👇 If you found this video helpful, you can support us by buying products on a platform of your choice via our links below (we get commission): 👕 Make your clothes unique: rctoys-aventura-smart-solutions.myspreadshop.com/ ▶ AliExpress: IMAX B6 Balance Charger: s.click.aliexpress.com/e/_DCKBDf5 ▶ Amazon: IMAX B6 Balance Charger: amzn.to/3UjG9vr 📺 Related videos: How to Charge 2S-3S LiPo Batteries with Imax B3 Pro Charger: th-cam.com/video/R-ix7Ubgxw0/w-d-xo.html Check out how to charge Lipo batteries with Imax B6 LiPro balance charger.
I put the battery to charge normally with the process you showed in the video and after 10 seconds it stops charging and throws me out and doesn't charge. I don't understand why this happens?😓
Bro can you help me so when I start to charge my battery it charges for like few seconds and then for some reason it says connection break I tried but sadly can’t get it to charge. What do I do?
The battery could be bad. Have you discharged it too much when using the battery? If the charge is below certain limit, it won't charge. To understand if the problem is with the battery or with the device, try to charge another battery.
mAh does not define how many cells the battery has. It defines how long your battery will last. Check the voltage of the battery. 1 cell (1S) = 3.7 Volts, 2S = 3.7V x 2 = 7.4V, 3S = 3.7V x 3 = 11.1V and so on.
If one of the cells goes below 3V too much, it wont let you charge it, as it is not safe to do so. Check if you have the settings right, the type of the battery, voltage, etc. Try different current charging rate. If one of the cells is charged and others are discharged, sometimes unbalanced discharge happens, it wont let you charge.
If you have the b6v3 u can press "Batt. Type button" until u see "Extra function" press "Enter". Then the 1. function "Battery Status" press "enter" --> LIPO "enter" --> hold enter
you are so close to shorting that battery with croc clips, you shouldn't be showing that in a training video. You may be careful, other may burn their house down.
thank you for your comment, this is why I explicitly mention in the video to be carefull about the clips. My channel is about experimenting with things and experimenting can sometimes be dangerous. My channel description includes a disclaimer as well.
@@RCToysAventuraSmartSolutions I put the battery to charge normally with the process you showed in the video and after 10 seconds it stops charging and throws me out and doesn't charge. I don't understand why this happens?😓
Check the battery voltage per cell, one of the cells voltage may be too low and thus the charger wont let you charge it as it has gone below the allowed minimum discharge voltage.
As I experiment with different toys I have to switch these batteries around from toy to toy, they are easy to use and fast to replace. With these batteries you have to keep an eye on everything anyways, have not had any problem yet.
Thanks for your comment. The clips have insulation rubber and you can move it up and down to avoid contact. In most cases, you will have standard connectors on the cables and wont have to deal with the clips.
You can use the max current rate indicated by the manufacturer of the battery. In general terms, the slower is the charging the better and the safer. If the battery had some issues before, it is better to use low charging rate. Also, if you need to charge the battery faster, you can increase the charging rate, but always within the allowed limits.
@@RCToysAventuraSmartSolutions is this normal the charger is getting hot while charging? Only the charger is getting hot but the battery is normal temperature
👇 If you found this video helpful, you can support us by buying products on a platform of your choice via our links below (we get commission):
👕 Make your clothes unique:
rctoys-aventura-smart-solutions.myspreadshop.com/
▶ AliExpress:
IMAX B6 Balance Charger: s.click.aliexpress.com/e/_DCKBDf5
▶ Amazon:
IMAX B6 Balance Charger: amzn.to/3UjG9vr
📺 Related videos:
How to Charge 2S-3S LiPo Batteries with Imax B3 Pro Charger: th-cam.com/video/R-ix7Ubgxw0/w-d-xo.html
Check out how to charge Lipo batteries with Imax B6 LiPro balance charger.
I put the battery to charge normally with the process you showed in the video and after 10 seconds it stops charging and throws me out and doesn't charge. I don't understand why this happens?😓
@@HGynaika_mou_me_mpaouliazei try charging at one amp
This video really helped a lot compared to other videos thumbs up for this video.
Just got this exact model used but basically brand new. Hope $20 was a good deal! The video helped a ton. - Cheers
Bro can you help me so when I start to charge my battery it charges for like few seconds and then for some reason it says connection break I tried but sadly can’t get it to charge. What do I do?
The battery could be bad. Have you discharged it too much when using the battery? If the charge is below certain limit, it won't charge. To understand if the problem is with the battery or with the device, try to charge another battery.
Can you help me I have a 2200 mah lipo battery so is it 2s or 3s
mAh does not define how many cells the battery has. It defines how long your battery will last. Check the voltage of the battery. 1 cell (1S) = 3.7 Volts, 2S = 3.7V x 2 = 7.4V, 3S = 3.7V x 3 = 11.1V and so on.
@@RCToysAventuraSmartSolutions but how tho? I see three chambers or batteries so is that like 3s
Good information thank you, In storage mode does it reduce voltage as well as increasing it as required?
Yes, it can reduce the voltage.
Does it come with the power source adapter
yes it does
Will it charge a Lipo with only a xt60 ( no balance cable ) ?
There is a mode to charge without balance cable, but not advised.
Hey can I have some help cos when I plug my 3s lipo in when it is low it says it is full and won't let me charge it
If one of the cells goes below 3V too much, it wont let you charge it, as it is not safe to do so. Check if you have the settings right, the type of the battery, voltage, etc. Try different current charging rate. If one of the cells is charged and others are discharged, sometimes unbalanced discharge happens, it wont let you charge.
Is it possible to check the battery percentage/storage amount with this?
yes, it shows the current voltage at the moment you start charging it, and you can discharge the battery to the desired voltage as well.
If you have the b6v3 u can press "Batt. Type button" until u see "Extra function" press "Enter". Then the 1. function "Battery Status" press "enter" --> LIPO "enter" --> hold enter
Tanks
You know absolutely NOTHING about this charger!
you are so close to shorting that battery with croc clips, you shouldn't be showing that in a training video. You may be careful, other may burn their house down.
thank you for your comment, this is why I explicitly mention in the video to be carefull about the clips. My channel is about experimenting with things and experimenting can sometimes be dangerous. My channel description includes a disclaimer as well.
@@RCToysAventuraSmartSolutions I put the battery to charge normally with the process you showed in the video and after 10 seconds it stops charging and throws me out and doesn't charge. I don't understand why this happens?😓
Check the battery voltage per cell, one of the cells voltage may be too low and thus the charger wont let you charge it as it has gone below the allowed minimum discharge voltage.
Why are you using those connectors on your batteries ? those are not safe !!!
As I experiment with different toys I have to switch these batteries around from toy to toy, they are easy to use and fast to replace. With these batteries you have to keep an eye on everything anyways, have not had any problem yet.
Those clips need to be covered…you have them touching too. ⚡️⚡️
Thanks for your comment. The clips have insulation rubber and you can move it up and down to avoid contact. In most cases, you will have standard connectors on the cables and wont have to deal with the clips.
Again greed kills another product, destined to fail for overpricing...
Why u use 0.1A?
You can use the max current rate indicated by the manufacturer of the battery. In general terms, the slower is the charging the better and the safer. If the battery had some issues before, it is better to use low charging rate. Also, if you need to charge the battery faster, you can increase the charging rate, but always within the allowed limits.
@@RCToysAventuraSmartSolutions is this normal the charger is getting hot while charging? Only the charger is getting hot but the battery is normal temperature
@@RCToysAventuraSmartSolutionsyou ghosted bro
Listening to you makes someone very depressed.