Tearing out a gas tank that still has the factory red plugs installed. Removing the front & rear suspension of a truck without 1 stonechip on the frame paint job. What a relatable build!
Roadkill, yeah (but i'm not going to pay for them) but Stacey David, i can't stand him, never could. His "Laugh Talk" drives me up the wall. i'll take any sunday morning host over Stacey David. And his theme guitars........ i won't go there.
@@ccmyart I like Stacy David, I liked when he hosted Trucks, I watch the show now and I like the tech but personality is a big part of any show. Stacy David gets the tech down as well as has a personality that is entertaining to watch.
Especially the main dude.....such a dolt. Anyone mechanically inclined with a shop, a parts catalog and a pile of money could do this in a week. The only thing they did that required "skill" was making the brake lines, and that's still not rocket appliances. Doubt I'll be back for more.
Oh I wouldn't drive this build. Around 13:40 he tightens the spindle not for the front wheel hub with a crescent wrench. They are supposed to be torqued to a set torque, then backed off and torqued to a running torque. Those wheels are coming back of in under 2,000 miles.
> help the cat escape by getting the 🔑 to the □ (door) | move as if your were in 1st person point of view. ••••••••••••••••••••••• 🐱 | ••••••••••••• •••••• 🔑 | | ••••• •••••• •••••• | | •••••••□••••••••
Did he just say that he puts the wheel bearing castle nut on hand tight and then backs it off 3 whole turns? Anybody else do it this way? I've always snugged it up, backed it off until it turned freely and then backed it off just enough to fit the cotter pin.
Love these trucks. I have had mine for 27 years and just about finished it's 2nd rebuild. Sure wish this was a better show, don't need all the clowning around. Would much rather see the details about the build than the poor attempt at humor or whatever these guys think this is. I am surprised LMC and CPP go along with this type of BS for their show.
front spring removal sketch level 1000. Sheesh. You could have dropped a motor and wheels on that thing and anyone would have been happy to get it. nice end result though. Love the Gilligans Island remixes lol
I mean I wish I could tear apart a perfectly good $20k tuck for no reason..... Who’s going to relate to this build? No ones going to ever tear down a truck this nice.
Every deanship I've worked at had dudes with different personalities, but for video purposes, I would think they would tone it done. We had dudes that blew things up to sticking lunch pickles on the ceiling. They are still there. It's not about them but the build. Can I get the front / rear springs for cheap? Seriously!!! But, with any 50 year old vehicle, if you want to drive safe and reliably, you have to go thru everything, including updating the glass fuses in the box and brakes. If you can't be silly once and a while, you'll grow stale. Where are the torque wrenches? Stock springs wanted in Omaha. ASE Master Tech retired.
I only watched this because it's a c10 build but the show was poorly done. I have a 72 that needs plenty but I would not let these clowns touch my truck.
Putting it to getter not know bolts are screw's part Factory Five 33 Hot Rod LS1 How To Build: Rear Axle front clip two....... 32 Ford rear end in action..>! Wondering if 350 engine 409 computer world would hold it..😍🤩🤗
So hear this nah, the winner must be present, so if this corona pandemic get worse and they enforce the Travel restrictions.......how am I gonna get my truck😒
es aquí donde te das cuenta que no todos los que salen en TV son personas con conocimientos, todo parece ser una fiesta y hacen las cosas al ahy se va claro el proyecto no es suyo y echan a perder piezas que se pueden reutilizar pero es la mentalidad mediocre de nada me cuesta rompo todo.
Tearing out a gas tank that still has the factory red plugs installed.
Removing the front & rear suspension of a truck without 1 stonechip on the frame paint job.
What a relatable build!
Yeah. Everything was very clean. I prefer Stacey David or Roadkill.
Roadkill, yeah (but i'm not going to pay for them) but Stacey David, i can't stand him, never could. His "Laugh Talk" drives me up the wall. i'll take any sunday morning host over Stacey David.
And his theme guitars........ i won't go there.
@@mymusicaccount1456 Isn't it wonderful that we live in countries where we can all have our opinions and tastes respected.
@@ccmyart I like Stacy David, I liked when he hosted Trucks, I watch the show now and I like the tech but personality is a big part of any show. Stacy David gets the tech down as well as has a personality that is entertaining to watch.
@@Averagegunenthusiast He is a lot smarter than the majority of the so called hosts oot there.
The LS is great but love that you put a big block in it!👍🇺🇸👍🇺🇸
This is exactly why I wrench alone...
I saw this truck live in Tyler, Texas at Woodys Accessories and Off-road!!! What an amazing ride!!! SHAZAM!!!
that chassis already clean and shiny, someone has done it. lucky to you
No idea what's happening but I'm thoroughly enjoying it
The LED lights conversions are Awesome
i enjoyed how real this is...coming from a mechanic
Absolutely beautiful truck!
They should call this show impact everyday
This truck is sick
Man, I wish I had known ahead of time! I would’ve entered the contest to win this amazing truck! I love this build!
This reminds me of Shop class...
I try, I mean I really try to watch these videos, but the "personalities" just ruin the build.
Especially the main dude.....such a dolt. Anyone mechanically inclined with a shop, a parts catalog and a pile of money could do this in a week. The only thing they did that required "skill" was making the brake lines, and that's still not rocket appliances. Doubt I'll be back for more.
I agree. A bunch of dorks with tattoos.
It kills me how many of these "Custom Builders" can't even get the f@*%ing firing order right on the first try...
Man that trucks looks like its been rebuilt just for the show.
They need to quit calling these "Builds" and call them "Sponsor Assemblies"
Tighten the suspension with it all the way down!!! Then just throw the bearing in with no extra grease
Oh I wouldn't drive this build. Around 13:40 he tightens the spindle not for the front wheel hub with a crescent wrench. They are supposed to be torqued to a set torque, then backed off and torqued to a running torque.
Those wheels are coming back of in under 2,000 miles.
PrimedBuddha yea a bunch of amateurs
> help the cat escape by getting the 🔑 to the □ (door) | move as if your were in 1st person point of view.
•••••••••••••••••••••••
🐱 |
••••••••••••• ••••••
🔑 | |
••••• •••••• ••••••
| |
•••••••□••••••••
Dude! You would have to go though this whole truck and check every nut and bolt. lol
Incredible that in just 5 days it is possible to build a truck like this, congratulations. Greetings from Buenos Aires Argentina (South America).
What was u smoking dude ?
Omg love this truck
Glasses Trucker Hat Guy needs a reality check.
Did he just say that he puts the wheel bearing castle nut on hand tight and then backs it off 3 whole turns? Anybody else do it this way? I've always snugged it up, backed it off until it turned freely and then backed it off just enough to fit the cotter pin.
I think he was joking - backing it off 3 whole turns would be crazy loose.
I used LMC metal to restore the bottom 8” of my 70’s cab!
I bet those guys at CPP love working with that old guy.
These trucks are always given to someone who's a retired doctor or they already have 5 of them.
Saludo amigos excelente los felicito éxito Dios me los Bendiga
Love these trucks. I have had mine for 27 years and just about finished it's 2nd rebuild. Sure wish this was a better show, don't need all the clowning around. Would much rather see the details about the build than the poor attempt at humor or whatever these guys think this is. I am surprised LMC and CPP go along with this type of BS for their show.
Exactly what I was thinking. I figured they get all the parts for free. And it’s just advertising all the parts.
Why does the front suspension have 50 years of grease & grime on it, yet the frame & rear suspension is so clean you could eat off of it?
You guys do nice builds i would say a perfect build for sure.
Hollywood staged .......should do one with the crew from fast and furious 😠
What road side did you pick these people up
Super nasty sounding buddy did a good job beautiful l truck
front spring removal sketch level 1000. Sheesh. You could have dropped a motor and wheels on that thing and anyone would have been happy to get it. nice end result though. Love the Gilligans Island remixes lol
I think the title needs a few more words. 😄😄😄
What you giving it away WHAT! I never Hear of this ! Put the next one in my driveway
How many times can You watch a gang of assemblers put a mail-order truck together?
Nice truck
Oh god.... They let these clones do another build xD
@Frank Stall How come everything is new on this truck before they took it apart?
Clowns
what do u have to do to get a chance to win the truck
LMC TROCK CHEVROLET 🇺🇸👍GOOD CLASSIC 🗽
I have the same truck just for drag racing
1:06:30 Someone please call a real mechanic!
I mean I wish I could tear apart a perfectly good $20k tuck for no reason.....
Who’s going to relate to this build? No ones going to ever tear down a truck this nice.
Did you seriously cut through the wrong beam? Duuude 🤦♂️
Every deanship I've worked at had dudes with different personalities, but for video purposes, I would think they would tone it done. We had dudes that blew things up to sticking lunch pickles on the ceiling. They are still there. It's not about them but the build. Can I get the front / rear springs for cheap? Seriously!!!
But, with any 50 year old vehicle, if you want to drive safe and reliably, you have to go thru everything, including updating the glass fuses in the box and brakes. If you can't be silly once and a while, you'll grow stale. Where are the torque wrenches? Stock springs wanted in Omaha. ASE Master Tech retired.
Congratulations...
Can't believe they went through all that work then splashed gasoline all over the place.
Hi love ur channel
Should have hired Stacey David
Tell bro to put a face shield on
how do i get into this giveaway
When is the next giveaway.
Is that Will Scott?
What color red is that.
Lol no wipers ..until after the build was done ..I've done the same thing
Nice truck. I've got some show ideas that go beyond "build shows" however.
How many noticed the left front center cap was wobbly?
yes it was
A couple of bolt on parts....riiiight.
So how much would a build like this cost lol?
Thought you guys were being a little harsh, but after watching, this was poorly executed. it was like high school shop week.
Thats my old truck does it have three on the tree?
I only watched this because it's a c10 build but the show was poorly done. I have a 72 that needs plenty but I would not let these clowns touch my truck.
Jay Whitney needs plenty? This is almost a fully refurbished truck. You don’t even want to see the rust buckets I’m looking at.
The clowns are in house .You guys trying to show stupidity is a bonus . The person that wins this truck better have it inspected.
I have one it is cool
Estos tipos juegan más que lo que trabajan,todo lo toman en son de juego y eso si cae mal
What was the last track played during the credits? Anyone know?
Why do these guys seem to have no idea of why they are doing this?
coooool
I can’t handle the guy with the glasses and apparent knee problems.. he just rubs me the wrong way.
Intelligent design practiced builders seem bored at assembly.
They make diamond hole saws🤦
i GUESS YOU CAN JUST WASTE TIME WHEN YOU'RE NOT PAYING FOR THE PARTS.
Wheres the wipers
that poor c10.
you can throw all those new parts at my nova
Cool.
The real "nucklehead" is at 46:46 putting a shiny metal object between the positive and negative posts 🤯 on the battery (brain malfunction???)
Hasse Thorslund what could happen man ? I mean I know what’s gonna happen but what’s your take on it ?
Nothing like roadkill or dirt everyday this just lame tattoos and even lamer hosts
Goodshit
The shifter need to change to a shorter one ,,,,,,,
Oh cool. Another one not on MOTD.
What look is that at 1:34...
Just show the real guys that come in and do the work....
Should have used an LS.
Hacking away on that classic truck like teenagers in shop class. Unbelievable!
Putting it to getter not know bolts are screw's part Factory Five 33 Hot Rod LS1 How To Build: Rear Axle front clip two....... 32 Ford rear end in action..>! Wondering if 350 engine 409 computer world would hold it..😍🤩🤗
Cuanto sale un trabajo de esta clase
Do a Ford bronco 2
🙏
Windshield Wipers might help,wtf
Boa tarde rua fasutolo 130 & 213 são Paulo-sp água branca-lapa brasileiro carro 1972 chevy Pu vai amém
Not enjoyable to watch. Give me Dirt everyday, anyday over this.
Idk I'd drive anything this crew builds. YOU DONT TIGHTEN DOWN SUSPENSION AND STEERING COMPONENTS UNTILL ITS SITTING ON THE GROUND.
Marijuana
Why does it look like they are removing brand new parts? What a waste!
So hear this nah, the winner must be present, so if this corona pandemic get worse and they enforce the Travel restrictions.......how am I gonna get my truck😒
I know one thing no cheap thin Chinese LMC tin going on my project,
Nice truck and build, but these guys are annoying. If they would just shut up, show would be better
My rip husband love.thank🍎🍎🍎
Pos Ryan Manson.
What a caustic place to work. I mean I get the jibbing but honestly its a bit much to watch, like just shut your pie holes, have fun and work.
I like the work that you guys do but why do you never ACTUALLY do any engine work..? Is all you guys know how to do just engine swaps..?
You listened? Why… were people really belly aching about using LS engines?
Give it to me
👍👍👍👏👏👏👏👏👏👏10
es aquí donde te das cuenta que no todos los que salen en TV son personas con conocimientos, todo parece ser una fiesta y hacen las cosas al ahy se va claro el proyecto no es suyo y echan a perder piezas que se pueden reutilizar pero es la mentalidad mediocre de nada me cuesta rompo todo.