couldnt for the life of me how to reassemble the slide/barrel/recoil spring then watched the first minute of this video and realised how dumb I was. Thank you for showing a very easy way to reassemble so I can properly clean the gun.
Hopefully you might have a suggestion for me. New cybergun. The barrel lifts off easy but the slide won't budge to disassemble. . I've done everything according to turltorials but no luck. Thanks
great upload, my brothers nozzle shit itself when he used some of that red nuprol extreme performance gas last winter, this really helped me take it apart and replace the damaged stuff.
@@mikelm6198 i found a replacement nozzle on redwolf, and a small spring for the nozzle on airsoftpro. Not sure if they still have them in stock though.
I actually had it included in the original footage but I cut it out of the edit to keep the duration of the video down :D Slide (empty): 118g (super light!) Barrel (empty): 164g
I mention this in the review video: th-cam.com/video/yBjkSdeBOR8/w-d-xo.html And yes the main components, slide, barrel and frame are most likely extruded/molded and CNC finished aluminum.
I want to disassemble my gun and i can disassemble the barrel but my slide doesn't move. Can somebody tell me why? Is there a part of the gun which can block the slide?
@@CJAwesome83 I have got he same issue. I was able to remove the barrel. *Removed the Magazine. *Put the safety position to Fire. *Take-Down Lever is down. *Cocked the Hammer. The Slide won't move at all, just a tiny bit forward. Gun is functional as usual.
Try racking the slide before you try to take it off. Might be something in the hammer mechanism that is protruding up into the slide preventing it from coming off.
Does anyone know the size and length of the nozzle return spring? Think the one I had went missing, wanted to reassemble with a new nozzle after the old one shit itself for a friend.
Idk why, but when I got this gun only the handle came in, and the slide did not, is their some website i can buy the slide separately and for this same desert eagle.
Great guides! Helps immensely in swapping out parts to build a MW2 style Deagle. Don't have to buy two more guns to swap out the entire slide and frame now. I'm actually looking to upgrade the inner barrel at this point, do you happen to know the length?
@@CJAwesome83 Replacement outer barrel just came in, and I measured it while everything was apart. Approximately 133mm in case anybody's looking for this information. I say approximately since the hop up cutout area is smaller, so a 133mm for something like a MK23 might recess further back into the outer barrel by like a millimeter or so. I'm sure that difference is insignificant, though.
If the lever that connects the trigger comes off and the gun is cocked you will NOT be able to remove the slide. You'd think that something like this would be secured with a screw, but no, just a metal nub that inserts into a plastic hole connected to the trigger.
What about the lower part? You can't disassemble that? The metal clip behind the slide stopper has been bent on my first day of use. Fired around 50 shots and it bent and got out of the whole. I want to try straighten it out.
I’m having trouble unscrewing the blowback housing, the screws are too tight and I’m loosing the Philips cross grooves, so they are basically stuck, I have a chrome one I’m working on and I don’t want the same to happen, please help
Hrmmm... Maybe try some lubrication and if you wan without melting anything apply some heat from a lighter or something like that. And make sure you have the rights side screw driver.
Hi there mate, I broke my nozzle and the return spring is missing and I can't seem to find a replacement by WE. Any chance the Tokyo Marui brand is the same size spring as the one in the video@
Hi. Plaese help me. I want to remove the slide of my W.E D.E. but when i already released the slide pin, only the outer barell was remove and the other part(nozzle slide) remain. I cant remove this part..please help me.
I know this video is old but its worth a shot- I have the new L6 version and my shots are pulling to the left. Are there any reasons why this is happening? I've confirmed it's not my grip or any human error. I also do want to say thank you so much for these strip down videos. They are super helpful!
@@CJAwesome83 Do you know of a way to release the hammer manually? Also, what does the button on the bottom of the handle do? I can't quite figure it out from the schematic, and it doesn't seem to do much but that's probably because the hammer is locked.
Look through the video and observe the steps for removing the safety selectors. There are some metals tabs under them that adjust the tension required to actuate it. You could just try putting some force into switching the safety lever. To make it easier, lock the slide back to the rear (so it doesn't need to interface with the trigger bar in the frame).
Here is a good rule of thumb: "Lefty loosey, righty tighty!" Which means rotate to the left (counter clock-wise) to loosen, and rotate to the right (clock-wise) to tighten. :-) And those directions are when looking at the screw (or other rotating item) from straight on, i.e. for a screw, you are looking at the actual screw head. I mention that because I have gotten confused before regarding barrel threads if they are specified when screwing on/off from the front, or from behind (as you normally would on something mounted to a barrel).
Yes I do! You can also follow me on some other platforms to stay up to date! Website: www.nonexistent.nu/ TH-cam : th-cam.com/users/CJAwesome83 Facebook : facebook.com/NXAirsoft/ Twitter : twitter.com/CJAwesome83/ Instagram : instagram.com/CJAwesome83/
Hey man, I’m having issues with my hop up unit, it’s just seriously inconsistent, some rounds fly straight at the ground, some pull to the right, most go where they should. I’ve adjusted it to all sorts of different settings, and taken it apart and put it back together, which made it slightly better but the issue remains. Do you’ve any idea how to fix this issue? Thanks I’m advance!
Not really. Except that try adding more hop up. If the barrels just roll out of the barrel that usually indicates that the BBs don't get properly retained by the hop up unit.
Non Existent unfortunately it doesn’t matter if the hop up is on max or not, the bbs are often flying with front or side spin rather than backspin, making them go to the side or down
@@failvids4all This may be quite late, but still, this is what I found out about my Cybergun Deagle: The hopup also did not seem to work with my replica. BB's fly all over the place. When I peeked through the barrel (after having it taken out of the assembly), I only saw a round hole and no sign of any hopup bulge whatsoever, regardless how much I turned the screw. I opened the unit and could not immediately see anything wrong with it. The hopup should work, as I could move the screw and get the tensioner onto the rubber, as expected. So, I closed it and then noticed that I could check the functioning without having opened it. There's a small hole at the top, where the tensioner arm and screw meet. So, I took a thin hex tool to puss onto the tensioner arm and looked through the barrel: there it was, the hopup bulge. Then, I turned the screw a few times. Now I discovered the problem: the screw did not actually move the tensioner arm, as it is supposed to do. I put some offset pressure onto the tensioner arm so as to allow the screw end to reach that condition, as it did not get to that position yet before. That did the trick: now, the screw end touches and retains the tensioner arm properly and the hopup bulge is visible through the barrel now. Once I will have tested this, as soon as I get a chance to visit our airsoft center again, I will know for sure that this problem has been solved.
It's the part that locks the magazine valve knocker in place until the slide cycles back and releases it. Steel parts for additional durability I guess.
I think I mention it in the video but I did not manage to remove mine either. You have to press down the spring loaded mechanism/bearing and push it out but it is very difficult :|
No, it does not have threading inside the outer barrel to install an adapter or silencer. Instead it has more realistic "fake" rifling inside the muzzle of the barrel.
Yes I mention this here: th-cam.com/video/MnqPiHDBrKg/w-d-xo.html By the way, the size of the nozzle is: Inside diameter: 17.0mm Inside depth: 42.0mm Volume: 9.53cm^3
I've heard about one or two instances of broken barrels on a forum. Seems they were used very heavily before failure though. Oh well, that's why KY Airsoft exists for spare parts :-p
Make sure the recoil springs are seated properly. Make sure your magazine is out. Make sure your hammer is cocked. Make sure that the disassembly lever is in the down position. If it still won't go on, try pressing on the muzzle backwards. If that fails, well, be a little more aggressive, it should go on :p
Would you like to Cerakote it ? If yes I would love just to offer you for a free a coating in order to see my work on your camera and you reviewing it ! As I see we re both in Europe so it won't be that hard :) Nice review for once more... I think I might get one too !!
I know its late but I also post reviews I would take up your cerakote offer if you are still up for it as I collect airsoft and 4.5mm air guns that look real I also use a HD camera so stop by
piece of shit airsoft. had to change a plastic part that broke in the blowback part. was able to remove one small crew all the others are way to tight and now stripped. fucking hell
Hrm... Yeah my magazine release screw snapped off when I tried to take it out. Sad when they lock them down that much. It's not like you can easily put heat on screws on GBBs without the risk of damage. Rather they tighten and lock them down less but most people never take their stuff apart. In the future if I find a tight screw I will soak it in WD40 and leave it over night and hope it loosens up. Otherwise you can heat it up with the hot-end of a soldering iron. I have heard of some breakages of the WE Desert Eagle, both slide and nozzle parts. Seems it might be a bit too powerful for the since and integrity of the design of the parts. Luckily you can get WE OEM replacement parts from KY Airsoft (www.kyairsoft.com/parts/we-pistols-gbbp/we-desert-eagle-50-series.html).
Yeah you can just use a tool to pop them out from the top of the magazine feed lips, push from behind and slightly from below of the feed lip. I usually use the back end of a magazine speed loader, which is plastic, as it doesn't damage the BB or the feed lips. But a screw driver also works but just be careful if you use metal/sharp objects.
![Tech-tip: Cybergun/WE Desert Eagle .50AE GBB reassembly guide - Slide [4K]](http://i.ytimg.com/vi/Chniyr1AEKk/mqdefault.jpg)
![Tech-tip: Cybergun/WE Desert Eagle .50AE GBB reassembly guide - Slide [4K]](/img/tr.png)
couldnt for the life of me how to reassemble the slide/barrel/recoil spring then watched the first minute of this video and realised how dumb I was. Thank you for showing a very easy way to reassemble so I can properly clean the gun.
The "slide to barrel alignment thingy" is actually a mock gas piston just fyi. I'm looking forward to seeing the frame disassembled
Ah, thanks! I did not know that :D
Hopefully you might have a suggestion for me. New cybergun. The barrel lifts off easy but the slide won't budge to disassemble. . I've done everything according to turltorials but no luck. Thanks
mine too. how did you get it off in the end?
Happened to me to you gotta slide it on straight towards the back no tilt
Did you remove the magazine my friend?
great upload, my brothers nozzle shit itself when he used some of that red nuprol extreme performance gas last winter, this really helped me take it apart and replace the damaged stuff.
Awesome! Glad you had use of the video :-)
Where did u locate the the parts? Having a hard time finding anything
@@mikelm6198 i found a replacement nozzle on redwolf, and a small spring for the nozzle on airsoftpro. Not sure if they still have them in stock though.
Great vídeo, only you didn't mention the weigth, how heavy or light are the parte ( barrel, slide without all the stuff you take of)
I actually had it included in the original footage but I cut it out of the edit to keep the duration of the video down :D
Slide (empty): 118g (super light!)
Barrel (empty): 164g
Non Existent wow!
Do you think the frame barrel and slide are made of aluminium? If they where made of pot metal will be more heavy right?
I mention this in the review video: th-cam.com/video/yBjkSdeBOR8/w-d-xo.html
And yes the main components, slide, barrel and frame are most likely extruded/molded and CNC finished aluminum.
So a standard GBB bucking, unlike in the TM Deagle?
I want to disassemble my gun and i can disassemble the barrel but my slide doesn't move. Can somebody tell me why? Is there a part of the gun which can block the slide?
How do you mean? You have to remove the magazine, make sure the gun is cocked and use the take-down lever to get the slide off.
@@CJAwesome83 ok i've forgot to cock the gun. It worked after that. Thanks for your help!
@@CJAwesome83
I have got he same issue.
I was able to remove the barrel.
*Removed the Magazine.
*Put the safety position to Fire.
*Take-Down Lever is down.
*Cocked the Hammer.
The Slide won't move at all, just a tiny bit forward. Gun is functional as usual.
Try racking the slide before you try to take it off. Might be something in the hammer mechanism that is protruding up into the slide preventing it from coming off.
@@CJAwesome83
Well, what i just did now is, racked the slide, and let it go, haha.
It is off now.
Does anyone know the size and length of the nozzle return spring? Think the one I had went missing, wanted to reassemble with a new nozzle after the old one shit itself for a friend.
Idk why, but when I got this gun only the handle came in, and the slide did not, is their some website i can buy the slide separately and for this same desert eagle.
I would suggest you contact KY Airsoft and ask for a quote on a complete slide kit: www.kyairsoft.com/
Great guides! Helps immensely in swapping out parts to build a MW2 style Deagle. Don't have to buy two more guns to swap out the entire slide and frame now.
I'm actually looking to upgrade the inner barrel at this point, do you happen to know the length?
Awesome, always makes me happy when someone finds my videos useful!
Unfortunately I do not know the exact length of the inner barrel for this pistol.
@@CJAwesome83 Replacement outer barrel just came in, and I measured it while everything was apart. Approximately 133mm in case anybody's looking for this information. I say approximately since the hop up cutout area is smaller, so a 133mm for something like a MK23 might recess further back into the outer barrel by like a millimeter or so. I'm sure that difference is insignificant, though.
Hi, my deagle can’t remove slide from the frame, any idea? 🙏🙏🙏
You just gotta be a little more forceful, without breaking anything :p
@@CJAwesome83 thanks, haha i did it
If the lever that connects the trigger comes off and the gun is cocked you will NOT be able to remove the slide. You'd think that something like this would be secured with a screw, but no, just a metal nub that inserts into a plastic hole connected to the trigger.
What about the lower part? You can't disassemble that? The metal clip behind the slide stopper has been bent on my first day of use. Fired around 50 shots and it bent and got out of the whole. I want to try straighten it out.
Here you go.
Disassembly: th-cam.com/video/VxMNNiiCPdg/w-d-xo.html
Reassembly: th-cam.com/video/7opX8Z9b0Ko/w-d-xo.html
I’m having trouble unscrewing the blowback housing, the screws are too tight and I’m loosing the Philips cross grooves, so they are basically stuck, I have a chrome one I’m working on and I don’t want the same to happen, please help
Hrmmm... Maybe try some lubrication and if you wan without melting anything apply some heat from a lighter or something like that. And make sure you have the rights side screw driver.
any way to remove the grip? EDIT: never mind i literally just got it less than 15 seconds later
Hi there mate, I broke my nozzle and the return spring is missing and I can't seem to find a replacement by WE. Any chance the Tokyo Marui brand is the same size spring as the one in the video@
TM is NOT compatible.
For WE OEM spare and replacement parts check out KY Airsoft at www.kyairsoft.com/
:D
Hi. Plaese help me. I want to remove the slide of my W.E D.E. but when i already released the slide pin, only the outer barell was remove and the other part(nozzle slide) remain. I cant remove this part..please help me.
Its a silver weagle. And i think its hitting on something. Or it has another lock?
You have to remove the magazine first to be able to take the slide off.
@@CJAwesome83 yes i remove the magazine
Well if you follow the video you should be able to disassemble the slide :o
@@CJAwesome83 yes i follow the steps on the video
I know this video is old but its worth a shot- I have the new L6 version and my shots are pulling to the left. Are there any reasons why this is happening? I've confirmed it's not my grip or any human error. I also do want to say thank you so much for these strip down videos. They are super helpful!
I’m so confused my barrel just popped off and I can’t get it back on
Watch this: th-cam.com/video/MnqPiHDBrKg/w-d-xo.html
Sorry, this one :p
th-cam.com/video/Chniyr1AEKk/w-d-xo.html
Can you do a video about disassembly the lower part?
Already recorded. Have to edit and upload :o
@@CJAwesome83 Any chance that could be soon? I've got this model and the hammer is locked and I can't quite figure out how to get the slide off.
@@CJAwesome83 Do you know of a way to release the hammer manually? Also, what does the button on the bottom of the handle do? I can't quite figure it out from the schematic, and it doesn't seem to do much but that's probably because the hammer is locked.
@@CJAwesome83 figured it out, the trigger bar was pretty thrashed; had to dremel it down
@@CJAwesome83 Could really need that video for my disassembly work on the grip.
Hey my saftey got stuck when I put it I safe and now i can’t take it off of safe what should I do
Look through the video and observe the steps for removing the safety selectors. There are some metals tabs under them that adjust the tension required to actuate it. You could just try putting some force into switching the safety lever.
To make it easier, lock the slide back to the rear (so it doesn't need to interface with the trigger bar in the frame).
To screw off the screws is it clock wise or counter clockwise
Here is a good rule of thumb: "Lefty loosey, righty tighty!"
Which means rotate to the left (counter clock-wise) to loosen, and rotate to the right (clock-wise) to tighten.
:-)
And those directions are when looking at the screw (or other rotating item) from straight on, i.e. for a screw, you are looking at the actual screw head. I mention that because I have gotten confused before regarding barrel threads if they are specified when screwing on/off from the front, or from behind (as you normally would on something mounted to a barrel).
Would you happen to know if there are any aftermarket accessories out for this gun or slide / frames?
Only thing that has been release are reinforced internals by RA Tech. Other than that, nothing.
Likely because this is still very new. Hopefully there will be more in the future. Thanks a lot!
Where's your video on disassembly of the lower frame?
:|
Recorded and waiting for editing and upload. I will try to fix it ASAP.
Do you have a page in facebook?
Yes I do! You can also follow me on some other platforms to stay up to date!
Website: www.nonexistent.nu/
TH-cam : th-cam.com/users/CJAwesome83
Facebook : facebook.com/NXAirsoft/
Twitter : twitter.com/CJAwesome83/
Instagram : instagram.com/CJAwesome83/
Mine just stopper shooting and now I can’t fix it
NOOB PLAYZ GAMZ Noh lasta nam man my nozzle exploded and the recoil spring is gone
Old Snay my spring works fine it’s just not releasing gas when I fire
Hey man, I’m having issues with my hop up unit, it’s just seriously inconsistent, some rounds fly straight at the ground, some pull to the right, most go where they should. I’ve adjusted it to all sorts of different settings, and taken it apart and put it back together, which made it slightly better but the issue remains. Do you’ve any idea how to fix this issue? Thanks I’m advance!
Not really. Except that try adding more hop up. If the barrels just roll out of the barrel that usually indicates that the BBs don't get properly retained by the hop up unit.
Non Existent unfortunately it doesn’t matter if the hop up is on max or not, the bbs are often flying with front or side spin rather than backspin, making them go to the side or down
@@failvids4all This may be quite late, but still, this is what I found out about my Cybergun Deagle:
The hopup also did not seem to work with my replica. BB's fly all over the place. When I peeked through the barrel (after having it taken out of the assembly), I only saw a round hole and no sign of any hopup bulge whatsoever, regardless how much I turned the screw.
I opened the unit and could not immediately see anything wrong with it. The hopup should work, as I could move the screw and get the tensioner onto the rubber, as expected. So, I closed it and then noticed that I could check the functioning without having opened it. There's a small hole at the top, where the tensioner arm and screw meet. So, I took a thin hex tool to puss onto the tensioner arm and looked through the barrel: there it was, the hopup bulge. Then, I turned the screw a few times.
Now I discovered the problem: the screw did not actually move the tensioner arm, as it is supposed to do.
I put some offset pressure onto the tensioner arm so as to allow the screw end to reach that condition, as it did not get to that position yet before. That did the trick: now, the screw end touches and retains the tensioner arm properly and the hopup bulge is visible through the barrel now.
Once I will have tested this, as soon as I get a chance to visit our airsoft center again, I will know for sure that this problem has been solved.
What's the size of hop-up adjust hex key?
1.3mm
soooooo my slide is just stuck...... it wont come off the rest of the frame.
You just gotta be a little more forceful, without breaking anything :p
Ra tech make a valve locker made of steel. What's the function of that part?
It's the part that locks the magazine valve knocker in place until the slide cycles back and releases it. Steel parts for additional durability I guess.
Non Existent thanks! I think is the part that's making the full auto issue
Hi bro ! How do you remove gront sight ? Fighting to remove it but nothing :-(
I think I mention it in the video but I did not manage to remove mine either. You have to press down the spring loaded mechanism/bearing and push it out but it is very difficult :|
Non Existent very thanks from italy !
Is the outer barrel threaded like all other WE pistols?
No, it does not have threading inside the outer barrel to install an adapter or silencer. Instead it has more realistic "fake" rifling inside the muzzle of the barrel.
@@CJAwesome83 thank you. I've been trying to figure this out for a long time
What is the length of the inner barrel?
I did not measure it unfortunately.
@@CJAwesome83 for some reason no were says the length of the inner barrel.
@@osamasforeskin6050 it's 133mm, so any barrel for a TM Desert Eagle would be the right length
Mine is co2 powered not the same right?
No, that would be a KWC Desert Eagle.
Hi again!, xd you can use the vsr hopup bucking on the desert e.?
Yes I mention this here: th-cam.com/video/MnqPiHDBrKg/w-d-xo.html
By the way, the size of the nozzle is:
Inside diameter: 17.0mm
Inside depth: 42.0mm
Volume: 9.53cm^3
Is it the same system as Marui？
No, not compatible with TM Desert Eagle.
Non Existent Thats...kinda sad. WE typical copies marui‘s system for gbb pistols. Not doing so means less aftermarket parts.
Can you please do the frame too
The videos are already recorded, need to edit and upload them. Coming this weekend!
Is it possible to install an npas in this?
Don't know. :o
where's the frame video?
Pending editing, rendering and upload...
Anyone have the outer barrel broken?
I've heard about one or two instances of broken barrels on a forum. Seems they were used very heavily before failure though. Oh well, that's why KY Airsoft exists for spare parts :-p
do you know how to make it shoot more fps?
Merci pour cette vidéo très sympa
awesome video! it helped me a lot.
Great, glad it was helpful! :)
What do you mean by all black Look😂
Hey I could use a suggestion. I field stripped it to clean it, but now it won't go back far enough for the slide catch to grab.
Make sure the recoil springs are seated properly. Make sure your magazine is out. Make sure your hammer is cocked. Make sure that the disassembly lever is in the down position. If it still won't go on, try pressing on the muzzle backwards. If that fails, well, be a little more aggressive, it should go on :p
Thank you so much!
No problem mate :-)
Would you like to Cerakote it ? If yes I would love just to offer you for a free a coating in order to see my work on your camera and you reviewing it ! As I see we re both in Europe so it won't be that hard :) Nice review for once more... I think I might get one too !!
I know its late but I also post reviews I would take up your cerakote offer if you are still up for it as I collect airsoft and 4.5mm air guns that look real I also use a HD camera so stop by
Bravo supert vidéo Merci
Thanks, glad you like it! :)
10:20
Good dedication, but a bad vocabulary lol
piece of shit airsoft. had to change a plastic part that broke in the blowback part. was able to remove one small crew all the others are way to tight and now stripped. fucking hell
Hrm... Yeah my magazine release screw snapped off when I tried to take it out. Sad when they lock them down that much. It's not like you can easily put heat on screws on GBBs without the risk of damage. Rather they tighten and lock them down less but most people never take their stuff apart.
In the future if I find a tight screw I will soak it in WD40 and leave it over night and hope it loosens up. Otherwise you can heat it up with the hot-end of a soldering iron.
I have heard of some breakages of the WE Desert Eagle, both slide and nozzle parts. Seems it might be a bit too powerful for the since and integrity of the design of the parts.
Luckily you can get WE OEM replacement parts from KY Airsoft (www.kyairsoft.com/parts/we-pistols-gbbp/we-desert-eagle-50-series.html).
Is there any way to eject bbs from mag manually? I put too much in and it’s stuffed
Yeah you can just use a tool to pop them out from the top of the magazine feed lips, push from behind and slightly from below of the feed lip. I usually use the back end of a magazine speed loader, which is plastic, as it doesn't damage the BB or the feed lips. But a screw driver also works but just be careful if you use metal/sharp objects.
@@CJAwesome83 thanks!!