Nice 2 have a video that actually finishes the job not ending the video half way through and telling you to watch part 2 that you can never find! Hope mine sounds that good supposed 2 get it back mid may..2.9 whipple,cooling mod, radiator,kooks long tube,alternator,oil pump,k member,powder coating,rxt mcleod twin disk hoping 2 go from 515 rwh to 700...
Did LT's on all my 03 cobra, when Kooks on 2 then BBK on the other. The sound of a 03/04 cobra with long tubes is one of the best sound v8's on the planet. Congrats!
I had this same set up with a catted h pipe and LM1's on a 03 Mach 1 and man it was loud as fuck! Literally sounded like a nascar circuit racer and that was with cats. It sounded good though man you'll love it when you get it done.
dumb question but i'm lazy...do they sell borla stingers in 3" only? Just thinking i may want that same header and o/r x... im currently on stock headers, bbk o/r x and borla stinger cat back. hate how low the bbk is though.
What pulleys are u running? I’m running 2.8 upper stock lower and with long tubes and 3in exhaust the pos only make s 550 With 60 pound injectors and a boost a pump
Ever since I lowered my car my drive shaft has been scrapping if I accelerate heavily, anyone know how to fix this? My 1997 mustang gt has a cobra transmission out of a 1997 mustang cobra does that have to do anything with it?
Mustang Lifestyle I broke a 14” breaker bar in the attent and tried with a 1/2” and 1” impact and nothing, heat ended up doing the trick on mine it was hell taking that bolt out! Glad it was better for you
I think I would just keep my short headers. I got rid of my long headers mine because they blocked the starter from being removed. I thought that was bad.
It drives me crazy too but I don’t have to look at often since I’m usually driving. Those brake lights are expensive and everything being done to the car is not cheap lol
wanna sell me your old manifolds? I need a set of factory or basic manifolds to turn them foward to fab up my 5.4(351 stroked), ford GT cammed, turbo 03 mustang project, just don't have a set of manifolds i can cut and weld to fit. Have the "C" 4V heads on the motor.
Music to the ears brother!!!! Keep it up with that bad build... Just my opinion here but man how cool would it be to add nitrous and have the nitrous purge come out the cobra sides and the front
Nice 2 have a video that actually finishes the job not ending the video half way through and telling you to watch part 2 that you can never find! Hope mine sounds that good supposed 2 get it back mid may..2.9 whipple,cooling mod, radiator,kooks long tube,alternator,oil pump,k member,powder coating,rxt mcleod twin disk hoping 2 go from 515 rwh to 700...
I need those long headers on my bullitt asap
Awesome video very nice 👍👍👍👍
Nick is the BIGG MAN ON THE MUSTANGS👍👍👍👍👍
Need that 3 inch catback...that much power it's gotta breathe
Yasssssss Letz Get it. Cobra action👍👍👍👍👍👍
Did LT's on all my 03 cobra, when Kooks on 2 then BBK on the other. The sound of a 03/04 cobra with long tubes is one of the best sound v8's on the planet. Congrats!
Beast mode engaged!
The cobra sounds so good I love it
Sounds naaassstttyyyyy AF. Cant wait to see more!
Chop, chop, chop
nick is as awsome macanic im one my self and iv seen alot of work dune over the years and he is very smart .
Nick Curtin?
I like the vacuum leak mod
The build is awesome man. I’m about to cop some merch!! 👕👕
Do it up man. We just got a bunch of shirts. And more key tags on the way! I can’t wait to dyno the car
Does the stock cat back bolt up directly to the x pipe, looking to do the exact same exhuast as you. But do not want to change bassani cat back
Dude the cobra sounds so fucking nasty!!! I’m IN love with it! 😍
Sounds awesome! Now I just gotta put longtubes on my mach 1!!!😀
I had this same set up with a catted h pipe and LM1's on a 03 Mach 1 and man it was loud as fuck! Literally sounded like a nascar circuit racer and that was with cats. It sounded good though man you'll love it when you get it done.
Finally!!!!! Been waiting for this build.
Yeah boy! Loving the build.
Were the factory exhaust manifold studs used or replaced with header bolts?
Have you got a Cam in that car?
I bet you had the same amount of fun putting those in that I had putting long tubes on my mustang
It was actually pretty easy
HEXYEAH man looking good as always
I thought MAC was having problems with their longtubes sucking up metal into the engines?
Sonds good man like the cobra a lot I'm trying to get one myself.
dumb question but i'm lazy...do they sell borla stingers in 3" only? Just thinking i may want that same header and o/r x... im currently on stock headers, bbk o/r x and borla stinger cat back. hate how low the bbk is though.
Cant wait for the next vid.
Can't wait till you try out the WOT 2step she gonna backfire alot 🤩🤩🤩🤩
That thang is chop chop!!!!’ 💪🏽💪🏽💪🏽👌🏽👌🏽
What pulleys are u running? I’m running 2.8 upper stock lower and with long tubes and 3in exhaust the pos only make s 550 With 60 pound injectors and a boost a pump
Cobra wants that 3” exhaust😍. Kooks full 3” catback🤤🤤🤤
$$$$
Mustang Lifestyle 🙍🏻♂️🙍🏻♂️💔
Look forward to seeing you guys Friday Night at Hooters! Where did you find it best to hook you engine support chains?
Wow Andrew love that loopy idle and a little pop at the end!! She sounds so sweet!
Ever since I lowered my car my drive shaft has been scrapping if I accelerate heavily, anyone know how to fix this? My 1997 mustang gt has a cobra transmission out of a 1997 mustang cobra does that have to do anything with it?
why does it sound so choppy with i'm assuming the stock cams?
Stock cams. Vacuum leak
ah makes sense, car is comin out sweet man! i hope to own one myself in the next year or so
cam that vacuum leak sounds sick tho lol
Que mofles le trai al cobra ?
I'm loving the exhaust sound. I can still smell 700 to the feet all day long.
Damn andrew that sounds awesome love the mustang lope
how much was the install?
Oh man that sounds nasty!
1 7/8 to 3inch all the out preparations for the Paxton
I did 1 7/8 kooks and upr kmember on my 03 looks and sounds awesome but lost ground clearance
When are you installing the 4lb lower?
Currently installing lol
Mustang Lifestyle in the same boat with my cobra lol finally broke the crank pulley loose this weekend 😂
Lol me too. Lee just helped me get it loose. I needed a second person
Mustang Lifestyle I broke a 14” breaker bar in the attent and tried with a 1/2” and 1” impact and nothing, heat ended up doing the trick on mine it was hell taking that bolt out! Glad it was better for you
Great video. I’m finally gonna do this to my car this winter. Your discount code doesn’t seem to work anymore.
Sorry about that Lethal got it fixed. “Mustanglifestyle” should work now
Sounds bad assssss
Fix that 3rd brake light brother 😂. Excited for the irs video!
Too bad MAC went out of business last year 😭
can you even make 700 rwhp on 1-5/8" headers?
Watch to find out :) but yes it’s been done a million times before
Yeap, made 785whp on mine with those
Header diameter affects the torque curve more then the peak number. It will have better street manners small tube.
January 1st is when I start my muscle car saving.
I think I would just keep my short headers. I got rid of my long headers mine because they blocked the starter from being removed. I thought that was bad.
If you won the lottery you should swap 2013 GT500 powertrain or even the 5.2 voodoo from new GT350 with twins
No need. This engine is just as capable as the '13 GT500 engine, weighs less, and fits better. Swapping a voodoo into Terminator would be a downgrade
Ive used the macs but also bought the cheap $180 ebay longtubes and I got to be honest, could not tell a difference.
Are the knock offs on ebay actually decent? Debating over bbk lmao dont wanna drop the money though
Dude...had no idea the stock manifolds were thhaaaatttt baaadddd. How could you make any power through that bs?
It made 605rwhp through them
Mustang Lifestyle i know..
Thats insane! Talk about bottle neck lol
Andrew, did you ever find the vacuum leak?
Yes it was at the pcv system
Glad you got it! I know from experience that finding it can be a real witch hunt! Cobra sounds n-a-s-t-y with those longtubes!!
That pop tho!
Is it cammed?? Sounds like she's got a cam...
Andrew you can never redo the cobra outro, if you do, you have to keep the song lol
Cobra 🐍 definitely needs a cam
Abner Ortega Cams *
With as much flow as that engine needed, I'm surprised Ford didn't put some sort of header from the factory?!?
What's going on with that blue MK6 in the back? Lol.
Pinche Cobra como esta bien perron ala verga 💪
Fix that damn 3rd brake light already...lol...its driving me up the wall....lmao..
It drives me crazy too but I don’t have to look at often since I’m usually driving. Those brake lights are expensive and everything being done to the car is not cheap lol
Mustang Lifestyle giving you shit..lol..love what you do and how far you've come..keep them coming..........now...you fix now:)
Less talk more car
Andrew the type of guy that doesn't know the difference between fortunately and unfortunately 🤣
Damnn sounds cammed
wanna sell me your old manifolds? I need a set of factory or basic manifolds to turn them foward to fab up my 5.4(351 stroked), ford GT cammed, turbo 03 mustang project, just don't have a set of manifolds i can cut and weld to fit. Have the "C" 4V heads on the motor.
Yeah send me a message on facebook
done
Music to the ears brother!!!! Keep it up with that bad build... Just my opinion here but man how cool would it be to add nitrous and have the nitrous purge come out the cobra sides and the front
ugh...MAC headers......
Dam 3rd
first finally lol
happy birthday