That's some real talent in holster making, and video like this helps folks understand what hard work and material goes into such a rig and justify the cost. Great job absolutely beautiful.
@@RoadAgentLeather My pleasure. Impossible to appreciate the work that goes into its creation without viewing the process. May I ask approximately how many "man hours" were involved? I now have a greater appreciation for the rigs I have after seeing your fascinating video!
I just want to take a moment to say thank you!! I have been watching your videos for sometime now and I’m in the middle of a “Hand of God” build. I have been using your 5 part video as my MAJOR guideline. You have been most helpful! I have the holster parts all cut out and tooled, working on the belt now. This vid was most helpful…. Like measuring to the second hole!! MOST HELPFUL! How to set rivets, how to tool leathers, you have been a great help!! Antique finish on leather has been great as well! I just wanted to say thanks
wow great rig you did a great job. Can you please tell me what are those tube like punches and bent corner punches you are using are they any good and where can I get them? Thank you
I’ve become addicted to watching your videos. I would like to discuss a custom build, if you would do me the honor of making something as a commissioned piece. I have a Colt SAA that would really look amazing in one of your holsters. How do I get in touch with you?
Armor maker here. You complain of crushed leather by the rivets. In my own leather riveting experience, the best way to avoid crusing the leather is to do it the reverse order as you do: _first_ gently mushroom the head with the little rounded hammer, _then_ whack it down to desired tighness with the flat hammer (or with the flat side of a ball-and-flat hammer). Try it.
buenas tardes, estoy en Uruguay, ¿ hay alguna forma de poder conseguir un molde para hacer una pistolera?.... y cual sería esa forma?... muchas gracias.
Love your work and I’m looking forward to making a Hand of God using your video as guidance. Question though. Where did you get your corner and oblong punches from?
That's a beautiful rig just like everything else u do and your videos are awesome. I was wondering where u got the set of tools u cut the corners of the belt and the tongue slot with? Thanks
So have you used this much in the dropped down position? I’ve got one here I did years ago that I’ve always wanted a little drop on. I was wondering how well that worked out?
Love it, nice job! Where did you get that safety ruler? The one I have is really cheap and I don't like it, but cannot find any ones that look better than what I already have...
That's some real talent in holster making, and video like this helps folks understand what hard work and material goes into such a rig and justify the cost. Great job absolutely beautiful.
I watch all of your videos from London UK. A true Master craftsman at one with his Art 👏👏👏👏👏👏
Fascinating... what a craftsman you are! Absolutely beautiful rig!
Thank you very much!
@@RoadAgentLeather My pleasure. Impossible to appreciate the work that goes into its creation without viewing the process. May I ask approximately how many "man hours" were involved? I now have a greater appreciation for the rigs I have after seeing your fascinating video!
I just want to take a moment to say thank you!! I have been watching your videos for sometime now and I’m in the middle of a “Hand of God” build. I have been using your 5 part video as my MAJOR guideline. You have been most helpful! I have the holster parts all cut out and tooled, working on the belt now. This vid was most helpful…. Like measuring to the second hole!! MOST HELPFUL! How to set rivets, how to tool leathers, you have been a great help!! Antique finish on leather has been great as well! I just wanted to say thanks
That's great to hear! I occasionally include a subscriber show-and-tell in my videos. Shoot me a picture of it when you're done.
Best looking rig I have ever seen....
Excellent work...
Parabéns pelo excelente trabalho! Realmente é uma obra prima seus coldres!
Thanks for watching!
What a fantastic rig and some pretty fancy twirling at the end. Outstanding!
Absolutely gorgeous, I would be proud to wear that outfit!!
Outstanding work sir. You continue to amaze and inspire.
Awesome mark my friend keep up the good work
Beautiful rig, I'll be referring back to this video when I do mine. I've made a lot of holsters but western style rigs are new to me.
Just beautiful , I really look forward to your vids.
Another awesome job.
You do some fine work, I hope to get there some day.
You ladies be sure to watch to the end!
Very pretty work !
You are a total artist, bro!
Phenomenal looking rig
Beautiful work my man ! 💪
very nice work !
wow great rig you did a great job. Can you please tell me what are those tube like punches and bent corner punches you are using are they any good and where can I get them? Thank you
love your vids man
What an amazing rig!!!
What size are the pronged 2:01 domes used on this rig?
Thanks! The large nickel spots are 3/4" and 1/2"
I like it nice 👍 set up
Saludos muy buen trabajo👍👍👍
I enjoyed that
Thanks for watching!
Outstanding!👍👌✔
I’ve become addicted to watching your videos. I would like to discuss a custom build, if you would do me the honor of making something as a commissioned piece. I have a Colt SAA that would really look amazing in one of your holsters. How do I get in touch with you?
Armor maker here. You complain of crushed leather by the rivets. In my own leather riveting experience, the best way to avoid crusing the leather is to do it the reverse order as you do: _first_ gently mushroom the head with the little rounded hammer, _then_ whack it down to desired tighness with the flat hammer (or with the flat side of a ball-and-flat hammer). Try it.
It's so nice do you sell them ?
Beautiful belt and holster! I'd like to buy one of those stamps you are using on the ammo loops, can I ask the tool number or where you got it?
You made that look so easy ... fantastic work 👏
buenas tardes, estoy en Uruguay, ¿ hay alguna forma de poder conseguir un molde para hacer una pistolera?.... y cual sería esa forma?... muchas gracias.
Love your work and I’m looking forward to making a Hand of God using your video as guidance. Question though. Where did you get your corner and oblong punches from?
Thanks! I get a lot of those specialty tools from Amazon. I've had the best luck with the "Wuta" and "Owden" brands
That's a beautiful rig just like everything else u do and your videos are awesome. I was wondering where u got the set of tools u cut the corners of the belt and the tongue slot with? Thanks
Thanks! You can find them cheap on Amazon. Just look up "leather corner cutters". There's several variations.
I love your work and enjoy your videos. could you share what weight leather you use for the belt and liner ?
belt is 9 oz veg-tan. liner is 2-3 oz milled veg-tan
Wonderful
So have you used this much in the dropped down position? I’ve got one here I did years ago that I’ve always wanted a little drop on. I was wondering how well that worked out?
Ps....I guess we'd all like to know....how much is a Custom Rig like that cost the client ? 🇬🇧
I guess the amount of work and quality it that apx 300 to 400
Mexican style, beautiful. Bellissima🤩.
great work! how much can you sell that belt for?
Do you have a website where you sell your leather gun belts and holsters?
Do you have a pattern to download / sell for this belt ?
Hi. No, I just kinda made this one off-the-cuff.
Love it, nice job!
Where did you get that safety ruler? The one I have is really cheap and I don't like it, but cannot find any ones that look better than what I already have...
Amazon. I don't remember exactly which one is was though. There's a few on there.
Can I ask what thickness your leather is? I absolutely love your work ❤️!
I typically use 8-9 oz for the outer shell. The liner is 2-3 oz milled veg-tan
How wide is the main belt? 2.5 or 3"?
Thanks for watching! I actually don't have this one anymore. But 3" sounds about right.
Очень красивая работа
Wow!
What is the weight of the leather you used for the belt and the liner?
The belt is 9 oz. veg-tan. The liner is around 2-3 oz milled veg-tan.
Q belleza quiero una
Went to Etsy, not there yet...or already gone?
won't be up for about a week or so. Need it for a photoshoot
@@RoadAgentLeather 👍
Top 😊
What size spots are you using :)
a mix of 3/4", 1/2", and 3/8"
brother you are working hard but you have to make your video short, you will get good results.
Top sleep
Thanks for watching!
Where did you get that small ball peen hammer ??
Ricky from IBM
I believe that came from Harbor Freight
@@RoadAgentLeather thank you !! Enjoy your videos very much !!