I'm using hover + conveyor drives, man, *SPEED IS LIFE* most of my planes have incredible turn performance (about 0.5 seconds for an entire loop) and speed (about 1000, only with hoverdrives.) but with a lot of turn performance it lacks precision, I really need to change up my ways of flying.
i made a darkstar and it cruises at 5000 and max at 1200, dont use controlled wing pannels since it make the plane unstable but use motor 2 control it doent shake
every time I use conveyor engines in my jets they do are turn in the sky and I cant stop it and just its annoying. and it happens when the speed is like 2000 or more but my bigger builds Don't have this problem. can be there not enough wings?
My issue is where i place a conveyor engine, no matter what I place it, my plane ends up spinning/yawing/pitching uncontrollably, and most of the planes that I make are supersonic or hypersonic planes.
@@orangejuice6266 it's obviously not as they managed to get very precise and non drone movements and managed to get extremely close to parts without shaking the camera
@@Destroyer554434 It doesn't work at all, like if it isnt touching the ground it doesn't work. Like if I put it suspended in the air it won't move at all
I don't like conveyor engines, they obviously make the jet extremely fast. However, it's very unrealistic and doesn't make sense, I know that the point of the game is to not make sense... But it's just annoying, the pilot would turn into soup from the speeds.. And it's not very good for PVP.
I'm using hover + conveyor drives, man, *SPEED IS LIFE*
most of my planes have incredible turn performance (about 0.5 seconds for an entire loop) and speed (about 1000, only with hoverdrives.) but with a lot of turn performance it lacks precision, I really need to change up my ways of flying.
This engine setup is amazing for aircraft like the sr-71 or sr-72.
@@myusername3689 i agree i use it for my sr 72 and it work like the best
Boringggg slow fights are more fun
That might just be the coolest intro i have ever seen
Awesome video! I loved the cinematic intro!!!
Hi fiery I watch you lol
@@paincrazy7149 furry?
Oooo hi firey your tutorials are really useful and epic!
Ayy, nice seeing you here Firey!
@@paincrazy7149 furry focx bear
I use conveyor engines and oh my God they are pretty fast.
I use them on SR-71 and Darkstar
Yes, they are pretty useful
@@hvsm7893 Same
Im doing a hipersonic missile with conveyor engine
i made a darkstar and it cruises at 5000 and max at 1200, dont use controlled wing pannels since it make the plane unstable but use motor 2 control it doent shake
Thanks for the tip now it will doesn't wobble or shake
you taught me how to make a deadly hypersonic missile thank you
is it something that needs to be set for the suspension? or is it just let alone?
i use a type of conveyor drive that uses 6 unpowered motors and 2 conveyors, i once went past 100k sps without going unstable using one.
make a shrimple tutorial
*slowly puts cutters*
every time I use conveyor engines in my jets they do are turn in the sky and I cant stop it and just its annoying. and it happens when the speed is like 2000 or more but my bigger builds Don't have this problem. can be there not enough wings?
I like the plane from the intro wha5 is i5 called?
My issue is where i place a conveyor engine, no matter what I place it, my plane ends up spinning/yawing/pitching uncontrollably, and most of the planes that I make are supersonic or hypersonic planes.
I love hitting mach 6 and pulling 90g's on my untuned conveyor drive
Me too!
Hah! I pull Mach 30 and 1840g’s in my supra !
I just rain down bullet storm with my cluster bomb with attached guns and cutters
how did you go into that spectator mode thing at 2:48?
@Hafizh utsman free cam
Hey can you please have a tutorial on how to make the two engines while being in a singular block
motorlock
idk how but i made a custom plane that goes 9000 with not this and uses ice..
Alright so one question, with the 2 suspension set up my jet literally goes crazy how can I stop that?
Either upgrade your internet or suffer
So as long as the conveyor is not anchored to anything it will work?
no
How ur jet get 9000 speed?and if it can be bigger than 1 so 1-2 suspension lenght will be good?
how do you do the free cam thing
Lets say i want to make a drag race car how do i keep the car stable and on the ground i find it at higher speeds to lose control or just start flying
Ballast blocks or engine pishing down
Hey, why is my plane kinda randomly twitching when I fly?
My conveyor drive glitches out very badly like its not it place how do i fix it
Make sure that noting interferes with it and that the suspension length is small enough to fit it in. Also try increasing the stiffness.
Me and my small jet powered by a hover drive: iNtErEsTiN'
IMO hover drives are better for jet main thrusters because you can control throttle but you could add conveyor drives for an after burner or something
im going to add this in my tomcat
do you still need super rocket engines tho?
no.
no, it would be very unstable
hover drives are better anyways
Na
@@sup_a well yeah but its pretty weak for big builds. so use conveyor its strong
I put one in the newest plane im making and whenever I take off not only does it not work that well but it bounces the plane around alot.
try lowering ur grafics or make bigger wings
that aint going to work,
When i add conveyor drive i turn it on and my plane spinning so fast, anybody know how to fix it?
Time to install an suspension drive on my 7000 block battleship
how did you go into spectator mode?
he used a camera drone or just got a friend to look at him
@@orangejuice6266 it's obviously not as they managed to get very precise and non drone movements and managed to get extremely close to parts without shaking the camera
Or he used an free cam script
@@orangejuice6266 it's a free cam -_-
fun fact: to reach mach 1 in plane crazy you have to go over 8000 ok im actually dumb lo
1 mach in this game is 1600sps
Your not wrong
I mean that’s reachable but how u figure that out
@@cxclone2852 the plane crazy speed is in studs per seconds and mach 1 is 1234.8 kmh
@@thatonepakistaniguy damn
I did the math and i think its 6855
So this is how they actually went hyperspeed in Star Wars
No
@@triplus198 Yes
for some reason my plane just keeps spinning when i try to use conveyor engines
How do you move the camera away from your plane?
Press c until your pov is default
@@frdex-l1n not what he meant, he meant freecam
Ok
@@mayhulk7514 that's not what i meant
thanks to this i made a flying carrier.
i cant reach 10000 speed .What ur secert to get 10000 speed ?
Why do you lock motors like that? Just set power to off
If he sets the power off the moter won’t lock properly
@@diamondwillgaming9083 I set power to off instead and they work exactly the same. What exactly would happen if he set it to off?
I find this hard because it wobbles easily and its IMPOSSIBLE to tune properly becasue at certain speeds it pitches up but at others it pitches down
my plane is 1x2 how do i fit this'
y-
you-
you don-
you dont.
bruh
I used the suspension conveyor engine in a plane and it goes 11000+
I farted really hard while watching this and it burned reallt really really rwally bad now Im diliking this and suing you
Wtf bro he did nothing. Tbh I’ll sue *you* for his trouble
Wtf bro he did nothing. Tbh I’ll sue *you* for his trouble
@@Boypogikami132 i am going to sue you
What plane is that?
Tysm fir making my big frigate move at 100 speed and it saves me space tysm
Can you put them on tanks?
Not recommended, but you can try
Make a big and very fast engine that will sink it into the void.
Confarter engine wtf 😳 😱
clown wtf 😳 😱
3:31 "Each of these engines are good in their own respect, but each have their *kinks* and bugs."
😳😳😳😳
Segsy 😳 😳 😳 😳 😳
engine sex when 😳😳😳
@@sup_a conveyor drive x magnet drive when
🥵🥵🥵
Wtf man
How do you stay stable?
By getting a better pc
@@ad.amchang lol
@@ad.amchang i need better advice
Thanks I really needed this :)
yes I can troll ppl in plane crazy with a hyper maneuver plane :>
PLS MAKE A TUTORIAL ON HOW TO PUT IN ON A F14
Completely of topic I challenge you to build a working Ekranoplane
I thought the title screen had lego 💀
normal people: haha super rocket engine speed
us:
Can you do engines for ships
im using this for my cube
I might need this bro
And could u make a tutorial for ur mig29 withconveryor engine pls
i put a double spring in my jet and is stable at 5000. i got it up to 5700
My conveyor drives don't go forward
I can't move at all with my 1700 block b29
I found new type of conveyor engine could reach 40000 speed if u have pro pc
if it showed instructions on how to build it it would be much better
I choose 1 power bcz 2 power to strong bruh with 4 hover drives and 1 conveyor engine i can reach 1000 after that my controls are jacked
It's over 9000!!!
Can you do tutorial on mig 29
Stop asking he won't do one
ya plus make it your self
Conveyer drive with suspension doesn't even work how wtf
Likely the conveyor or the suspension ends connecting to it cannot move, since there is a block connect to them.
@@Destroyer554434 It doesn't work at all, like if it isnt touching the ground it doesn't work. Like if I put it suspended in the air it won't move at all
@@Destroyer554434 does it need to be motor locked in order to work?
@@Lenevor No, but you certainly can
I think your problem is that you need to have it contact your own build, the air will not push it
@@Destroyer554434 ok I think I fixed it thank you. It also needs to be motor locked since it won't work if it isn't from my experience
19 hours and only 60likes, dang
mig 21 pfm at 9.3 be like
War Thunder?
wow theres not even a tip on how to fix the bug of the conveyor drive
it ruins my jet
Please describe your problem further
so basically everytime i add a conveyor drive to my su 30 pvp plane it kinda bugs/shake if i deploy do i have to remove the blocks that is blocking?
@@hiitsnothing I think that you may have either placed conveyor drive incorrectly or you just have a laggy or unstable Aircraft.
As if you have blocks intermingled with the conveyor, you DEFINITELY should remove the interfering blocks
oh
I thought ace combat 7 planes were stupid crazy
Bruh i was also building a mig-29
Yes I can escape a dam shreder
I become shredder to attack shredder
I don't like conveyor engines, they obviously make the jet extremely fast. However, it's very unrealistic and doesn't make sense, I know that the point of the game is to not make sense... But it's just annoying, the pilot would turn into soup from the speeds.. And it's not very good for PVP.
Yeah hover drive is better
It's good for spacecraft on maximum speed, but for jets I like the speed 10 - 20 better.
@@minecraftallminecraft7956 that's hellishly slow
so u just dont like that people can have fast jets and to survive and kill in pvp cause their too good so they never get shot down?
Makes sence
@@SillyAxolotl69 nah bro what you just said doesn't make sense
my jet keeps doing u turns
1block Conveyor Engines pls
No
I love sweden
I spent on laughing on sombody saying confarding 12 mins
Y E S
Mkeh
👍
Nice
JESUS CHRIIIiiiii-
Behold, the reason we all hate modern planes
olá
Sheesh
+9999999g
i use conveyor belt as a tank track
-worst mistake of my life
is this Useful or *N o ?*
useful for jets, not useful light planes etc
Conveyor physics are dead and we killed them
Tutorial on a tutorial? Just don’t use drives, get good at the game
Sounds like a skill issue
Lol cyber cry about it
Skill issue
believe it or not i was in the server with u once,display name: Chicken_Nugget
What plane is that?