MK3 Drag car update, One week left.
ฝัง
- เผยแพร่เมื่อ 24 พ.ค. 2024
- The countdown is on and we have a ton of stuff to do on our MK3 Drag car. We've made over 1000whp in it which at this point seemed like the easiest part. Our first event is coming up fast and we still have paint, and endless small things to do. Race car life, means no life.
Support the channel on Patreon - / comotorsports
Support the channel with CO Merch
CO Motorsports Holographic Sticker 2 Pack - comotorsports.ca/co-motorspor...
CO Motorsports Pullover Hoodie - comotorsports.ca/co-motorspor...
CO Motorsports Zip-Up Hoodie - comotorsports.ca/co-motorspor...
CO Motorsports Shirt - comotorsports.ca/co-motorspor...
CO Motorsports Snap Back Hat - comotorsports.ca/co-motorspor...
CO Motorsports Beanie - comotorsports.ca/co-motorspor...
Tools we use.
Orange Nitrile Gloves
amzn.to/3wFWK2w
Bolt Extractor Set, Easy-Out Screw Extraction
amzn.to/3HvKtE4
Inspection Camera 7” 1080p
amzn.to/3R8PSnL
3M Safety Glasses
amzn.to/3Y1vQ0R
Grinding discs
amzn.to/3H6HzUU
Lincoln Welding Gloves
amzn.to/404S8jQ
TITAN 16138 9-Piece Low Profile Impact Triple Square Bit Socket Set
amzn.to/3XVRIuj
Digital Timing Light
amzn.to/3JkxJBL
Swivel Magnetic Spark Plug Socket
amzn.to/3JbZ4FV
GEARWRENCH 20 Pc. Screwdriver Set
amzn.to/3WDXlMR
Camera Gear
Sony Alpha ZV-E10
amzn.to/3DbAi52
Rode Compact On-Camera Microphone
amzn.to/3kCVudP
67'' Phone Tripod Stand & Selfie
amzn.to/3kxLSks
Audio Video Capture Cards Cam Link Card HDMI
amzn.to/3XOnJoe
Dummy Battery DC Coupler Kit for Sony Alpha A5000 A5100 A6000 A6100 A6300 A6400 A6500
amzn.to/400wyNE
20FT USB-C to USB-C Cable
amzn.to/3inpU2U
25ft HDMI to Micro HDMI
amzn.to/3wvcMwk
Camera Tripod, Mini Flexible Tripod Stand
amzn.to/3H6orXi
Milling
Carbide End Mill 2 Flute Square End Standard 1/4" Diameter x 3/4"
amzn.to/3WDJsy0
Accusize Industrial Tools 1/8'' Thickness 10 Pairs Precision Parallel Sets
amzn.to/3WBUrYL
Precision 123 Blocks, Two Pack
amzn.to/3XEQuUB
Deep Black Apron
amzn.to/3j8Ochx
Accusize Industrial Tools 2-1/2'' Cutting Diameter R8 Shank Indexable End Mill
amzn.to/3XT2KAE
Lathe Turning Tools, Boring Bar Turning Tool Holder with 10pcs CCMT09T304 Inserts
amzn.to/3kCPfql
Tap Magic Cutting Fluid
amzn.to/3HtG6cC
Carbide roughing End Mills, HRC45 Tialn Coated
amzn.to/3Del3Z4
Hold Down Clamp Clamping Set Kit Mill
amzn.to/3XV3vch
Finally by Loxbeats / loxbeats
Creative Commons - Attribution 3.0 Unported - CC BY 3.0
Free Download: bit.ly/FinallyLoxbeats
Music promoted by Audio Library • Finally - Loxbeats (No...
Finally by Loxbeats / loxbeats
Creative Commons - Attribution 3.0 Unported - CC BY 3.0
Free Download: bit.ly/FinallyLoxbeats
Music promoted by Audio Library • Finally - Loxbeats (No... - ยานยนต์และพาหนะ
How about that wing though.
Just look at it!
Love it, great design.
Looks good. How do you know that the cylinders will have enough force to keep the wing up under load?
Of all the XFWD cars I’ve seen, this is the nicest rear wing air brake of any of them. Fantastic work.
I would have just said would you look at it.
Bro leave the valve cover the way it is ❤️ it looks good already
100%
The wing is great!!
Red for the valve cover.
Car is looking good. Keep it going until the goal is accomplished.
All the best for the event and don't forget to enjoy
Congratulation on the wing guys it looks great and should be a huge help to slow that thing down at the top end!!
Valve cover, depends what you want. Gray won't look much different than a typical cast aluminum. Red will pop, but the coils are also red so that kinda sucks. I'd probably leave it lol.
Did 25+ HPD gen10 CTR cars from raw chassis to full turn key TCR cars at my race team(when in the shop, my roll was fabricator, so these were straight up FULL builds, so fun). Love making fire lines and hard lines for brakes/fuel, etc. Better than making harness but def not making a harness. Love this type of content.
Your attention to detail is unbelievable but I guess it has to be with the speed this car will get to. Definitely all about the wing,i love it as much as you obviously do. Cam cover definitely red.
Cleanest low 8 second MK3 ❤
Damn you guys are quick with content🙏
Here for the Wang
It's a good one.
The wing looks dope!
Sick
👍
What day is the event? Can't wait to watch some footage!!!i been watching you guys for a while and and super excited ya
😂😂😂”I hate my life” Marcos famous quote hahaha
I say color match the valve cover Nardo Grey if you don't want black, I put Black Magic on my ABA valve cover.
Wrinkle red for the valve cover
LOVE TO SEE THIS! im a fuel cell, pumps and hoses from getting to installing the 16vt engine and parts ive been collectin for 10 years ;) also have you looked around for an obd1 grille? that or a vento would be make a beautiful JTI also color match the vavle cover. you already have the r8 coilpacks to give it a nice contrast.
Id love to have a better grille but not happening for what people want for them
@@COMotorsports trade you an obd1 grille for a nice 16v turbo mani ;) ill even deliver it after I get my passport hahah. but yeah....vento grilles are dumb, ive not seen an obd1 grille in a very long time go up for sale, hence why ive kept mine so long
natural ...
never paint aluminum parts on race cars.
Definitely Grey valve cover...or clearcoat.
The handle for the chute looks a little small and fiddly, why not use one of the larger pull down ones and incorporate the air brake into it?
I like the polished valve cover.
I've used this handle in the past without any issues. It doesn't take much effort to pull it so there's no need for it to be beefy. As for deploying shoot with air, that may happen eventually but the list is already way to long and we need to draw the line so we can get to the track,.
I love the small annotations lmao.
I filmed a bit of me sanding (no we didn't)
We didn't film the welding of that (yes we did)
Yeah this one was over a long period... can't keep anything straight.
Big wang gang
Unrelated to this video but I am looking at doing a 4motion conversion on a dsg Scirocco MK3 (Mk6 golf basically) using a MK2 TT or A3 8p donor
I know the fwd diff needs changing to a AWD one to accept the angle drive but can I use a diff from a manual car in the dsg box?
No
Wrinkle black
What happened to the 2.5 turbo
Paint match the cover with the roll cage so nardo?
Red valve cover
Agreed
You guys say one week left..... Would that race happen to be June Bug? Would be awesome to see the car in person.
No sorry closer to home.
just a quick question is it possible to do a maf delete on a 1.8t stock wideband and run good
If it's tuned to run mafless, sure.
Valve cover would look good white, and the mani going black will be a good contrast, not red personally i think it would be too much red the whole engine bay is red already, so for me black and white or nardo and black, best combo for sure nardo cover and black mani, car looking good keep it up🔥💪
She looks like a piece of candy
It looks better now. 😀
Love you guys but clayton doesn't have b Roll up shit lol.......THAT THING IS BEAST MODE THO!!!.
Just said it's not a VR.... but AMAZING JOB!!!
......take this with a grain of salt.... you guys need better videography... your knowledge needs to be captured better