Nice, glad you fixed it man. I'm wondering if replacing my CAS would fix MY problem. Basically I'm having the same issues but mine cranks no start. Also Terminal 50 I see yours just clicks once.
Hey there I’m currently having same problem 2010 bmw 323i exact same problem as you wasn’t to start but won’t I found the CAs and seen I have the same broken spot as you, did you just get a new CAS and switch the pieces over or did you have to program or code ? Thanks hope to hear from you
Man I’m having this exact issue I’m not getting enough current to my starter also on the battery side negative sensor there’s 3 wires the red one have over 12 volts the white &blue also have same bolts but the gray one has nothing unless move it back and forward I was thinking to get the sensor but after seen this not so sure now 😢
Cas burns when engine has a bad negative cable(copper cable from body to the engine about 20cm long) It burns first and after cas starts use negative from circuit board
Hi. I have bought a bmw 328i Xdrive 2009. Both of the keys run the car but don't unlock the doors. I checked the fuses but they are Ok. I replaced the battery of the fob but still don't unlock the doors. The button on the dash of the car unlock the doors. The previous owner told me that the keys need programing. I want to asking If keys run the car but don't unlock the doors, is programing needed? thanks
I got a 2008 bmw 335i the CAS is burnt in the same spot as urs it came with a new key I need to get it cloned and program the key but I can’t find no one in Utah can you help me out
Same!! I've had it to 2 different BMW mechanics who tell me no codes are popping and they'll try to fix this or that costing me over $3,000. Soon as I get it back each time it glitches out again but when I take it to the shop it doesn't do it.
@@MadmanCarOk thank you for the reply ! Now I also have the same issue with a no crank no start do I just need to replace it and get a new key programmed for the vehicle ?
I don't know your situation,if you diagnose that ews is dead then if is need change write a new chip, and ISN synchronization with the old ECU @@jayhernandez8160
Hello I have a bmw 745 li 2003 I changed my battery and not recognizes the key fob, it says “incorrect key” and throws me back the key fob when I put in in the key slot, should I reprogram the key or change the entire CAS and ECU and get a new key
Hey I’m I’m having the same problem with my 2008 x5 4.8i it’s reading cas ews will this work and did you buy another module or modified the Original 1 ?? Thanks
Nice, glad you fixed it man. I'm wondering if replacing my CAS would fix MY problem. Basically I'm having the same issues but mine cranks no start. Also Terminal 50 I see yours just clicks once.
Did you ever fix the issue? I’m having the same exact problem
You fix it ?
@@Foreignsgarage444 yup, it was my Fuel Sending Unit
Why not just repair the resistors if the chip was still good?
Hey there I’m currently having same problem 2010 bmw 323i exact same problem as you wasn’t to start but won’t I found the CAs and seen I have the same broken spot as you, did you just get a new CAS and switch the pieces over or did you have to program or code ? Thanks hope to hear from you
Really thanks for the idea! Let's see who wants to swap that piece. Because I'm not so good at soldering
Mine cranks and starts in the morning. After a run, it gets trouble turning over and has to sot for an hour then starts. Could it be the CAS?
Check your codes
Same problem 😢
Man I’m having this exact issue I’m not getting enough current to my starter also on the battery side negative sensor there’s 3 wires the red one have over 12 volts the white &blue also have same bolts but the gray one has nothing unless move it back and forward I was thinking to get the sensor but after seen this not so sure now 😢
Is this a silent DYI?
They should put a cooling fan on it. Mine only messing up after sitting in the parking lot at work for 10 hours in 100 degree weather.
Same for me
The sound your car made when trying to start would've terrified me
How did you know the CAS had problem in the circuit board?
Cas burns when engine has a bad negative cable(copper cable from body to the engine about 20cm long) It burns first and after cas starts use negative from circuit board
Hi. I have bought a bmw 328i Xdrive 2009. Both of the keys run the car but don't unlock the doors. I checked the fuses but they are Ok. I replaced the battery of the fob but still don't unlock the doors. The button on the dash of the car unlock the doors. The previous owner told me that the keys need programing. I want to asking If keys run the car but don't unlock the doors, is programing needed? thanks
Yes, the keys need to be programmed because the engine start system is different from the door lock system
I got a 2008 bmw 335i the CAS is burnt in the same spot as urs it came with a new key I need to get it cloned and program the key but I can’t find no one in Utah can you help me out
I found a guy in Florida to fix mine ecumaverick
@@hondakidd303 I need mine cloned as well. Will give him a shot
Would this work on a mini Cooper. My mini did the same thing. It wouldn't start so I changed the cas now it cranks but won't start. Please help
Check your battery if the battery is good then it can be maybe the fuel pump.
الله يقويك
Ameen these is beautiful cars I will be getting one soon inshallah
If you read the eeprom and the flash and writer to another donators cas3 will work or is better this way ?
hello, I don't understand your question
I got similar problem my car but not even my OBD2 is reading anything
Same!! I've had it to 2 different BMW mechanics who tell me no codes are popping and they'll try to fix this or that costing me over $3,000. Soon as I get it back each time it glitches out again but when I take it to the shop it doesn't do it.
Where is it located ? 2008 BMW X3 CAS MODULE ? It’s not under the steering wheel ?
Hello. bmw x3 is a EWS module :)
@@MadmanCarOk thank you for the reply ! Now I also have the same issue with a no crank no start do I just need to replace it and get a new key programmed for the vehicle ?
I don't know your situation,if you diagnose that ews is dead then if is need change write a new chip, and ISN synchronization with the old ECU
@@jayhernandez8160
Hello I have a bmw 745 li 2003 I changed my battery and not recognizes the key fob, it says “incorrect key” and throws me back the key fob when I put in in the key slot, should I reprogram the key or change the entire CAS and ECU and get a new key
Hello. resynchronization key and all working
Did you just transfer the processor chip without the EPROM chip?
А клон нельзв было слетать, перенести данные программатором?
Hello,where are you based ?
Hey I’m I’m having the same problem with my 2008 x5 4.8i it’s reading cas ews will this work and did you buy another module or modified the Original 1 ?? Thanks
hello. I buy another module
@@MadmanCar used or new pleaze
New or used CAS? Any coding or Programming after chip transfer or just Cas/DME resynchronization?
A0C2 no crank code
how do i fix this 05 bmw 645ci
did you found a solution ? my car have same a0c2, no crank, no start. Sometimes starts.
Hi Mr Madman how could I send u mines.. E90 no start.. Plenty of codes
Hello yes
Why not just clone it in 5mins?
How is that done
Why not just read data and write to donor cas? 🙄
Hello. because it was security processor i didn't have a device at this time
Xprog 5.55
This video is creepy 😂 heavy breathing and you can’t see what you are doing on the tablet
Da hewll???
Which scan tool is this
launch x431 pro
@@MadmanCar can it perform programming for mercedes & bmw?