It's all nice, when you listen to it for 10 mins. I had one and for longer rides you need ear plugs, it's so damn loud, especially without db killer, trust me, you can reduce the volume on your PC, you cannot do that when riding the bike.
Hi, this is a euro4 engine. I cannot tell the difference between euro4 and euro5 engine sound. Also if you buy a aftermarket exhuast the sound will be absolutely different.
Yeah, only the process of removing DB killer, can be litle pain. It needs some love from drill and maybe a bearing puller can help a lot. But the engine is same architecture so the sound should be similiar and without DB killer loud as hell. Have a safe ride.
@@agmotorcycles3458 Ok, this will be done by professionals at yamaha service as the owner is also official distributor of akrapovic. I've seen videos of how it's done, very delicate job indeed. I was advised to break-in engine for first 1000 km on stock exhaust. Any tips on that? How to do it properly? (This is my first new motorcycle)
@@fabianz6336 he's supposed to not using until 5th gear because the rpm is too low. 100kph for 700cc bike in 3rd gear is enough for a chill ride. unless you ride a small bike, on 80kph you must use 5th gear or even 6th to reduce the noise
@JohnSky Motovlog Sorry but there is absolutely no point of reving the bike when you are travaling at constat speed. This CP2 has no problem of traveling with constat speed at 60KM/H in 5th gear. Sure if you need to acceleate quicker, you need to downshift to lower gear. The idling speed is 1300rpm so if you are crusing at 2500 the engine isnt under revving. Again this is applicable only if the bike is traveling at constat speed on flat road and there is no need of quick accelaration.
You can´t get tired of this sound 😍
Nice to see you here in the comments :)
Man, that parallel twin sounds amazing!
the XSR700 smashes the competition in every category in its level!
except for bells and whistles. xsr only has abs compared to other middleweights. that is why i luv my xsr. 😂
Let's just say, if I ever get another street bike, this will be the one.
Sounds so damn amazing 🔊😍
what a beautiful sound. Ears are pleasant
Sweet tunnel run!
It's all nice, when you listen to it for 10 mins. I had one and for longer rides you need ear plugs, it's so damn loud, especially without db killer, trust me, you can reduce the volume on your PC, you cannot do that when riding the bike.
Necakal som ze na xsr700 motovlogoch uvidim prave Bratislavu :D
Great ride bro
BTW, kde si mal prosim ta umiestneny ten mikrofon? Pripadne aky? Vdaka!
i have a ktm smc r but this sound is going to make me get a second bike this summer
Bratislove! 😍
eargasm!
Heheeej Trnavske myto hned na zaciatku:)
Did you ECU flash or anything after installing the exhaust?
Sound of mt 07 from brazil
This sounds like a restricted version?
is that the same engine as the mt07?
No DB eater right? Not legal in germany 🙁
Co je to presne za typ prosim te? Ten zvuk je supr.
@Patrik Michal je to typ: S-Y7R5-HEGEH
Please please tell me this is eur5 engine version? I just ordered mine and I hope to get this same sound.
Hi, this is a euro4 engine. I cannot tell the difference between euro4 and euro5 engine sound. Also if you buy a aftermarket exhuast the sound will be absolutely different.
@@agmotorcycles3458 I intend to buy full akrapovic (like on xtribute) and have db killers removed. Hope it will sound like this. It's sick. 👍
Yeah, only the process of removing DB killer, can be litle pain. It needs some love from drill and maybe a bearing puller can help a lot. But the engine is same architecture so the sound should be similiar and without DB killer loud as hell.
Have a safe ride.
@@agmotorcycles3458 Ok, this will be done by professionals at yamaha service as the owner is also official distributor of akrapovic. I've seen videos of how it's done, very delicate job indeed. I was advised to break-in engine for first 1000 km on stock exhaust. Any tips on that? How to do it properly? (This is my first new motorcycle)
That bike sounds angry
Which city is this?
Prague
check out mine im using yoshimura r77
do you have db killer?
No the db killer is out.
why is he riding at 35 mph in 6th gear
City drives are boring…
you ride a 700cc just like you ride a 155, where did you learn riding a bike? 🤦🏻♂️
he‘s riding in a city, what is he supposed to do?
@@fabianz6336 he's supposed to not using until 5th gear because the rpm is too low.
100kph for 700cc bike in 3rd gear is enough for a chill ride. unless you ride a small bike, on 80kph you must use 5th gear or even 6th to reduce the noise
@JohnSky Motovlog
Sorry but there is absolutely no point of reving the bike when you are travaling at constat speed. This CP2 has no problem of traveling with constat speed at 60KM/H in 5th gear. Sure if you need to acceleate quicker, you need to downshift to lower gear. The idling speed is 1300rpm so if you are crusing at 2500 the engine isnt under revving. Again this is applicable only if the bike is traveling at constat speed on flat road and there is no need of quick accelaration.
@@agmotorcycles3458 some people don't know the shit they talk about.
@@agmotorcycles3458 actually it does if you dont want carbon deposits to kill your engine early.
The "economic" shifting kills engines.