Goofing around with a Keithley 2461 SourceMeter
ฝัง
- เผยแพร่เมื่อ 2 มิ.ย. 2024
- Keithley 2461 SourceMeter www.tek.com/source-measure-un...
Keithley Graphical Multimeter www.welectron.com/Keithley-DM...
Patreon: / marcoreps
Almost but not quite as good: bit.ly/2kM1uCv
CERN straws and more: / gigabecquerel - วิทยาศาสตร์และเทคโนโลยี
I might have another one ... how long do you guys need to recover from this one?
2 minutes
If only all of those equipments weren't so expensive
Always ready Marco!
Ready now
Give plz
can we call you the "this old electonic tony"
This Old Hip Electronic Tony.
@@aserta ToheT? I'd prefer This old Marco, or This electronic Marco
Wow, they sent you that! I only have a 2450 and 2460... the 2461 is just a dream now at $9,600 USD.
I love the interface, the Kickstart programming software is pretty easy to get going, and they have lots of good examples. The only difficult thing was figuring out how to have the different source meters and DMMs communicate over TSP-Link so that one device can trigger readings on another device to characterize a DUT. But their field engineers answered my questions and provided more examples.
I hope to see more with the 2461!
finally. a new video from marco reps.
Thank for sharing it's awesome hearing you excited about your new "toy".
Happy crafting
Yeah, Marco. I can see why they sent you the 2461 :-) The 2450 only goes up to 1 amp. Awesome kit.
Nice to hear form you. I had been a couple of months since the last upload.
Man I checked your channel half an hour ago If I missed any of your recent uploads and bham....
thanks for your content man.
Pretty impressive tool, dude! Fantastic! 😮
For testing escs for noise it should be beautiful! ❤
As usual this is a fantastic video and as usual I only understood perhaps half of what it was about.
That was a super interesting video. For my taste it ended too soon but was very informative. The Keithley 2461 is not a loaner like the rohde und schwarz oszilloskop? I would love some more experiments with the stuff you got in your lab. Are you going to compare it to your Osmu or is that project dead?
When will we get an update on the OSMU? I am really excited to see it
Oooff what a charmer, I bet that 2461 makes an adult giggle like a 2-year-old while working with it, Screams hardcore R&D.
Interesting to see the solar cell readind withe flashing light. The light flashed appropriately warmed up and cooled off quicker than it could fully peek. And level off.
Thank you for this video uploader. 🤗
We need that CNC video!
I was really interested in getting the 2470 to replace our aging fleet of 2410's with its newer features and better display and interface options. Sadly where it claims the same 20W, it can only do 10mA at 1000V where the 2410 can do 20mA at 1000V. The design of the 2410 is over 20 years old and only sports a GPIB remote interface. You would think that newer would be better; but I guess that is not always the case.
"Lua like language" you have my attention now!
Great instrument
Thanks for sharing 👍😀
9.22 "Food my contain human flesh" - I guess someone's watching Bob's Burgers ;-)
Sourcemeters are one of the best products from Keithley
I was looking at that block diagram and thinking to myself "Man this would be awesome if it was scriptable in Lua or something" -> Is literally Lua scriptable. That's so awesome.
When I see Marco Reps, I play, I like
Pavlov???
finally a new video !
Ah, these kinds of diodes... I still have to source some really good inexpensive ones for those scintillation chrystals to try build a gamma spectrometer...
Nice development since the 238 model.....although I got a bit short in breath when the 45W laser entered the game visually screaming "Lock'n load!" :D
THE TIME HAS COME
So you're gonna take the protective film off of the screen yeah?
I only came here for Tetris. But I don’t regret it.
This and @TheSignalPath are the EE versions of "Mansions of the Rich and Famous". ;-)
Wow, I wonder if you can connect GPIB floppy drives to that thing! I have a few Commodore IEEE drives and I know someone who has an HP 3,5" drive. (:
Damn, I need to start making electronics videos now
More More More .....i Need this Videos!!!!!!!!!!!!
They should give it a brushed metal front and sell it as a really high end power supply for hifi components.
then they cold easily sell it for 15k! ;)
I don't give likes to a lot of videos, but you make excellent content, but I have to give you thumbs up very time. Thanks a lot for excellent content ( ;
This is the first time I ever heard/seen a SourceMeter. A very fancy and probably pricey instrument.
Made in China. Probably means eventually there will be a Chinese brand offering similar features at a fraction of the price.
What one wouldn't give to have one of those on one's bench.
Though, I don't really do anything where such an instrument would be needed.
But a 4 quadrant power source/sink with decent measurement capabilities wouldn't be a bad thing to have on the other hand....
I want one!
"they have a fantastic part number S1337" (-8
Long time no see
I guessed € 10.000, which I think is not bad, considering Tek's reputation. How did you get your hands on this one Marco, with a Glock and a ski mask?
But can it run Crysis?
Doom maybe better suited for this
45W laser next vid? I'm hyped
nope, 'only' 20 (:
@@reps bah. not 'enough'! :)
Are you the son of one of the guys in Kraftwerk? Your voice makes me smile like their music does.
Does this mean you have an 'old / surplus to requirements' 2450 to sell??? I'll open the bidding with an ultra-cheeky $100
I would say I'm jealous...
Which is why I'll now say, I'm jealous.
nice ave sticker
Damn, he send you two very special photodiodes!
The selling of these diodes is strongly restricted.
Why are they restricted? Because they are so darn sensitive and expensive?
I'm pretty sure I got a couple of those from RS Components.
@@DrakkarCalethiel Yes, because of there sensitivity.
Less than 100€ on distrelec
www.distrelec.ch/en/ir-photodiode-960nm-hamamatsu-s1337-66br/p/17522097
Not that expensive and I still don't know what evil I could do with one and why sales would be restricted....
@@schnibbelwind91 that doesn't make sense at all though, they would just be more pricey, not restricted. did you instead mean that not that many people purchase them due to price?
0:30 My ocd is seriously flipping out that the "A Tektronix Company" isn't centered under "Keithley".
I wonder, do you think you would be able to test a product called EMP Shield? They claim to be able to protect your house or car's electronics from and EMP or CME. Aparently the US government is using them too but they've never demonstrated it. I only understand the absolute basics of it all but I though if anyone might know how to do this, it would be you. Just a random thought.
ReUpload? Or I have deja vu.
Unfortunately no firmware hack with Tetris as thumbnail suggests.
Nice, I wonder if I can get tektronix to send me something to review.
I mean ... you got the top of the line digital tester already, so everything else is really just gimmicks
LOL, indeed... who needs all this graphical LCD display rubbish anyway?
@@TheDefpom i need them 😂
After my amateur lab was robbed and I lost everything I had collected in my life, I take everything anyone gives me 🤣
The SMU is a wonderful machine, but if I wanted to buy it in the Czech Republic, I would have to sell off my body organs 😶
Nice day 🙂 Tom
Is it possible to both hate you and want to be you at the same time? I'm so green... Damn, now I clicked like...
NIIIIIIICCCCCCCCCCEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEE
Sanity check had me cracking up
How much is it?
about the warning labels- they made me sick. I have "warning label indifference syndrome" Its from having warning labels everywhere stating stupid things and my mind blocks it out now. I also have beeper/alarm/beacon/siren indifference syndrome.
.........Dear Santa.......
👍👍👍
Amazon's price € 13217,86
is 33 your favorit number?
Hual 10 grand meter, I never will have one like this
where is the tetris ?
When I clicked LIKE the count went from 665 to 666. My evil twin made me do it.
OSMU please...
这撒玩意！精度这么高
9.6k usd
What's cheaper, buying a proper laser power meter or buying a crazy-expensive multimeter and an obscure "1337" photodiode and going that way. Jury still out..
That cost the price of 10,000$!!!
Did he just casually toyed around with a 5W laser?
Stefan Giehler, that's a 45W laser module that he showed in a previous video.
th-cam.com/video/slBgqqWTpEM/w-d-xo.html.
According to the datasheet, that module output a wavelength of 808nm and operate at a current of 59A.
You can search for the datasheet by typing "jold-45-cpxf-1l.pdf" into Google.
"DOOM".... :D
1337 LEET
Yes!! I've been waiting for you to show new toys! Did you get a woman in your life? lol
1337 lmao nice
was riecht hier so teuer
hey
Throw the e-cigarette away
I'm using the 2460 in a laboratory of semiconductors , it cannot recognize my storage device (i tried in different configurations as fat32 and ntfs), also it doesn't have the histrogram option.
I need help
Marco I think you have a little bit too much time on your hands... (or you're a little bit crazy) [so am I!]
Sleet
mein gott, das ding kostet doch bestimmt 100k ^^
Please send me one.
Just 8k pounds... :D
Mhh.... It's okay, not like it's a 2651A or anything. (-;
I see an AVE sticker owo
Have you seen air bearing CNC accurate to one single micron? Here’s a link to a prototype design. th-cam.com/video/sFrVdoOhu1Q/w-d-xo.html
the plastic
Man merkt das du deutsch bist.\(●.●)/
dood
Made in China!
I DON'T LIKE CLICK BAIT! UNSUBSCRIBED