How to assemble full height turnstile | Macrosafe

More info: www.macrosafeg...
For the installation of full-height turnstiles, in addition to preparing the common tools needed to install the turnstiles, such as: Allen wrenches, Phillips screwdrivers and socket wrenches are used. Auxiliary parts should also be selected according to the packing list. At the same time, when installing, in addition to determining the hole position and drilling, it is necessary to bury N*13 M10 expansion bolts in advance.
The specific installation steps are as follows:
1. Put the multi-sided frame, single-sided frame, top box, and
2. Start assembly after preparing the round shell and bottom bracket
3. Put the top box on top, pay attention to the direction of the top box
4. Put the bottom bracket in the approximate position
5. Install the brake lever on the bottom bracket, pay attention to the direction of the brake lever
6. After the rotary brake lever is installed, push it in as a whole
7. Install the non-circular protective shell on the top box, and then push the brake lever in the right position.
8. Put the circular protective cover on again
9. Install the single-sided frame
10. Check whether the top box is installed and parallel
11. The three fixed vacancies of the bottom bracket are marked
12. The 12 vacancies of the frame are marked well
13. After marking the positions, dismantle them as a whole, then drill holes for expansion screws, and finally assemble and fix them