HI, My Internet is slow, but camera and phone with icsee will be connected to the same network/router, will my camera work without problem? With slow Internet? In lan mode? Thanks
greetings, If possible, a little help. I recently bought a 4g Icsee camera. I can't set the camera alarm to notify me of any change or movement on my phone. please help me
Anyone help please? My Icsee CCTV Camera only records 10 seconds each alarm, also there are times that it skips recording like it will not record for a couple of minutes or hours then back again. I am subscribed to their cloud service, I had already sent an feedback but it has been months and no response.
I think its just china services. They dont respond too. Unsubscribed from cloud and newer got my money back. Get a Hiseeu cam or Ezwiz. Maybe their services are better. Because my notifications stoped working suddenly too.
Hello Jane Kung and Anyone, the current iCSee version 6.9.2 doesn't have the "INTELLIGENT VIGILANCE" feature! Can you (or Anyone) tell us which version of iSCEE you were using in this video. I've found some older versions (v6.7.6, v6.5.1, v6.0.1 and neither of them have the "intelligent vigilance" feature either. If anyone knows plz post version and perhaps a link to that version! Thx
Which version do you have for the iCsee app that’s used in the video? Is it offered by huangwanshui? How can you get to the Config Wizard page to select Storage Method; then Local Storage Regular (continuously recording) and not just have it on the Alarm (Record only when an alarm is triggered) option? Or do you have to config everything all over again with the QR code. How do you get it to record the entire time?
I my case, I have to add Wifi network credential in ICSee app first and than the wifi camera scans a QR code shown in the ICSee app. After successful configuration, camera gets added in ICSee app from where the camera can be controlled. My camera was already connected to one Wifi Network. I factory resetted it and than tried to configure it on some other Wifi etwork in my home. Now I am gettig following error "Error content:Too many login errors. Please try in 10 minutes." when Wifi camera scans the QR code shown in ICSee app. Although the camera gives an audio indication "Connected to router successfully." but immidietly after this voice, I get above mentioned error displayed in the ICsee app . Any idea why this is happening, any solution for this issue? Usuelly, ICSee app asks for login password after the camera gives sound "Connected to router successfully". I think that login password for my camera is not getting resetted even after hard resetting the camera multiple times.
@@janekung1621 I have R80X20-PQ cameras... is there a way to make them occasionally sweep the area then return to watching position, without my intervention on this app, or do I need anything else to install? Thanks
Can you please help me? At night, the camera automatically turns on its bright light... I don't want it to have light at night. I toggled the infrared setting but the light still didn't go off. It's really weird that the cameras have bright lights at night, it's just causing more attention.
Can you lease make a video on how to set and use Presets. I have made 4 Presets in Advanced Settings but can’t find how to use them. Your tutorials are very clear, one of the best I’ve found. Thank you
Tq miss . Please do another video that include all the thing in the app that maybe not many people know how to use it or know what function it is and how to do it . i am so interesting and wanting to learn it more😁 , feel good and secure right😁 went u are not at home but still can secure it all . I hope u will do with the best like this video and feeling want to do this video while u want to do other on your app i think it feel more relax😄 .
Hi Jane thanks for this instruction. I do have a question in the section Intelligent Vigilance is there an option "show traces" can you explain this option as well? Greetings from the Netherlands
Nice video
HI, My Internet is slow, but camera and phone with icsee will be connected to the same network/router, will my camera work without problem? With slow Internet? In lan mode? Thanks
greetings,
If possible, a little help.
I recently bought a 4g Icsee camera. I can't set the camera alarm to notify me of any change or movement on my phone. please help me
hello everyone, ask ko lang theres way of downloading the footage, for police. SD card file format not played on laptop.
How can I put camera to ''private mode'' or ''sleep mode'' ?
I have icsee app and hardly anything works like all the other views on the app, tell me which app have you got.
How do I set it up for text message notifications?
Is there any way to disable the date time code on the cameras?
One day notification stopped working. I dont know why. I think its because of china servers and services. Camera is good but services…
Same here, i get like 50% of notifications
Anyone help please? My Icsee CCTV Camera only records 10 seconds each alarm, also there are times that it skips recording like it will not record for a couple of minutes or hours then back again. I am subscribed to their cloud service, I had already sent an feedback but it has been months and no response.
I think its just china services. They dont respond too. Unsubscribed from cloud and newer got my money back. Get a Hiseeu cam or Ezwiz. Maybe their services are better. Because my notifications stoped working suddenly too.
Hello Jane Kung and Anyone, the current iCSee version 6.9.2 doesn't have the "INTELLIGENT
VIGILANCE" feature! Can you (or Anyone) tell us which version of iSCEE you were using in this
video. I've found some older versions (v6.7.6, v6.5.1, v6.0.1 and neither of them have the
"intelligent vigilance" feature either. If anyone knows plz post version and perhaps a link to
that version! Thx
Which version do you have for the iCsee app that’s used in the video? Is it offered by huangwanshui? How can you get to the Config Wizard page to select Storage Method; then Local Storage Regular (continuously recording) and not just have it on the Alarm (Record only when an alarm is triggered) option? Or do you have to config everything all over again with the QR code. How do you get it to record the entire time?
Do I need to pay for the subscription!? That’s what I’m wondering or does it get saved automatically
Hello, I would like to ask if there is a way to set a predefined time in ICSEE to run Auto Track during the day?
I my case, I have to add Wifi network credential in ICSee app first and than the wifi camera scans a QR code shown in the ICSee app. After successful configuration, camera gets added in ICSee app from where the camera can be controlled.
My camera was already connected to one Wifi Network. I factory resetted it and than tried to configure it on some other Wifi etwork in my home.
Now I am gettig following error "Error content:Too many login errors. Please try in 10 minutes." when Wifi camera scans the QR code shown in ICSee app. Although the camera gives an audio indication "Connected to router successfully." but immidietly after this voice, I get above mentioned error displayed in the ICsee app .
Any idea why this is happening, any solution for this issue?
Usuelly, ICSee app asks for login password after the camera gives sound "Connected to router successfully". I think that login password for my camera is not getting resetted even after hard resetting the camera multiple times.
Hi THx for the video. Is this the pro version? I can not set automatic lighting when movement is detected on my app ICSee
P2-X30
@@janekung1621 I have R80X20-PQ cameras... is there a way to make them occasionally sweep the area then return to watching position, without my intervention on this app, or do I need anything else to install? Thanks
Plese help. One of my cameras doesn't show events on video timeline with the red markings like my other cameras how can i fix it
I got my solar IC See camera yesterday. Glad you made this video about the bells and whistles. And navigating through it. 👍
Notifications are not reliable in my case. I am not getting them on my phone every time, that sux
Can you please help me? At night, the camera automatically turns on its bright light... I don't want it to have light at night. I toggled the infrared setting but the light still didn't go off. It's really weird that the cameras have bright lights at night, it's just causing more attention.
Can you lease make a video on how to set and use Presets. I have made 4 Presets in Advanced Settings but can’t find how to use them. Your tutorials are very clear, one of the best I’ve found. Thank you
What does the feature "automatic highlight" do when activated?
How many cameras could work on the app ???
Tq miss . Please do another video that include all the thing in the app that maybe not many people know how to use it or know what function it is and how to do it . i am so interesting and wanting to learn it more😁 , feel good and secure right😁 went u are not at home but still can secure it all . I hope u will do with the best like this video and feeling want to do this video while u want to do other on your app i think it feel more relax😄 .
Hi Jane thanks for this instruction. I do have a question in the section Intelligent Vigilance is there an option "show traces" can you explain this option as well? Greetings from the Netherlands
Hi Jane! Thanks this video :) Please help me to use and set up cruise control option
Excellent video. Thank you!
how to setup default ptz position if camera restarts? As my. goes always to main position.
tnx!
You need to set your camera to the position you want and then click on Automatic Tracking and then scroll down and click on SET WATCH ... 😉
@@patrickpatp8329 tnx! But will it keep tracking then? Because I want it to be static on the set position.
how can i find the ip address thank you this video is not running good
Hi. Can you help me to set the initial position (I think preset point) after electricity restoration?
You need to set your camera to the position you want and then click on Automatic Tracking and then scroll down and click on SET WATCH ... 😉
how can i record the video i wanted to record (i selected)
I don’t see smart alarm on my setting???
thanks 👍👍👍
how to video the camera when I'm away from home?
thank you :)
Thanks a lot 😁😁😁
Hi my apps ICSEE PRO and I cant connect 2 cameras on one apps. Maybe did you know how į can do that? Thanks
Dont use Pro.