Hello, is there an email address to contact you? I seem to have a similar problem and need to ask a few questions. Would be great if you could help. Cheers.
Mystifed as to why you just didn't remove the baseboard as that would have given you the space. You could have then reset the baseboard using a spacer and above the floor, giving the floor plenty of room to expand.
The major problem was thats the only end i could cut plus taking it all out wasn't an option as that would mean lot more work due to other factors in the room.
wouldn’t it have been easier to take off that nasty baseboard molding first and throw it in the garbage ?
This is why you should put the floorboard on top of the floor so it can expand freely.
Awesome work guy
Perfect music! And good job
I jst jacked up the low spots under the house made house level and it all went back normal 🤷♂️
Hello, is there an email address to contact you? I seem to have a similar problem and need to ask a few questions. Would be great if you could help. Cheers.
Good ideas!
Mystifed as to why you just didn't remove the baseboard as that would have given you the space. You could have then reset the baseboard using a spacer and above the floor, giving the floor plenty of room to expand.
It's called a toe kick saw. Check it out sometime.
I wish I had one of these. I looked for something like this but didn't come up on my research. Thank you.
Can a toe kick saw be regulated to cut laminate flooring exact thickness?????
He put it back in without an expansion space.
wouldve been much faster by simply takin it aut and cut the ones that were near that wall and place it all back.
The major problem was thats the only end i could cut plus taking it all out wasn't an option as that would mean lot more work due to other factors in the room.
Man, it’s moisture damage.
It was my fault. I used a carpet cleaner and got too much water on the wood floor. Hindsight.. Stupid i know..
@@DIY_Easy it is what it is :) the beauty of life and experience.
Tell me your Mexican without telling me you're Mexican
I would have drawn a line with a pencil, removed the base trim, cut the floor and replace the base trim