Great videos John love the fact that your channel is a no bollocks or bullshit real down to earth fun engineering learning a lot along the way picked up a few tips for when I’m on my lathe all the best stay safe
Its always a pleasure to watch you using your machines John, learning so much from you...costing me a fortune though...every time i see something you have i end up buying it lol
Maybe you will make 100K by the end of the year and get one of those fancy buttons!! If that fella held in his plowing from the fence rows he could get a lot more work done! Just go back and plow the headlands when you are done.
Hi John , if you touch off with a 5mm cutter then change to a 6mm and go full depth surely that will make the slot 0.5mm too long. Not bad for a mechanic that pisses about though ; ) Love the vids.
He did say something like thats the full 12mm, but was it on the DRO or was he describing the length of slot, but you are correct and it is easy to overlook that extra 0.5mm
John how do you pay the iron monger for the steel and the transport company for the daily delivery - that plasma table has me in - Besides not being able to afford the initial table, the costs of the iron and daily delivery would kill me... Great video...
John, are you working at the garage, any? Glad for the extra content, but will be glad when you can return to work. Funny that Sweden didn't shut down, didn't ruin their economy, and are no worse off than anyone else medically.
Yes, but the Sweded do not have many pikeys who will do as they want. They are all pretty mucvh obeying the government suggestions and following them voluntarily. Not like outher countries where it is like herding a whole load of flocks of cats, dogs and chickens, all at the same time in the same place.
Thank you John,Always nice to some milling work done with such style.
Still one of the best, most honest and most genuine channels in my feed. Thanks John.
Thanks for keeping us all entertained John, all 75000 of us!
SAMRODIAN I second that !
thanks John, i realy like these extra posting....
Great work John. Thank you for sharing.
Great videos John love the fact that your channel is a no bollocks or bullshit real down to earth fun engineering learning a lot along the way picked up a few tips for when I’m on my lathe all the best stay safe
Thanks
Classic use of the "Eyecrometer" to centralise that tapped hole John.
Hope you, Debs, your Dad and all your family are keeping well.
George
Cheers John. I really appreciate your extra midweek video. It helps me get through the week. Stay safe and best wishes to all.
Thanks John, the extra Wednesday N C breaks the week up in these times. Myford clutch is looking great. best wishes to you all.
Thanks for the hard work you put I to the videos John...never mind 75k you deserve to get many more subscribers!
Congratulations on 75K. Always interesting and always something new to learn. All the best to you and yours.
Its always a pleasure to watch you using your machines John, learning so much from you...costing me a fortune though...every time i see something you have i end up buying it lol
You're right, that Mysterium comes out with a very nice finish. Makes me quite curious as to which alloy it truly is.
Hope you don't mind a poofy southerner looking in. Love the channel John.
If you're looking for an evening ploughing joke you'll not get it from me 🤣. Thanks for the video John. Take care. Roll on Sunday.
Thanks for letting us watch you pissin about in your workshop. Bunch of interesting content keeps it fresh and entertaining.
Nice to see a tractor John good vid as always.
Nice Wednesday jobbe.
Thanks for sharing.
Maybe you will make 100K by the end of the year and get one of those fancy buttons!! If that fella held in his plowing from the fence rows he could get a lot more work done! Just go back and plow the headlands when you are done.
Advice from a guy that knows. Something quite rare on the internet! Well done on the 75K John.
Nice machining on the Myford clutch part. I like the plasma cutting John its faster than drawing.
Thumbs up, and congrats on the subs John, stay safe!
Thanks John, goods as ever.👍
Mid week nightcap, great idea 👍🏻
Gday John, congratulations on reaching the 75k subs, bloody good effort mate, thanks for all the video you put out, take care
HI JOHN,, WELL DONE ON 75K.. REGARDS RICHARD.
Great video john thanks hope all your families ok
Good to see you're still at it John :-D Been quite a while since Mad Modders! Hope you're keeping well. Ralph :-)
Hi John , if you touch off with a 5mm cutter then change to a 6mm and go full depth surely that will make the slot 0.5mm too long. Not bad for a mechanic that pisses about though ; ) Love the vids.
I thought he he said that he stopped short at 11.5 with the 5, not sure if he ran it all the way to 12 on the DRO or just matched the radius.
He did say something like thats the full 12mm, but was it on the DRO or was he describing the length of slot, but you are correct and it is easy to overlook that extra 0.5mm
That plasma cutter is an impressive machine. It's not a spectator sport though.
John how do you pay the iron monger for the steel and the transport company for the daily delivery - that plasma table has me in - Besides not being able to afford the initial table, the costs of the iron and daily delivery would kill me... Great video...
John, are you working at the garage, any? Glad for the extra content, but will be glad when you can return to work. Funny that Sweden didn't shut down, didn't ruin their economy, and are no worse off than anyone else medically.
Yes, but the Sweded do not have many pikeys who will do as they want. They are all pretty mucvh obeying the government suggestions and following them voluntarily. Not like outher countries where it is like herding a whole load of flocks of cats, dogs and chickens, all at the same time in the same place.
Hi John I've been looking for a dog clutch for my myford m series lathe with no success,what's the chances of you making me one?
Can you email me
John your an absolute fucking legend, will you adopt me 🤭🤪 love what you do, take care pal
😷☕👍
when center find without a dro it's not "just as easy" you have account for backlash because of change in direction. it's not easy at all
Billy. Have a look at this video. th-cam.com/video/mLfiBUwWA80/w-d-xo.html
Easy enough just takes a little longer and a little thought.
You could use a dti, almost as quick as DRO.
as per brill
You're right, that Mysterium comes out with a very nice finish. Makes me quite curious as to which alloy it truly is.