Tamiya MF-01X | 50 mph 80 kmh - brushed |
ฝัง
- เผยแพร่เมื่อ 9 ก.ย. 2024
- It was a polite thing to introduce my entry for the MF-01X 2024 Poor Boys RC Speed Challenge 😂
---
Ze Rulez : • 2024 SPEED RUN CHALLEN...
Ze Rulez part 2 : • Ze Rules, Part Deux! -...
---
Last time, with the TT02, we finished 3rd in brushed category; probably more competition this year !
Ze Car :
Tamiya MF-01x Long Wheelbase (239mm)
Tamiya Toyota Yaris body (not sure about that one)
Team Orion 12x3 brushed motor (starting "slow" for the 1st attempt)
Futaba S3003 servo
LRP Quantum 2 brushed ESC
TL01 Speed Tuned Gear Set (#53342)
25t Pinion (06 Metric)
MF01x Alu Motor Mount (#54660)
CVA Oil shock (taken from the TT02...)
Hudy 803062 rubber tires
SkyRC GPS GNSS Performance Analyzer (GSM020)
Spektrum radio
Hope to see you on this challenge 🤞🤝
#speedrun #challenge #mf-01x #tamiyarc #brushed
Wow Gabriel, that is an incredible start! So good to finally "meet" you on TH-cam. You were lucky not to drive through the horse poo! 😅 It looks like this car is unpredictable at high speed though 😬😬 but you have probably started faster than I will finish! Good luck and go well! 🤞😎👍
Thanks Mark. Yeah went outside my comfort zone as a non english speaker 😌 It was a close call with the poo, this car suddenly went unstable (the 2nd not filmed attempt was even worse 😥). This time I started fast, not spending time with running with the Torque Tuned. I'm not in for the win, but want to reach the famous 62 mph / 100 kmh that I could not with the TT02 (lacking the raw power, that I now have). Just to work on stability 🤞🤝
That's a great start, Gabriel! You're going to be a force to be reckoned with again this year!
I will do my best to tickle the top guys 😁🤝
Great set up Gabriel..... Looks like you are going to be a force to be reckoned with in this challenge.
That was a seriously quick run, with some awesome roll over's!
Also, great to see another channel featuring poo in their footage! 🐴 💩
Nice to be able to put a face to the channel name as well fella! 😊
👍 👍 👍
Thanks 🤞 In term of raw power, I'm confident, but, right now, my MF01X is dismantled. Either I was lucky, either the 1st tumble "broke" something as the car wasn't the same anymore. It's very frustrating 😤 As for poo, in Switzerland, while having many cows, horses, goats, ..., it's not that usual on the road 😁 Looking forward to your runs (with DT02 and MF01X) 😉🤝
@@coygtrc
I'm sure that you will get her sorted mate.
As I've said to others, I'm not so sure that this chassis will take the same level of abuse as previous years platforms (TTO2's and CWO1)
I think we are going to be seeing a lot more breakages..... especially as the speeds increase!
Keep up the great work on the channel buddy. 😊
👍 👍 👍
Nothing like setting the bar high!! Excellent. No pressure to the others in YT land then lol!
Thanks Glenn; you will do it too 😉 🤝
That was moving! Think I heard a walk of shame too!
😂Yeah as soon as you hear the "Ghost Train" music from Adobe Premiere Elements, it's a walk of shame. Maybe Fil (or Craig) can create a "Walk of Shame" AI song 🤩🤝Weidly, the car always returned on her wheels, only the GPS bailed out; and it was exactly the same on the 2nd not filmed attempt (my poor GPS and Yaris body 😥) 🤝
@coygtrc I have asked Mark Bryan for a "walk song" may it's time I take the ball and run with it.
Man dude, that thing scoots!!!!! Holy horse sh!t Batman, Look Out!!!! Hope you didn't have any damage with that nasty tumble the car took.. 50 Mph WOW!!!!!!! Great video Gabe!!!!!!
Thanks. Seems the body (and GPS) took all the damage. Hopefully better servo and servo saver calmed down that sudden tendency to roll 🤞🤝
@@coygtrc Not the GPS......
Wow! You've got some great speed out of this!
Thanks Freddy 🤝 While the handling is problematic, it can support loads of gear ratio, even the famous Ludicrous Mode 😁 So it's "easy" to go fast 😅 You will too 💪
@@coygtrc Yeah I have a feeling I'm going to have to do some practice runs for the next run before I put anything on camera. My pinions arrived finally so I'm hoping for a significant increase in speed which will mean handling issues lol. I've been working with only a 22T pinion so far.
Beautiful clean runs. Nice speed. Now I have to catch up.
Thanks 🤝 I wouldn't call clean, only 2 good passes, then it's like an "A-Team" episode 😁 I wish you all the best 🤞🤝
Very nice 👍
Thanks for watching 👍🤝
For brushed setup that's fast👍
Thanks. Yup, was amazed to reach my initial goal with "only" a 12x3. So now I raised it to 62 mph / 100 kmh. Just to work on stability 😉🤝
Okay, that's a great bench mark. Congrats to the result. I hope I get as fast as you.
Thanks 🤝I hope you will be faster😉🤞🤝
@@coygtrc not sure, you got a bigger pinion (25T) than me (24), but beside the motor we're thw same😉
Nice run! It looks like you need a longer run. The motor sounds like it's just starting to get to its full potential
Thanks. Size of the road will always be a problem in my area. And this motor is by far not my fastest 😅 But, we'll see 👀🤝
That is very impressive😮 great run👍
And it's only the beginning 👀 It's going to be (much) faster, there are some crazy guys out there (especially with better / longer / flatter road) 😵 Thanks for watching 👍🤝