You will need the following tools : ① Screwdriver iink.club/screwdriver ② Brush iink.club/brush ③ Oppening tool (blue) iink.club/tool Full tutorial on my channel :)
@@Stonesfann According to his link, a Tx40 which means the cutter head size=6,6 mm. I guessed the article purchased was the 1st one in that list and I consulted the product info page, there on Amz. Hope this helps. you.
1) Separate the body from the upper part 2) Remove the cap by pressing both sides 3) Try moving it manually by rolling the part with the tweezers 4) Does it roll ? 5) Open it (full tutorial on my channel) 6) Is there hair stuck inside ? 7) Try removing the hair like in the video If there is no hair and you cannot even roll the tweezer part manually, it might be time to buy a new one : iink.club/headflex
Where did you get the tools, especially the blue one, pls?
You will need the following tools :
① Screwdriver iink.club/screwdriver
② Brush iink.club/brush
③ Oppening tool (blue) iink.club/tool
Full tutorial on my channel :)
What size screwdriver please?
@@Stonesfann According to his link, a Tx40 which means the cutter head size=6,6 mm. I guessed the article purchased was the 1st one in that list and I consulted the product info page, there on Amz. Hope this helps. you.
amzn.to/3UBaO90
Mine isn’t spinning is it done with?
Does the part attached to the body spin if your remove the head ?
@@cyclepil yes
1) Separate the body from the upper part
2) Remove the cap by pressing both sides
3) Try moving it manually by rolling the part with the tweezers
4) Does it roll ?
5) Open it (full tutorial on my channel)
6) Is there hair stuck inside ?
7) Try removing the hair like in the video
If there is no hair and you cannot even roll the tweezer part manually, it might be time to buy a new one : iink.club/headflex
@@cyclepil thank you I will follow those steps and I do believe there is a hair stuck inside
@@cocofleur7298 If you use TH-cam with the App, you can answer this comment with a short video. Upload one if you need guidance. Good Luck !