Tu idea esta buena , pero no puedes comparar la calidad de sonido del amplificador original bose con ese que instalaste es mi opinion , yo a mi bocina le conecte un bluetooth en la entrada de auxiliar lo alimente con 5volts y funciona muy bien , pero no le he puesto bateria externa porque el amplificador original bose tiene entradas de corriente de +18volts y -18volts a 1amp , pero me gusto tu trabajo gracias por compartir tu video saludos desde MEXICO
bose sold a sound dock with a battery pack already attached. amazon sells a blue tooth receiver that plugs right on to the 30 pin connector for 25 bucks. a lot of work for very little. plus no way does that sound like the bose amplified version did
Puff. No es lo mismo , se pierde la potencia y fidelidad , lo importante de tener este tipo de electrónicos y rescatarlos es conservar su amplificador y bocinas
Could you please kind enough to confirm that Bluetooth module you have used is working on 18 volts? I have seen 5 volt and 12 volt versions. 18 volt will fry this module in a raw second. I don't believe you have kept open the bass reflex chamber. Even there is hairline gap bass will reduce heavily😮
Please answer me, do you use speakers only? Right. You didn't use the electronic of the Bose. I was thinking to use the sound of the Bose with a Bluetooth player. Is that possible? What do you think? Did you understand my question? I want to use the Bose power sound. Because Bose has better power then any Bluetooth player.
Of course I'll tell you, this video does not use a Bose amplifier. since the original amplifier was not correct, a player with an integrated amplifier was put in it. everything is connected to bare speakers. and it sounds quite nice.
Put quite a bit of effort into this to prevent a Bose docking station going to waste. I even bought an identical MP3 player but the tone is awfull - not like a Bose at all despite the speakers being fine. I think the amplifier in the bluetooth is rubbish despite changing the Eq in the settings.
I would take the time to give my feedback on battery life of the bose sounddock system...it depends on the amount of volume used. if the volume is 60% or greater, the battery will last 5 1/2 hours, if the volume of music or audio, is 40% or lower, the battery will last 8 1/2 almost 9 hours. I found this information out from testing the battery life on the same speaker system I have. hopefully I gave the appropriate answer to your question
.... el mejor ejemplo de como estropear un equipo de calidad.... con un modulo barato, es mas no hay en el mercado módulos de calidad que superen el circuito Bose.
creo que no es buena idea eso que hiciste, queda la bocina funcional pero pierdes la calidad de audio por haber quitado el amplificador y por poner otra tapa ventilada a la caja acustica por la tarjeta que metiste, pero tu idea es buena para equipos de menos calidad, en lo personal creo que echaste a perder la calidad del audio. hubieras puesto un adapatador bluettoth en la base del dock de 30 pines y listo
Tu idea esta buena , pero no puedes comparar la calidad de sonido del amplificador original bose con ese que instalaste es mi opinion , yo a mi bocina le conecte un bluetooth en la entrada de auxiliar lo alimente con 5volts y funciona muy bien , pero no le he puesto bateria externa porque el amplificador original bose tiene entradas de corriente de +18volts y -18volts a 1amp , pero me gusto tu trabajo gracias por compartir tu video saludos desde MEXICO
seria bueno ue compartieras tu trabajo Tengo un sound dock sin fuente de poder y no me suena con nada
Compones bocina? Mi Bose no prende
Tengo 1 de igual condiciones. Habrá una solución? @@jesusleonjaimes1896
No lo hagan, la calidad de audio es horrible al reemplazar el amplificador del sistema bose a uno de marca china.
bose sold a sound dock with a battery pack already attached. amazon sells a blue tooth receiver that plugs right on to the 30 pin connector for 25 bucks. a lot of work for very little. plus no way does that sound like the bose amplified version did
The idea is fine, but the sound quality is definitely not the same as the amp and the original sound processor.
Great video! Do you have a link for the audio player module? Did you get it from Amazon?
I ordered from eBay
Nice one bro. I would like know if there was any drop in sound quality after drilling those holes?
Puff. No es lo mismo , se pierde la potencia y fidelidad , lo importante de tener este tipo de electrónicos y rescatarlos es conservar su amplificador y bocinas
WATTA BRONZE IDEA👍
Could you please kind enough to confirm that Bluetooth module you have used is working on 18 volts? I have seen 5 volt and 12 volt versions. 18 volt will fry this module in a raw second. I don't believe you have kept open the bass reflex chamber. Even there is hairline gap bass will reduce heavily😮
This module, which I installed, uses a voltage of 12 to 18 v, it is available on the market in our country as well as those that are 12 v.
Aapka ye kaha PR h reply kar ke bta dena Delhi me hai to
Just use a bluetooth adapter, plug a chromecast audio into the aux port or simply use your phone. Those old sd mp3 players dont age well
Чем Bluetooth адаптер 30pin не угодил? 🧐
Bluetooth module wire not showing connected on Bose....??
hey can you please tell how to make this original bose system work with AUX because i want to use the original bose amp and speaker system
It can be rearranged, only the original Bose amplifier has been removed here in this video.
Check this...th-cam.com/video/Mkr5D3pW5Dg/w-d-xo.html
30pin bluetooth dock adapters are available for cheap price better use that & get almost the Bose original sound quality.
Please answer me, do you use speakers only? Right. You didn't use the electronic of the Bose.
I was thinking to use the sound of the Bose with a Bluetooth player.
Is that possible? What do you think?
Did you understand my question? I want to use the Bose power sound. Because Bose has better power then any Bluetooth player.
Of course I'll tell you, this video does not use a Bose amplifier. since the original amplifier was not correct, a player with an integrated amplifier was put in it. everything is connected to bare speakers. and it sounds quite nice.
@@strongwire for the sound there are any difrend with original amplifier?
@@degesandiaka it is, but it's better to work anyway than to throw it away
это уродство 😂
What's the impedance of those bose speakers ?
Will the amp handle it ?
4 ohm 30Watts
@@FranciscoTorres-dl6rt thank !!
Can you list the parts you used
one bluetooth device with amplifier 2x 25 watt, Dewalt battery 18v, speakers are original from the device, there are not many parts that are installed
Put quite a bit of effort into this to prevent a Bose docking station going to waste. I even bought an identical MP3 player but the tone is awfull - not like a Bose at all despite the speakers being fine. I think the amplifier in the bluetooth is rubbish despite changing the Eq in the settings.
You could have used a small bluetooth module inside instead of ruining it's originality.... 🙄
That's how the owner wanted it done, and I suggested the same, but he didn't want it.
its the battery that sets me off. But he must be in construction and needs it for work si I totally get it.
The Bluetooth is not good, I install a Bluetooth in my and sound very bad.
Sir pwde 0o akong mag pagawa Sayo NG ganyan...may soundock din Po KC ako
Worst modification ever
Mujhe dock me Bluetooth set karwana h Delhi ka address de dena
Nice
Just wire a 7805 and a bluetooth module and you're done!
Hi, i am planning to do that, do you have a pic of how you solder that? i would be thankful
If you compare sound quality is it still same after convert
такую вещь испортить 😂..она же такие деньги стоило 😢
how long does this battery last ?
Non stop, one day
I would take the time to give my feedback on battery life of the bose sounddock system...it depends on the amount of volume used. if the volume is 60% or greater, the battery will last 5 1/2 hours, if the volume of music or audio, is 40% or lower, the battery will last 8 1/2 almost 9 hours. I found this information out from testing the battery life on the same speaker system I have. hopefully I gave the appropriate answer to your question
@@7HARRISON many thanks
.... el mejor ejemplo de como estropear un equipo de calidad.... con un modulo barato, es mas no hay en el mercado módulos de calidad que superen el circuito Bose.
creo que no es buena idea eso que hiciste, queda la bocina funcional pero pierdes la calidad de audio por haber quitado el amplificador y por poner otra tapa ventilada a la caja acustica por la tarjeta que metiste, pero tu idea es buena para equipos de menos calidad, en lo personal creo que echaste a perder la calidad del audio. hubieras puesto un adapatador bluettoth en la base del dock de 30 pines y listo
Que asco
Bad quality of sound !
It was better to work, than to throw it in the trash
I agree, the sound quality in this video made the speakers sound horrible and cheap
Que trabajo tan burdo 🤢🤮🤮🤮🤮🤮