Hello again! I've just examined my motor and found a leak, too... :( Should I split crankcases and weld it from the inside or should I use some sealant from the outside? What can you suggest?
Awesome video! What were some of the symptoms of the bad stator? I have an e series kdx200 and the po had replaced the source coil years ago and I think I'm having similar problems he had. 0-.25 throttle it's fine but as soon as I open it up it bogs and pops and bangs and backfires.
i've opened magneto cover and discovered a huge amount of black oil or carbon... is it seal damaged or those leaks you've just show us? uhm... what should we do with those leaks?! new crankcase? (
fxgtlive pressure test your crank case, like he shows in the video. if the crank seals are leaking, split the cases and replace the crank seals/bearings. if it's just the case leaking, jbweld it !
I made the video. I fixed it by getting the cases HPC coated on the inside. Its a thin ceramic coating. No more problem. Cost me around $80 NZD from what I remember
Hello again! I've just examined my motor and found a leak, too... :( Should I split crankcases and weld it from the inside or should I use some sealant from the outside? What can you suggest?
![[TH] 2024 PMGC League | Survival Stage วันที่ 1 | PUBG MOBILE Global Championship](http://i.ytimg.com/vi/FVFT-PFwU80/mqdefault.jpg)
Lot to love Kawasaki putting the crank seals inside the casing meaning an engine split for a leaking crank seal.
Where did you get the components for the crack case compression test? I need to make one as well. Thanks
Thanks for the video.
Hello again!
I've just examined my motor and found a leak, too... :(
Should I split crankcases and weld it from the inside or should I use some sealant from the outside? What can you suggest?
I need help reinstalling my stator. I noticed 4 taps for screws. The stator appears to only use 3 screws to mount. What its the extra tapped hole for?
Awesome video! What were some of the symptoms of the bad stator? I have an e series kdx200 and the po had replaced the source coil years ago and I think I'm having similar problems he had. 0-.25 throttle it's fine but as soon as I open it up it bogs and pops and bangs and backfires.
Mate that's exactly what's mine is doing ..what was your cure.cheers Bryan
Nice video bud !
what happen to stator corp in mass?
i've opened magneto cover and discovered a huge amount of black oil or carbon... is it seal damaged or those leaks you've just show us?
uhm... what should we do with those leaks?!
new crankcase? (
fxgtlive pressure test your crank case, like he shows in the video. if the crank seals are leaking, split the cases and replace the crank seals/bearings. if it's just the case leaking, jbweld it !
+fxgtlive clean the shit out of where the leak or leaks are and get permatex in a cheeze wiz can. best shit. napa has it.
I made the video. I fixed it by getting the cases HPC coated on the inside. Its a thin ceramic coating. No more problem. Cost me around $80 NZD from what I remember
Wow
Hello again!
I've just examined my motor and found a leak, too... :(
Should I split crankcases and weld it from the inside or should I use some sealant from the outside? What can you suggest?