RC Tanks & Trucks 24/7 have heard on one of the forums that the Cheetah CVD's and axles will fit the Bison giving you the option of using different wheels/tyres with standard 17mm hex. I don't have a Cheetah so can't check for sure. But it's an option I guess.
Would be nice to see a video on setting up a car with all the trimming and getting the car running nice I've just recently got arrma Nero 6s and as a newbie would be nice to see a video 👍
I have the same flysky controller I have my exponential set to -25 on Channel 2 . In order to smooth the acceleration and save on pinion gears . I can still do Willys however intention is required as the power delivery is more linear
Hey man I broke my jlb cheetah and I went to the customer support section and they want me to send them a video of what is wrong. They have acceptable formats but my parents went to a computer place and all the formats they have are only used for pictures. How shall I send a video to them?
Hey guys just got my Cheetah! ! ! ! But i did something wrong already. For some reason the car will not BRAKE going forward, only backwards? what did i do? I tried the reverse switch on transmitter but it makes everything backwards. 🙁
My stock wheel fell off, and I cannot for the life of me get it to fit back on. Any tips? I've tried heating, cooling, and grease but the ball thingy won't fit in the hole on the wheel. Thanks
RC Tanks & Trucks 24/7 Thanks Steve, hey be careful and don't get too much traction with those new tires. I have broken 2 pinion shafts right where the pinion gear attaches inside the rear gear box. I run mine one concrete, asphalt, and grass mostly. Broke the first a few months ago on 3s and then again today in the rain on 4s. That seems to be a weak point.
Thanks man, here are the links Controller - www.crazyhobbies.com.au/electronics/surface-radios/flysky-fs-gt3b-2-4ghz-3-channel-transmitter.html Receiver - www.crazyhobbies.com.au/electronics/surface-receivers/fly-sky/flysky-gr3c-receiver-3-channel-2-4ghz-w-failsafe.html Tires - www.crazyhobbies.com.au/proline-badlands-3-8-traxxas-style-bead-all-terrain-tires-mounted.html
badlands is wat i put on my original cheetah but i gorrila taped the inside of them before installing them on the rims & they dont ballon at the pre glued badlands will still ballon not as bad as the stock cheetahs but the badlands cannot be beat
The problem of the cars imported from China is only the tax for importation very expansive . Jbl Cheetah is a wonderful cars but is impossible buy for tax
Soo I got my original cheetah in Christmas and it's my first rc car. Two days ago I was riding it and it just stopped. So I turned it off and on and it went for about 2 seconds and stopped again. It won't even steer or move at all. Every time I turn it off and on it only drives for about 2-3 seconds. When I turn the wheel sometimes the lights go dim even though the car doesn't move at all. If any one could tell me what's wrong with it I'd appreciate it because I don't know much about rc cars at all... thanks!
Wesley Boyett sounds like your low volt cutoff is kicking in get you a program card & make sure all the cells in your battery are good you cant use the cheap 1 that the car comes with
Wesley Boyett yes they will work but you cant tell how many volts are in each cell..it just tells you with green or red lights if its "charged" trust me buy even a cheap imax charger that will tell you wat each cells at
How I the heck did you get the original wheel off? There's a little plastic lip that seems to catch on the threads, so I cannot pull the wheel off. I blew my back two out after installing a Mamba Monster 2 I the cheetah and running a 6s :D Fortunately I ordered a spare set of wheels after blowing one out before, but I repaired it with tire glue and it actually held up. It blew out again, but in a different place and for a different reason, ha. I'll post video of the Monster 2 on 6s as soon as I'm running again..so yeah... Any tips for taking the wheel off? Thanks!
Helpful.was thinking about purchasing the Badlands 3.8.
Problems removing the one tire.. had to cut the tire in order to remove this .. badlands
I've got alot of new mods on my 21101 120a extreme. You'll get a kick outa them once you see it. I will send over a link once finished.
Nice upgrade. One of the advantages of the Cheetah over the Bison is aftermarket wheels/tyres.
+Ken Trapnell yeah good point man
RC Tanks & Trucks 24/7 have heard on one of the forums that the Cheetah CVD's and axles will fit the Bison giving you the option of using different wheels/tyres with standard 17mm hex. I don't have a Cheetah so can't check for sure. But it's an option I guess.
Would be nice to see a video on setting up a car with all the trimming and getting the car running nice I've just recently got arrma Nero 6s and as a newbie would be nice to see a video 👍
Thanks for the idea Dave.
Now that's a sweet looking upgrade
Yeah these tires look sweet plus the receiver should get some extra range that I need
Nice wheels.....I have heard the Badlands are awesome. Looking forward to seeing them in action on that rig. =)
Thanks Susan, video coming soon
Cool! =)
Link for the 2.72 X 5.85 Badlands please, I can not seem to find them...please help!
My personal opinion is you can't go wrong with PROLINE they are a great tyre
+Shayen RC Enthusiast. Yeah man, they are awesome. Super sticky like glue :)
Where can we buy badland tyres, i am not able to find any on web.
I have the same flysky controller
I have my exponential set to -25 on Channel 2
.
In order to smooth the acceleration and save on pinion gears
.
I can still do Willys however intention is required as the power delivery is more linear
+niceguy60 awesome, thanks for the tip. Might try it.
i love my cheetah!!!
Good to hear :)
Hey steve Is there a specific offset or anything? I saw they have 1/2 offset on some or just the 3.8 badlands with no offset? Thanks!
+Chris Watson there is but the badlands fit like a glove
Do you happen to have a link for the Tires & wheels?
Just search for proline badlands
@@RCTanksTrucks247 I figured that!
@@RCTanksTrucks247 no there are several ones
If my english is bad its because I'm from germany
Hey man I broke my jlb cheetah and I went to the customer support section and they want me to send them a video of what is wrong. They have acceptable formats but my parents went to a computer place and all the formats they have are only used for pictures. How shall I send a video to them?
Hey man, how about uploading a video to youtube? That way anyone can view it
RC Tanks & Trucks 24/7 I will try. Thank you for the good idea
Did they end up ballooning less? I can't stand how the stock ones balloon
They still balloon but no way near as bad as the stock tires
Any heat sink fan for the motor recommendation?
Never use one
Where can I get these tires for my car?
They are proline badlands
@@RCTanksTrucks247 but there are many badlands on the market, also for crawlers... I think
So you could tell the actual product number.
Hey guys just got my Cheetah! ! ! ! But i did something wrong already. For some reason the car will not BRAKE going forward, only backwards? what did i do? I tried the reverse switch on transmitter but it makes everything backwards. 🙁
hi from where can I buy original jlb battery ... thanks
My stock wheel fell off, and I cannot for the life of me get it to fit
back on. Any tips? I've tried heating, cooling, and grease but the
ball thingy won't fit in the hole on the wheel.
Thanks
Hey Steve, have you heard any word on after market parts for the Cheetah? Maybe some metal suspension parts like control arms etc?
+Reid Travis sup man, nah not yet. Just standard replacement parts so far.
RC Tanks & Trucks 24/7 Thanks Steve, hey be careful and don't get too much traction with those new tires. I have broken 2 pinion shafts right where the pinion gear attaches inside the rear gear box. I run mine one concrete, asphalt, and grass mostly. Broke the first a few months ago on 3s and then again today in the rain on 4s. That seems to be a weak point.
@@servantsglassllc they have metal suspension parts now on banggood.
is there any possibility of doing a review of Turnighy Trooper Pro ARR version...
Tnx!
Never heard of it, I will have a look
Hi Mate , May I ask about if I upgrade Motor for this RC car then I can fit in with Castle 1512 motor or not ?? Motor size is 4074 .... Tks
It would fit if you took out the plastic divider between the motor and ESC.
Do you have a link for your remote too? Great video reviews.
Thanks man, here are the links
Controller - www.crazyhobbies.com.au/electronics/surface-radios/flysky-fs-gt3b-2-4ghz-3-channel-transmitter.html
Receiver - www.crazyhobbies.com.au/electronics/surface-receivers/fly-sky/flysky-gr3c-receiver-3-channel-2-4ghz-w-failsafe.html
Tires - www.crazyhobbies.com.au/proline-badlands-3-8-traxxas-style-bead-all-terrain-tires-mounted.html
Cesar Marin you can get this same controller off EBay for under 40$ free shipping
Can I have the tiers update link or reference plz
do you know of any wheels that fit the Vkar bison?
how is the cheetah holding up after the 4s run//////////////////
+ruben mendez so far so good. I have to do another speed run video
Can't wait to see that next speed run video......
badlands is wat i put on my original cheetah but i gorrila taped the inside of them before installing them on the rims & they dont ballon at the pre glued badlands will still ballon not as bad as the stock cheetahs but the badlands cannot be beat
+Mark Vonville thanks man, they definitely are much better than stock.
The problem of the cars imported from China is only the tax for importation very expansive .
Jbl Cheetah is a wonderful cars but is impossible buy for tax
Gabriella Taddei in the us they are only $350 us free shipping or around 320 pounds (rough estimate)
I got mine for 169 Pounds Just after Christmas on ebay
new in the Box , I ve waited 3 Months for the right time
Soo I got my original cheetah in Christmas and it's my first rc car. Two days ago I was riding it and it just stopped. So I turned it off and on and it went for about 2 seconds and stopped again. It won't even steer or move at all. Every time I turn it off and on it only drives for about 2-3 seconds. When I turn the wheel sometimes the lights go dim even though the car doesn't move at all. If any one could tell me what's wrong with it I'd appreciate it because I don't know much about rc cars at all... thanks!
Wesley Boyett sounds like your low volt cutoff is kicking in get you a program card & make sure all the cells in your battery are good you cant use the cheap 1 that the car comes with
Mark Vonville I've been using it for both the batteries and it's beenfine
Wesley Boyett yes they will work but you cant tell how many volts are in each cell..it just tells you with green or red lights if its "charged" trust me buy even a cheap imax charger that will tell you wat each cells at
Mark Vonville ok thx
Wesley Boyett your welcome
How I the heck did you get the original wheel off? There's a little plastic lip that seems to catch on the threads, so I cannot pull the wheel off. I blew my back two out after installing a Mamba Monster 2 I the cheetah and running a 6s :D Fortunately I ordered a spare set of wheels after blowing one out before, but I repaired it with tire glue and it actually held up. It blew out again, but in a different place and for a different reason, ha. I'll post video of the Monster 2 on 6s as soon as I'm running again..so yeah...
Any tips for taking the wheel off? Thanks!
Monetised video? i follow many rc reviewers, even with much more subscribers, none of them monetise their videos. Many publicity for a webshop also.
+Rc addict are you sure mate? Nearly all TH-cam channels monetise their videos.
whats app man