You are a clear man, and that touches you in the transparency with which you explain, your excellent photography, and your taking of the detailed explanation .. Oh man, you are a prince and your safety
That shifter linkage is great. I've considered making a buggy like this, but I have no lathe, and no welder. But I just got my new shed in a box, I will put a secondary roof over it for protection from the weather, after that it's all projects all the time. Can't wait to make stuff just like you do. Nice work.👍💩
Thank you for this video. I am building a 1928 Morgan RIP special race car and I am using a modified ONAN/Tiger Moth opposed twin and an MGB transmission along with an MGB rear differential with those beautiful wire wheels. I will video what I can. the inks again.
Wow what a wonderful job it was great show you are a very smart guy Congratulations maybe you are a mechanical engineer very well thought out your project
one thing you needed to think about : the clutchpressure plate when declutched wants to push itself intoo the crank of the engine damaging it you need to put a trustbearing between them
Nice work bro. I like it I have question Do you think the machine that you use strong enough for real car?? How strong your machine is?? Thanks keep working ..
Brother, Awesome video! What engine 22hp? If you went with chromoly flywheel free up some rotation Mass! Should of Tig weld the half shafts and turn them down so they are balanced! Or you will be replacing bearings again! Best Regards!
Gotta love English lol I could imagine learning it from another language. I'm mean you can have the Right to go Right and you may be Right but you may also go Right off a cliff. Gotta love it lol I commend anyone who is learning it
English sounds like when me and my friends were in elementary school and tried to make up a language but we were really just making shit up. “Buffalo buffalo Buffalo buffalo buffalo buffalo Buffalo buffalo” Is a grammatically correct sentence in English. English is my only language and I’m still learning new things. Anyone who has the patience and intelligence to even learn broken English should be respected.
Very well done! But I had lightened the flywheel as much as possible. and it would have had to be closer to the engine. "leverage". With the translation you can now only drive in 1&2 gear?!? Or?
I love it ?!! Screw the armchair haters , I hate nothing more then to see what looks like a cool diy build n start watching only to find out their using a 150000 $ lathe to build their so called diy projects.... Good work n something anyone could also do with limited tooling !!
@@Pawex55 my statement was applying to these types of videos in general ' I think u'd be hard pressed to find a decent metal lathe and a milling machine capable of doing a lot of these type projects for 1500 $ if you know of some by all means plz provide the links ' also some of us may only have a limited amount of space to do our diy projects I think the jist of my comment may have eluded you.....
Actually the extra flywheel weight should help keep it from stalling. The heavier flywheel keeps its momentum when you engage the clutch so its not fully relying on engine power.
I like seeing people who master their craft, like Le Dan does. You’re possibly one of the masters in the making, but I think you could do with some help writing scripts for your narration.
I know maybe its late but can you say witch transmission did you use thank you if you remeber im asking because i would like to try and make one buggy myself im only 16 and i would like to learn and build thanks once more if you remember
wait you have a lathe but bought a crankshaft to get the end?...why not just make the end on the lathe? those axles will be way off balance...to align two shafts you can either lay them both in the "V" if a pc of angle iron then clamp them and weld or a better way is to slide both shafts into a pc of snug tubing. the tubing has an opening where the two shafts meet so you can weld them together...then you weld the tubing ends to the shafts.
Es bueno el concepto de adaptación, pero recomiendo que se hagan ajustes a la proporción de peso en la volanta de ambrague , dado que el motor es de menor rango para dicho propósito
You are a clear man, and that touches you in the transparency with which you explain, your excellent photography, and your taking of the detailed explanation .. Oh man, you are a prince and your safety
This is so awesome!!!! Best buggy videos on youtube! I send my respect to you from Texas as a fellow mechanic. God bless you good sir!
#thereisnogod stupid
Thank you for sharing this idea. The making a buggy. I love it.
That runout of the flywheel... geeeeez man, that will eat the motormounts quickly. And your joints too.
Wow this it the first time ive seen anyone else make the clutch the same way i did cut the old flange and attach the flywheel to it . Nice job
Great video brother I am a new subscriber I cannot wait to put your clutch into practice Thank you for sharing hello from Detroit Michigan USA
using what you have is part of the appeal of projects like these. well done.
Totally agree, armchair warriors would nvr understand !
Not sure how long the engine crankshaft bearings will last but great job figuring how to mate the two together!
That shifter linkage is great. I've considered making a buggy like this, but I have no lathe, and no welder. But I just got my new shed in a box, I will put a secondary roof over it for protection from the weather, after that it's all projects all the time. Can't wait to make stuff just like you do. Nice work.👍💩
This is the most mad max fabrication I've ever witnessed
Thank you for this video. I am building a 1928 Morgan RIP special race car and I am using a modified ONAN/Tiger Moth opposed twin and an MGB transmission along with an MGB rear differential with those beautiful wire wheels. I will video what I can. the inks again.
Wow what a wonderful job it was great show you are a very smart guy Congratulations maybe you are a mechanical engineer very well thought out your project
fantastic idea with this gearbox
Glad I found this channel!
Bro like how it's made but so much better haha
Yeah me too. Im trying to build me a track vehicle for my post driver an i think this idea is what im looking for.
Run what you brung man. Good job👍
Awesome! ..you need tree bars and more triangles in your frame
Very cool!
This man is the king of cobblers
one thing you needed to think about : the clutchpressure plate when declutched wants to push itself intoo the crank of the engine damaging it you need to put a trustbearing between them
The thrust would be taken by the "air handler" or flange bearing, whatever you want to call it.
It's gonna be pretty gutless anyway 😂
Jaime bien vôtre vidéo Mercie
Nice work bro. I like it
I have question
Do you think the machine that you use strong enough for real car??
How strong your machine is??
Thanks
keep working ..
Amazing full, it is very good
Nice video i love the style
1:02 What cutoff wheels do you use? They cut through that crankshaft like a knife through butter.
Brother, Awesome video! What engine 22hp? If you went with chromoly flywheel free up some rotation Mass! Should of Tig weld the half shafts and turn them down so they are balanced! Or you will be replacing bearings again! Best Regards!
Awesome projects
One day i will build this buggy too.
PS: Love your videos
Amazing👍
Saludos amigo m gusta tu video espero que subas más
Very creative i love this video
great video its nice to see peopel being creative
I didn’t know these were dubbed. Finally! I found this vid and I going to rewatch the series. In English.
Really, these were dubbed? I had no Idea! The narrator's speech seemed so natural!
Great idea dude
Hi there
actually not bad
but isn't it easier to turn the differential and install the engine to the rear?
Good job... bro but we need to hit this on the road.
Good jobs. Perfeck
NICE JOB SIR .....
Good job,and nice edeas
cool video, but did you see how much metal shavings were left on the CV shaft?
Gotta love English lol I could imagine learning it from another language. I'm mean you can have the Right to go Right and you may be Right but you may also go Right off a cliff. Gotta love it lol I commend anyone who is learning it
The dismantling market.
English sounds like when me and my friends were in elementary school and tried to make up a language but we were really just making shit up.
“Buffalo buffalo Buffalo buffalo buffalo buffalo Buffalo buffalo”
Is a grammatically correct sentence in English. English is my only language and I’m still learning new things. Anyone who has the patience and intelligence to even learn broken English should be respected.
Un carro willys Jeep petrolero diesel petrolero
0
HBO 9b
Cool vids . Keep it up
Nice project!
Nice work
Bravo
So innovative.... Interesting idea... Good job....
Nice sir👍👍👍
Very well done!
But I had lightened the flywheel as much as possible.
and it would have had to be closer to the engine.
"leverage".
With the translation you can now only drive in 1&2 gear?!?
Or?
I love it ?!! Screw the armchair haters , I hate nothing more then to see what looks like a cool diy build n start watching only to find out their using a 150000 $ lathe to build their so called diy projects.... Good work n something anyone could also do with limited tooling !!
@@Pawex55 my statement was applying to these types of videos in general ' I think u'd be hard pressed to find a decent metal lathe and a milling machine capable of doing a lot of these type projects for 1500 $ if you know of some by all means plz provide the links ' also some of us may only have a limited amount of space to do our diy projects I think the jist of my comment may have eluded you.....
@@Pawex55lol , yea I hear ya but u can still build some cool stuff but ya need to keep it simple I suppose
Question about the build
Anti vibration engine blocks…?…..who makes them….and what was their original purpose…?
I had been done that kind of assembling from transmission to engine.
I like the conversion a 1993 Chevy geo metro transmission could work as well
Смотрел как американцы строят багги, а попался наш родной канал😊 лайк поставлю обязательно
Интересно перевод заказывал он или ролик продал?
Извиняюсь. Зашёл на канал а там полный дубляж канала
Nice
Good job
lathe work at it finest xD
Looking good, might be worth getting the flywheel lightened, the smaller motor wont need the extra weight that the car engine did.
Actually the extra flywheel weight should help keep it from stalling. The heavier flywheel keeps its momentum when you engage the clutch so its not fully relying on engine power.
If they aren't using the electric start from the car the ring gear is a couple pounds alone
¡Gracias!
Коробка передач от москвича, кулиса от жигулей... Штирлиц еще никогда не был так близок к провалу)))
Хоть ктото заметил руские запчасти
the only issue i see is the efficiency will be worse, but it will last all the clutch dumps u can give it with that little engine haha.
have you tried making a dozer or some heavy machines?
If the flywheel is weighted won't that change the balancing of the motor and cause bottom end problems.
Se puede armar un buggy con una plataforma de VW , motor ,transmisión y suspensión sin tanto problema.
I like seeing people who master their craft, like Le Dan does. You’re possibly one of the masters in the making, but I think you could do with some help writing scripts for your narration.
Mas vamos admitir que é um mestre no improviso e na gambiarra... !
When polishing a shaft with emery cloth, use very light oil, I use WD40.
Way cool. Now you need a turbocharged predator engine
The Hemi predator of course.
Genial j adore
👍👍👍
How good good i like
You've gotta have BALLS to build!
💪 😎👍
Parabéns Belo trabalho ❤
👏👏👏👍
I know maybe its late but can you say witch transmission did you use thank you if you remeber im asking because i would like to try and make one buggy myself im only 16 and i would like to learn and build thanks once more if you remember
when will you do the test?
Its like someone wrining an essay and replacing half of the words with synonyms they don't under stand to try to get a better grade.
Funny how such small details are dead giveaways for someone whose first language is not English.
Let’s see the buggy drive!!!!
Thanks for the video
Can a 6 mm adaptor sheet be used?
Yea
Its just what ur motor attachs to but you might need longer bolts tho
Sounds like charley from always sunny in Philadelphia
Dude really had a hoist for a 50lb engine lmao
you didn't think about the thrust pressure every time the clutch is engaged or disengaged. look at vw cases, pounded out......
Vibrations from every angle.
There is no way those calipers are reading true.. those machining skills though. Lol
Terima kasih atas tutornya sobat
wait you have a lathe but bought a crankshaft to get the end?...why not just make the end on the lathe? those axles will be way off balance...to align two shafts you can either lay them both in the "V" if a pc of angle iron then clamp them and weld or a better way is to slide both shafts into a pc of snug tubing. the tubing has an opening where the two shafts meet so you can weld them together...then you weld the tubing ends to the shafts.
and you could have added the starter and battery from the car
Dude your lathe is vibrating everywhere
Haha fr I like the kind of people that make things work to the very end though haha
Yes, that is the first thing I noticed.!!
Thanks for coming up with the idea me an my friend
Es bueno el concepto de adaptación, pero recomiendo que se hagan ajustes a la proporción de peso en la volanta de ambrague , dado que el motor es de menor rango para dicho propósito
Así es 👍 por ejemplo ponerle una transmisión de una motocicleta de 750cc
Back when Skynet rode the short bus...
Зашел чисто послушать как на английском звучит! Звучит хорошо! Лайк!
Hi what you are use for are gearbobox???thanks
Dude you need to get a proper set of lathe tools, that stuff is old and not even properly ground. Also get a center pilot drillbit for your endstock.
That’s the worst machining I have ever seen.
This dude’s a hack.
I want to know how you were able to drill the keyway slot without the bit bending into the existing hole?
00
Mantap bang.. saya juga lagi bikin mini buggy. 😊😊
Is this a good engine? i thought that this engine was be designed by honda.
Whats the transmission out of? Looks like either a VW or a Front wheel drive Subaru...
pointer vw, logintudinal engine front wheeldrive
@@franciscojaviergonzalezlar3998 I was gonna say a vw bus
It's taken from Moskvich Aleko (21412) at 3:46 is the model number of the car.
Ещё до появления в кадре Жигулёвской переключалки почуял нашего Кулибина.
Меня сходу КПП 2141 смутила) и другие з/ч советские)))
شكرا لك عمل جيد ولاكن نسيت تركب بادئ التشغيل السلف؟ او ممكن يكون السلف راكب على نفس المتور؟ شكرا لك🌺👍
type of gear box
😢😮😅😊❤
Интересно) КПП от м2141, подушка КПП от Волги, а лопочат не по нашенски😂
I'd like to ask what kind of gearbox is that? can it be used on a honda k24 engine? please answer?
Thanks dude
It's taken from Moskvich Aleko/AZLK-21412. It's a Russian car.