For those of you who have a problem with "endless" or very long discaling, that what helped me: 1. After you start discaling and the first water tank runs empty, DO NOT REFIL IT while it is in the machine or before the machine stops the process - after it runs out of water it can suck some air (for 5-7 seconds) and then it stops. 2. Now you take out water tank, refil it and launch the rinsing (the indicator of discaling should be in the middle at that moment). NB: For some reason, after point 1 while I was refilling the tank, machine decided to go through all levels of coffee size, but apart from that nothing happend. So it looked like as if you were making a large coffee, but no other sounds rather than light indicator moving. After that the machine got the indicator back into the middle and let me start the rinse.
The lesson learnt is use 500ml of water and let it run out and and let the motor groan in protest, it will then enter the waiting mode and finish the process
Perfect result. The first time I did it I just filled the tank and nothing went to plan with the video but when I stuck to the detail of 500ml everything went according to plan. The devil is in the detail!
Thanks the video is poor instruction the written instructions are useless. Your explanation works perfectly. And why do they have irritating background music 😵💫
1, fill the water tank fully 2, start the descaling mode and wait until the tank is totaly empty 3, it will start blinking again so refill the tank fully 4, now it is on level 4 but it will push the water constantly
@@ИванИванов-щ4г3ч I have the same problem. Mine get's stuck on the 4th bar and not moving anymore. Noone says how long does it take, because i red somewhere that one guy had to fill the water 8 times until it was done. Ridiculous.
when it gets to 4 you just have to keep going until it blinks. it will take you about 15 minutes and you will have to refill the water tank various times.
@@denisstoica3298 when it gets to 4 you just have to keep going until it blinks. it will take you about 15 minutes and you will have to refill the water tank various times.
I tried following the instructions and all it does is the highest bar continually blinks with the descale light. It doesn’t make any noise or do anything. I noticed that the water was barely coming out when I brewed coffee so thought it must need to be descaled. Apparently there is something wrong with this machine. It’s been sitting here blinking on the highest bar for 5 minutes
I tried several times, and it didn’t work, it was only when I put exactly 500ml of water in the tank that it worked, I guess instructions are meant to followed to the letter 🤣
horrible design, horrible customer service, shame on you nestle. thousands of people stuck with this process. Why is it so hard to find the info for a regular cleaning process the product demands periodically? why is it not in the user manual? why can't I find it on the website? took me half a day to find this video together with extra comments needed. no info what each light means
when it gets to 4 you just have to keep going until it blinks. it will take you about 15 minutes and you will have to refill the water tank various times.
I tried following the instructions and all it does is the highest bar continually blinks with the descale light. It doesn’t make any noise or do anything. I noticed that the water was barely coming out when I brewed coffee so thought it must need to be descaled. Apparently there is something wrong with this machine. It’s been sitting here blinking on the highest bar for 5 minutes
For those of you who have a problem with "endless" or very long discaling, that what helped me:
1. After you start discaling and the first water tank runs empty, DO NOT REFIL IT while it is in the machine or before the machine stops the process - after it runs out of water it can suck some air (for 5-7 seconds) and then it stops.
2. Now you take out water tank, refil it and launch the rinsing (the indicator of discaling should be in the middle at that moment).
NB: For some reason, after point 1 while I was refilling the tank, machine decided to go through all levels of coffee size, but apart from that nothing happend. So it looked like as if you were making a large coffee, but no other sounds rather than light indicator moving. After that the machine got the indicator back into the middle and let me start the rinse.
It says in the video thats normal. It will give time for the solution to descale.
Ditto most helpful comment was about to Chuck it out 😂
Legend , thanks for the comment that worked for me
Thank you!! I thought my machine is broken but this worked.
The lesson learnt is use 500ml of water and let it run out and and let the motor groan in protest, it will then enter the waiting mode and finish the process
Oh it's supposed to complain. I was thinking hm, 500ml wasn't enough, wth? They said to use that much water 😂
Thanks! It worked lol.
Perfect result. The first time I did it I just filled the tank and nothing went to plan with the video but when I stuck to the detail of 500ml everything went according to plan. The devil is in the detail!
Thanks the video is poor instruction the written instructions are useless. Your explanation works perfectly. And why do they have irritating background music 😵💫
It works didn't have a problem descaling my machine
2 vez que faço vamos ver daqui quanto tempo aqui volto, 28/06/2024
Keep in mind that you will have to refill the water tank during this process for 7-8 more times!
I tried it but the signal is at level 4 and didnt go down what should i do
Yeah me too😢 i need help
1, fill the water tank fully
2, start the descaling mode and wait until the tank is totaly empty
3, it will start blinking again so refill the tank fully
4, now it is on level 4 but it will push the water constantly
The same here and i tried many times
Guys I was same but just finish the problem. Descaling again and don't use power strip, connect electricity directly. Good Luck
I've tried this many times and the orange light won't go out Im obviously doing something wrong any ideas
hi.. can you do this how to video for Genio S Touch too? it would be very helpful because I'm using that model.. thanks
pffff bonjour sa serai si simple de le marquer en francais par celui qui ne comprend l'anglais dur dur merci
@@didierbrouillard9154 ye serai aku nak masak ayam percik.. Ambik lebih sikit boleh? Terima kasih banyak yee
Tks for this vídeo! Yes! I CAN!
What they don’t tell you is you need a bout another FUCKING 1L of water
hey what can you do if you lose the plastic piece?
you can still use it without the plastic piece ;)
Hi, is there any home alternative to descaling solution? I can't buy it right bow
I put lemon juice works same
Half water, half white vinegar.
3 big scoops of Citric acid dissolved in water. That’s actually what the product is.
@@nancymedhat Thanks
Ne fonctionne pas. Tjrs orange
hello why is mine not descaling?? i did every thing that the video showed
Did you find a solution, mine is the same
@@ИванИванов-щ4г3ч I have the same problem. Mine get's stuck on the 4th bar and not moving anymore. Noone says how long does it take, because i red somewhere that one guy had to fill the water 8 times until it was done. Ridiculous.
have you find a solution?
@@عبدالوهابالعدواني-ت5ز No but i took it to a coffee machines place to fix it for me.
We found that you have to rinse several times til it finished descaling mode, didn't count exactly but I would say about 7 or 8 times.
HELP I BROKE MY WATER TANK WHERE CAN I FIND A REPLACEMENT
Дякую, все зробили. Без цього відео не могли правильно все зробити. На офіційному сайті в Україні немає інструкції до цієї моделі.
Ive done all that , my descaling light is still on!
needs descaling again
@laurasanchis312 we have same problem,descaling lights still blinking... what shall we do?
@@DRAGONLJ15same problem , some one got the solution?
when it gets to 4 you just have to keep going until it blinks. it will take you about 15 minutes and you will have to refill the water tank various times.
@@denisstoica3298 when it gets to 4 you just have to keep going until it blinks. it will take you about 15 minutes and you will have to refill the water tank various times.
pongan el manual en español
I tried following the instructions and all it does is the highest bar continually blinks with the descale light. It doesn’t make any noise or do anything. I noticed that the water was barely coming out when I brewed coffee so thought it must need to be descaled. Apparently there is something wrong with this machine. It’s been sitting here blinking on the highest bar for 5 minutes
I tried several times, and it didn’t work, it was only when I put exactly 500ml of water in the tank that it worked, I guess instructions are meant to followed to the letter 🤣
Deutsche version
😢
Ma un video in lingua italiana non esiste?????
horrible design, horrible customer service, shame on you nestle. thousands of people stuck with this process. Why is it so hard to find the info for a regular cleaning process the product demands periodically? why is it not in the user manual? why can't I find it on the website? took me half a day to find this video together with extra comments needed. no info what each light means
Scam machine. Button orange still ON
Do it again
He don not stop at level 4. Worthless system
Let the tank empty completely for 2-3 seconds, then it should show it is at level 3. Then you take out tank, add more water and it should work!
when it gets to 4 you just have to keep going until it blinks. it will take you about 15 minutes and you will have to refill the water tank various times.
I tried following the instructions and all it does is the highest bar continually blinks with the descale light. It doesn’t make any noise or do anything. I noticed that the water was barely coming out when I brewed coffee so thought it must need to be descaled. Apparently there is something wrong with this machine. It’s been sitting here blinking on the highest bar for 5 minutes