the force turning the crankshaft and is a function off rotational speed and power.If you know the hp at fixed rpm you can mathematically calculate torque and vise versa hp.The two are related by a constant.Hope I have explained clearly what torque is.